基于图像的虚拟环境建模技术

综述了基于图像的虚拟现实环境的建模技术，并给出了各种模型表示的理论依据和建模过程的定义。把环境表示分为四类：全景图，光场数据库，深度图像和多投影中心图。全景图的生成包括基于图像相关性和基于图像整合变换的算法。光场数据库的分类主要依据全光函数。同时论述了在各种表示下的采样和建模技术。最后讨论了当前建模技术研究的热点及所需要解决的问题。     

GPS交通调度管理系统的设计与仿真

GPS技术为各种交通工具提供了实时导航定位能力,GPS车辆交通调度管理系统利用全球卫星定位系统、全球移动通信系统、地理信息系统,结合计算机网络通信技术对车辆进行指挥调度和监控.驾驶员和监控中心能够随时通过GSM短消息业务中心传送和查询指定车辆的GPS定位信息.仿真验证了车载导航定位子系统及基站采用的伪距解算软件.     

Tight upper bound on the number of edges in a bipartite K3,3-free or K5-free graph with an application

We show that an n-vertex bipartite K_3,3-free graph with n?3 has at most 2n−4 edges and that an n-vertex bipartite K₅-free graph with n?5 has at most 3n−9 edges. These bounds are also tight. We then use the bound on the number of edges in a K_3,3-free graph to extend two known NC algorithms for planar graphs to K_3,3-free graphs.     

西北江三角洲来水来沙的非线性分形特征

根据西、北江干流高要、石角及西北江三角洲网河区顶点马口、三水四个水文站的流量和含沙量资料 ,应用非线性分形原理的R S方法 ,计算西北江干流及西北江网河区顶点四个水文站的流量、含沙量的赫斯特数H和分形维数D ;探讨西、北江干流来水来沙的分形特征及西北江三角洲的分水分沙规律。结果表明 ,流量的分维数略大于含沙量的分维数 ,三水站流量及含沙量的分维数与其上游的石角站流量、含沙量的分维数相差较大 ,与思贤的分水分沙造成西北江的水沙交换有关     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

Variations in Spectral Slope in Lake Taihu,a Large Subtropical Shallow Lake in China

Spectral slope (S), describing the exponential decrease of the absorption spectrum over a given wavelength range, is an important parameter in the study of of chromophoric dissolved organic matter (CDOM) dynamics, and also an essential input parameter in remote sensing models. Furthermore, S is often used as a proxy for CDOM composition, including the ratio of fulvic to humic acids and molecular weight. The relative broad range in S values reported in the literature can be explained by the different spectral ranges and fitting methods used. A single exponential model is used to fit the S values for 17 investigations involving 458 samples in Lake Taihu from January to October in 2004. The average S value was 15.18 ± 1.39 μm⁻¹ for the range of 280–500 nm, which fell within the range reported in the literature. The frequency distribution of S value basically obeyed a normal distribution. Significant differences in S values between summer and other seasons showed that phytoplankton degradation was one of the important sources of CDOM in summer, whereas CDOM mainly came from the river input in other seasons. Furthermore, the estimated S value decreased with increasing wavelength range used in regression. The maximum and minimum values derived from the regression were 17.89 ± 1.25 μm⁻¹ and 13.62 ± 2.11 μm⁻¹ for the wavelength ranges of 280–380 nm and 400–500 nm, respectively, a decrease of 23.9%. S values significantly decreased with the increase of CDOM absorption coefficients. CDOM absorption coefficients could be more appropriately estimated from exponential model introducing the variation of S with absorption coefficients, making them useful for a remote sensing bio-optical model of Lake Taihu. DOC-specific absorption coefficient a*(λ) and the parameter M describing molecular size of the humic molecules could also be used as a proxy for the sources and types of CDOM. A general relationship was found between S and a*(λ), and M values. S increased with the decrease of DOC-specific absorption coefficient and the increase of M corresponding to the decrease of molecular weight.     

解析曾懿《中馈录》——兼论川菜菜系雏形的形成

川菜菜系不是短时间内突然出现的,它有一个萌芽、雏形(开始形成)、成熟和发展的过程。本文尝试通过解析川菜经典食谱之一的曾懿《中馈录》,来探讨川菜菜系雏形的形成。     

勇闯十字路口:祝贺《建筑创作》100期

《建筑创作》出刊已100期,它不仅发表了许多令人赞赏的建筑作品,许多发人深思的文章,而且组织茶室、考察、访旧等活动,已经成为我国建筑文化研究和开拓的一个中心.希望它越办越好.……     

On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

基于项目的大学英语在线合作学习研究

本文根据教育部外语教学改革的总体要求和建构主义教学理论，总结了两年来作者将计算机技术和网络资源整合于大学英语教学，开展基于项目的大学英语在线合作学习研究的探索和实践。