Assessment and applications of wind energy in Jordan

A technical and economic assessment has been made of the generation of electricity using windmills located at three most promising potential wind sites in Jordan: Ras Muneef (RA), Mafraq (MF), and Aqaba (AQ). The assessment was made for two different systems, one using a relatively large single windmill and the other using 25 small windmills arranged in a wind farm. The power output of each system at each site was determined, and the electricity-generating costs in each case were also determined and compared with the generating costs of generating electricity using steam or gas turbines, furnished by the Jordanian Electricity Authority (JEA).Finally, the possibility of water pumping from 30-m and 100-m deep wells using a windmill is investigated and the quantities of water pumping from these depths at each of the three sites are given.     

Strategies for ideal indoor environments towards low/zero carbon buildings through a biomimetic approach

Biomimicry is a relatively new discipline of applied science that seeks inspiration from natural systems for innovative solutions to human problems. Taking nature as ‘model, mentor and measure’ receives wide acceptance in the field of architecture but predominantly in conceptualising novel forms. The biomimicry concept is comprehensively analysed for its ability to provide more sustainable and possibly even regenerative built environments. As part of this study, first, various frameworks for approaching ‘biomimicry’ in general are discussed and then relevant examples pertaining to architecture are evaluated. Case studies are critiqued with respect to varied levels of sustainability achieved and its causative factors. In the second part, an approach model for ‘biomimetic architecture’ in the context of Mumbai is presented and applicable strategies based on climatic adaptation are suggested using local biodiversity as a library of organisms. The generic example of ‘human skin’ addressing the same adaptation is analysed and complemented by a state-of-the-art case study on similar lines. The results achieved clearly reveal that biomimicry is a successful approach to design and operate the sustainable built environments for the buildings of the future.     

Evolution of Microstructure and Texture During Warm Rolling of a Duplex Steel

The effect of warm rolling on the evolution of microstructure and texture in a duplex stainless steel (DSS) was investigated. For this purpose, a DSS steel was warm rolled up to 90 pct reduction in thickness at 498 K, 698 K, and 898 K (225 °C, 425 °C, and 625 °C). The microstructure with an alternate arrangement of deformed ferrite and austenite bands was observed after warm rolling; however, the microstructure after 90 pct warm rolling at 498 K and 898 K (225 °C and 625 °C) was more lamellar and uniform as compared to the rather fragmented and inhomogeneous structure observed after 90 pct warm rolling at 698 K (425 °C). The texture of ferrite in warm-rolled DSS was characterized by the presence of the RD (〈011〉//RD) and ND (〈111〉//ND) fibers. However, the texture of ferrite in DSS warm rolled at 698 K (425 °C) was distinctly different having much higher fraction of the RD-fiber components than that of the ND-fiber components. The texture and microstructural differences in ferrite in DSS warm rolled at different temperatures could be explained by the interaction of carbon atoms with dislocations. In contrast, the austenite in DSS warm rolled at different temperatures consistently showed pure metal- or copper-type deformation texture which was attributed to the increase in stacking fault energy at the warm-rolling temperatures. It was concluded that the evolution of microstructure and texture of the two constituent phases in DSS was greatly affected by the temperature of warm rolling, but not significantly by the presence of the other phase.     

The application of internal grading system technologies for agricultural products – Review

Quality assessment of agricultural products has been the subject of numerous reviews; however, not many papers address internal visualization as a means of quality grading. This paper reviews established as well as emerging visualization techniques utilized in the quality assessment of food products. In this discourse, the authors set out to underscore some of the most novel signal processing techniques employed in the non-destructive grading of agricultural products by way of an automated quality verification system. Such systems utilize advanced engineering principles with imaging, signal processing as well as color differentiation to accomplish the grading task. The materials presented will be useful to agricultural engineers, manufacturing engineers, food engineers and any other researchers in the food and agriculture industries.     

Effect of self etching ceramic primer and universal adhesive on bond strength of lithium disilicate ceramic

The clinical success of ceramic restorations is affected by the ceramic bonding procedure. The objective of the study was to evaluate the effect of different surface treatments, including the use of self-etching ceramic primer (SECP), on resin cement-glass ceramic bond strength. Thirty lithium disilicate ceramic (LDC) rectangles (3 mm × 3 mm × 8 mm) were fabricated Specimens were randomly assigned into three experimental groups (n = 10) according to the surface treatment: Group 1-hydrofluoric acid [HF acid]+ silane + universal adhesive; Group 2-HF + universal adhesive; Group 3-SECP + universal adhesive. All specimens were stored in distilled water for 24 h at 37 °C and shear bond strength (SBS) was tested at a crosshead speed of 0.5 mm (Universal Testing machine-Instron). Failure modes were evaluated using a digital microscope for all specimens. Analysis of variance and the Tukey post hoc tests using SPSS (Version 22.0, IBM, New York, USA) were used to analyze data. The SBS of groups 1 (19.74 ± 1.28 MPa) and 3 (21.11 ± 2.07 MPa) were significant higher than group 2 (14.80 ± 1.94 MPa). The SBS values for specimens in groups 1 (19.74 ± 1.28 MPa) and 3 (21.11 ± 2.07 MPa) were comparable. Adhesive, mixed and cohesive failure modes were observed and mixed failure was the most common in all groups. Therefore, the use of SECP and universal adhesive is recommended as an alternative to the use of HF acid in combination with ceramic primer while bonding to LDC.     

Differential spectral responsivity measurement of photovoltaic detectors with a light-emitting-diode-based integrating sphere source

We present an experimental realization of differential spectral responsivity measurement by using a light-emitting diode (LED)-based integrating sphere source. The spectral irradiance responsivity is measured by a Lambertian-like radiation field with a diameter of 40 mm at the peak wavelengths of the 35 selectable LEDs covering a range from 280 to 1550 nm. The systematic errors and uncertainties due to lock-in detection, spatial irradiance distribution, and reflection from the test detector are experimentally corrected or considered. In addition, we implemented a numerical procedure to correct the error due to the broad spectral bandwidth of the LEDs. The overall uncertainty of the DSR measurement is evaluated to be 2.2% (k = 2) for Si detectors. To demonstrate its application, we present the measurement results of two Si photovoltaic detectors at different bias irradiance levels up to 120 mW/cm(2).