A three-phase symmetrical multistage Voltage multiplier

A three-phase symmetrical Cockcroft-Walton (CW) multistage voltage multiplier (VM) is proposed. It consists of one smoothing column and six oscillating columns. The oscillating columns are connected to three-phase power through center-tap transformers. The capacitors of the smoothing column are charged six times per cycle by six oscillating columns and are discharged six times through the load, unlike the conventional symmetrical VM in which they are charged and discharged twice per cycle. The three-phase symmetrical structure completely eliminates the first five harmonic components of load-generated voltage ripple. Theoretical analysis indicates that the proposed three-phase symmetrical CW-VM has one-third the voltage ripple and voltage drop of the conventional single-phase symmetrical CW-VM. Experimental and simulation results of the proposed three-phase symmetrical CW-VM as well as of the conventional single-phase symmetrical CW-VM are presented. A comparison shows that the three-phase symmetrical CW-VM has significantly less voltage ripple, half the voltage drop, and a fourfold increase in output power over the conventional single-phase symmetrical CW-VM.     

Way forward in meeting energy challenges in Pakistan

In this review the energy potential of Pakistan from hydro, coal, wind, solar and nuclear sources has been discussed. The new projects that are being commissioned on coal, wind, solar, hydel and nuclear-based technologies have also been mentioned. The review has also explored the future prospects of the country’s energy requirements. Pakistan has potential to produce 100,000?MW of electricity from Thar coal for 20 years, 56,000?MW of hydroelectricity, 150,000?MW of wind energy and ～50,000?MW from solar sources. The coal-fired power generation is expected to 11,500?MW in period 2017–2019. The country is moving in the right direction to cater its energy needs. However, there is a need to find local and foreign investment in the country to meet high energy demands in the country in future.     

Effect of plasma treatment and electron beam radiations on the strength of nanofilled adhesive‐bonded joints

This investigation highlights the adhesion performance of carbon fiber‐ and glass fiber‐reinforced polyphenylene sulfide when joined by high‐performance neat epoxy adhesive and nanofilled epoxy adhesive. A significant increase in the surface energy of these materials is observed after the surface modification with atmospheric plasma treatment. An increase in surface roughness is observed after exposing the surface to plasma. Lap shear testing of untreated and plasma‐treated joints is carried out to correlate the improvement in adhesion properties with the joint strength. A considerable increase in joint strength is observed when the surfaces of these materials are modified by atmospheric pressure plasma. There is a further increase in joint strength when the composites are joined by nanofilled epoxy adhesive, and subsequent exposure to electron beam radiations results in minor increase in the joint strength. Finally, the fractured surfaces of the joints are examined and the analysis is performed. POLYM. ENG. SCI., 50:1505–1511, 2010. © 2010 Society of Plastics Engineers     

Fuzzy Self-tuning PID Controller for Speedtronic Governor Controlled Heavy Duty Gas Turbine Power Plants

Heavy duty gas turbine power plants may cause severe instability in grid connected operation under load fluctuations. To overcome such instability problems, an attempt has been made to develop proportional-integral-derivative controller for all the heavy duty gas turbine models with Speedtronic governor. Proportional-integral-derivative gains are tuned by Ziegler-Nichols and performance index methods and the step responses are obtained by using MATLAB/Simulink considering various droop settings. Simulation results of all the models reveal that the integral of squared error tuned proportional-integral-derivative controller provide better response. In order to improve the stability further, fuzzy self-tuning proportional-integral-derivative controller has been proposed in this article for all the heavy duty gas turbine models. On analyzing the simulation results, the proposed fuzzy self-tuning proportional-integral-derivative controller is found to be adaptive for all the heavy duty gas turbine models irrespective of the droop settings and yield better transient and steady state responses than Ziegler Nichols and Performance index methods.     

Proteins and trypsin inhibitor activity of guar (Cyamopsis tetragonoloba L. Taub) seed

Proteins soluble in tris-acetate buffer (pH9.0) were fractionated by DEAE-cellulose, DEAE-Sephadex A-50 and Sephadex G-200 column chromatography. The purified proteins which contained 5–6% carbohydrate, had molecular weights of 125 900 and 22 390 amu. The high molecular weight fraction was homogeneous by polyacrylamide gel electrophoresis. Proteins extracted in phosphate buffer (0.1M , pH7.6) when subjected to Sephadex G-200 gel chromatography were resolved into three fractions, all of which showed considerable trypsin inhibitor activity. Germination for 3 days reduced the trypsin inhibitor activity of the seed by about 30%.     

Self-developing fuzzy expert system: a novel learning approach,fitting for manufacturing domain

The foremost challenge faced by expert systems, for their applicability to real world problems, is their inherent deficiency of dynamism. For an expert system to be more pragmatic and applicable, the whole structure of an expert system—including rule-base, fuzzy sets, and even user-interface—needs to be upgraded continuously. This continuous up gradation demands full-time, repetitive, and cumbersome involvement of knowledge engineers. Machine learning is an answer to this problem, but unfortunately, the solutions that have been provided are limited in scope. For example, most of the researchers put forward techniques of either generating just rules from data, or self-expanding and self-correcting knowledge-base only. The innovative approach presented in this paper is broader in scope. It enhances the efficacy and viability of expert systems to be more capable of coping with dynamic and ever-changing industrial environments. The objective is facilitated by rendering, concurrently, the self-learning, self-correcting, and self-expanding abilities to the expert system, without requiring knowledge engineering skills of the developers. This means that the user needs just to feed data in form of the values of input/output variables and the complete development of expert system is done automatically. The superiority of the proposed expert system, regarding its continuous self-development, has been explained with the help of three examples related to prediction and optimization of milling and welding processes.     

Controlled-release naproxen using micronized ethyl cellulose by wet-granulation and solid-dispersion method

This study has been undertaken to develop a controlled-release tablet dosage form of naproxen using ethocel (ethyl cellulose) as the rate-controlling polymer. The formulations were made by employing the conventional wet-granulation method and the solid-dispersion method. Tablets made by both methods were compared for their controlled-release dissolution profiles. Both methods were useful in developing the controlled-release formulations of naproxen with desirable properties. However, the amount of polymer required to make a formulation with the desired release profile was 33% less via solid dispersion than via wet granulation. A cumulative 88% of naproxen was released from the solid-dispersion formulation, compared with 84% from the wet-granulation formulation.     

Study of carbon dioxide condensation in chevron plate exchangers; heat transfer analysis

The experimental investigation of carbon dioxide condensation in brazed plate heat exchangers is the main objective of this study. The current level of concern for the environment is at an all time high, therefore, it is important to look into methods and resources that lead to a cleaner and healthier future for the planet. This study details one such effort to reach this goal, focusing on condensation of carbon dioxide as a natural refrigerant in refrigeration systems. Three brazed plate heat exchangers with different geometry, each consisting of three channels, are tested. This paper focuses on the two-phase analysis, where carbon dioxide was the working fluid, flowing through the middle channel, and dynalene brine, the cooling fluid, flowed through the side channels of each geometry. Condensation of carbon dioxide occurred at saturation temperatures ranging from ?17.8 °C to ?34.4 °C and heat fluxes spanning 2.5–15.7 kW/m². An in-depth dimensional analysis was completed on the two-phase data yielding heat transfer correlations. Relationships of the two-phase heat transfer characteristics are presented, the data are compared with related studies, and conclusions are made from the two-phase data.