Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Non-contact measurements of water jet spreading width with a laser instrument

Jet spreading width is one of the important characteristics of water jets discharging into the air. Many researchers have dealt with measuring this width, and contact measuring methods on the water jet surface were employed in a lot of the cases. In order to avoid undesirable effects caused by the contact on the jet surface, we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width. In measurements, a transmitter emits sheet-like laser beam to a receiver. The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow. The minimum and maximum values of the shadow width are measured. In addition, pictures of the water jet are taken with a scale, and the shadow width is measured from the pictures. The experiments on various needle strokes were performed. Three kinds of width consistent with the jet structure were obtained. In the results, it can be concluded that our non-contact measuring methods are feasible. The data of jet spreading widths and jet taper were obtained and are useful for future applications.     

Evaluation of Young’s modulus of imprinted hydrogen silsesquioxane pillar after residual layer removal by reactive ion etching

Nanoimprint lithography has two basic steps. The first is the imprint step in which a mold with nanostructures on its surface is pressed into a resin film on a substrate, followed by removal of the mold. The second step is the residual layer removal by a reactive ion etching (RIE). There is no report whether the properties of the imprinted structure after RIE change or not. In this work, the authors evaluated the Young’s modulus of the imprinted pillar after residual layer removal by RIE. In this experiment, hydrogen silsesquioxane (HSQ), a type of spin-on-glass, was used as an imprint material. The residual layer was etched by RIE using CHF₃ gas. The Young’s modulus of imprinted pillar after RIE was measured via cantilever method. The Young’s modulus of HSQ pillar after RIE was twice as much as that of HSQ pillar before RIE. From the Fourier transform infrared measurement, it was founds the chemical structure of HSQ was changed by forming network structure due to heating by RIE plasma energy. These results indicate that the mechanical property of imprinted structure was changed in the residual layer removal step by using RIE.     

Experimental investigation on optimization of invert trap configuration for sewer solid management

Invert traps have been successfully used to collect sediments at convenient locations within the sewer network, where large volumes of solids can be stored. In the present study, experiments have been performed in 15 cm wide and 5 m long channel for the measurement of retention ratios of five different invert trap configurations (namely, rectangular, trapezoidal with one side vertical, trapezoidal, trapezoidal with rectangular base, rectangular with trapezoidal base) having top width of 32 cm and depth of 28 cm with slots of three different sizes (namely, 5, 9 and 15 cm) for the flow of seven different sediment types (namely, two types of sand, glass beads and four types of plastic beads) at different flow rates for each trap. The flow rates selected in present study cover entire range of flow rate expected in channels during dry weather flow and monsoon. Flow field and retention ratio predictions for each invert trap configuration have been carried out using CFD modeling with the help of FLUENT software using Renormalization Group (RNG) k–ε along with Discrete Phase Model (DPM). The simulation results are capable of showing particle trajectories, the effect of flow rate and trap geometry on the flow patterns, developed within the trap. Based on CFD modeling and experimental measurements, it is concluded that the invert trap having rectangular shape with trapezoidal base is the most efficient trap configuration with highest sediment retention ratio.     

API X52管线钢与Corus RQT 701超高强钢的焊接工艺

针对超高强钢在机械行业的广泛使用,焊接接头易出现淬硬脆化、裂纹等缺陷的情况,采用焊条电弧焊(SMAW)和药芯气体保护焊(FCAW-GS)组合的焊接方法,对API X52管线钢与Corus RQT 701超高强钢的焊接进行了工艺试验,并进行常规力学性能试验。结果表明,通过合理匹配焊接工艺参数,严格控制低热输入量及层间温度,实现了小熔合比的异种钢焊接,且焊接接头具有良好的力学性能,达到了标准和规格书的要求;异种高强钢焊接,采用SMAW打底焊接和FCAWGS填充并盖面的方法,焊接效率较单纯采用焊条电弧焊工艺提高2倍以上。     

Colored amorphous silica-based powder with TiN nanocrystals precipitated by ammonolysis of Ti–Si–O ternary glass

Coloration of amorphous silica powder containing titania was investigated by nitridation in an ammonia flow. The oxide precursors were obtained by the hydrolysis of a mixture of tetraethyl orthosilicate (TEOS) and tetrabutoxy titanium (TBT). The color changed with the amount of TBT in the mixture, the hydrolysis pH and the ammonolysis temperature. The original white color of the 8 mol% TBT powder hydrolyzed under basic pH conditions changed to pale goldenrod at 700°C, then to dark olive green at 800°C, and further darkened with increasing ammonolysis temperature. A steel-blue color appeared at 900°C for the powder obtained with 3 mol% TBT, and increased in darkness at 1000°C. A similar bluish color was observed for powders obtained by acidic hydrolysis after ammonolysis above 900°C, and this was independent of the amount of titania, although the chroma decreased with increasing firing temperature for the powder with 3 mol% TBT. The ammonolysis powder products were characterized using X-ray diffraction (XRD), electron probe micro analysis (EPMA), transmission electron microscopy-electron energy-loss spectroscopy (TEM-EELS), scanning transmission electron microscopy-high-angle annular dark-field imaging (STEM-HAADF) and Ti–K edge X-ray absorption fine structure (XAFS). The color change was related to both precipitated TiN nanocrystals and residual titanium in the amorphous silica matrix. The TiN exhibited a goldish reflection and also plasmonic absorption from light blue to gray depending on the TiN crystallite size. The plasmonic absorption and resonance of nanocrystalline TiN will be useful similarly to that of gold in nanotechnology for various kinds of energy application.     

Investigation of Alkali‐Ion (Li,Na, and K) Intercalation in KxVPO4F (x ∼ 0) Cathode

This work compares the intercalation of K, Na, and Li in K_xVPO₄F (x ～ 0). The K_xVPO₄F (x ～ 0) cathode delivers reversible capacities of ≈90–100 mAh g^?1 in K, Na, and Li cells, at an average voltage of ≈4.33 V for K, ≈3.98 V for Na, and ≈3.96 V for Li. This is so far the highest average voltage known for a K‐intercalation cathode. The lower voltage of Li insertion compared to Na is attributable to undercoordinated Li ions in the K_xVPO₄F (x ～ 0) framework. While the material shows high rate capability for all the alkali ions, Li migration in K_xVPO₄F (x ～ 0) is more difficult than with Na and K. This work suggests that a large cavity is not always good for insertion of alkali ions and cathode materials need to be suitably tailored to each intercalating ion species.     

Predicting the Life Span of Dies Used for Soft Magnetic Core Motors

This paper describes a method of predicting the life span of the dies used in motor manufacture from soft magnetic composites (SMCs). In the present study, a clawtooth motor was used. The method involves performing a stress analysis of a die followed by fatigue testing of test pieces. In the analysis, the SMC was assumed to be in powder form and its yield function was derived by a simple method. In addition to the analysis, we describe a simpler and more effective method in which the properties of the SMC are treated as boundary conditions. In the fatigue tests, we used test pieces that simulated the shape and construction material of the die. To predict the life span of the die, we evaluate the SN diagram, which represents the relationship between the maximum stress and fatigue life with respect to the stress generated in the die. The life expectancy of a new die, which is about 100 cycles of use, is found to agree substantially with its actual life. Furthermore, we explain how to extend the life span of a die to the targeted life span, namely, more than 200,000 cycles of use, by changing its shape to reduce stress.