Trunking capacity estimation for wide area multicell private mobile radio networks

In this paper, we propose a more realistic trunking capacity estimation for full duplex voice calls under call queuing strategy for multicell private mobile radio networks (PMR), such as TETRA (terrestrial trunked radio). The traditional approach has been based on a simple delay system (Erlang C). However, the generated calls can be classified in two different types: inter-site and intra-site calls, with different requirements of resource occupation. We show a numerical way of estimating the system capacity for mixed inter-site and intra-site voice calls and compare the curves obtained as a result of this new point of view with the Erlang C curves. Results show that this new approach allows to get more accurate capacity estimation in the performance analysis of the system.     

Laboratory evaluation of recycled construction and demolition waste for pavements

The wide production of construction and demolition waste and its illegal deposition are serious current problems in Brazil. This research proposes to evaluate the feasibility of using aggregate from recycled construction and demolition waste (RCDW) in pavement applications. A laboratory program was conducted by geotechnical characterization, bearing capacity and repeated load triaxial tests. The results show that the composition and the compactive effort influence on the physical characteristics of the RCDW aggregate. The compaction process has promoted a partial crushing and breakage of RCDW particles, changing the grain-size distribution and increasing the percentage of cubic grains. This physical change contributes to a better densification of the RCDW aggregate and consequently an improvement in bearing capacity, resilient modulus and resistance to permanent deformation. The results have shown that the RCDW aggregate may be utilized as coarse base and sub-base layer for low-volume roads.     

Parallel and sequential block Kalman filtering and theirimplementations using systolic arrays

Two sets of block Kalman filtering equations that differ in the manner of generating the initial and updated estimates are derived. Parallel and sequential schemes for generating these estimates are adopted. It is shown that the parallel implementation inherently leads to a block Kalman estimator which provides filtered estimates at the vector (block) level and fixed-lag smoother estimates at the sample level. The sequential implementation scheme, on the other hand, generates the estimates of each sample recursively, leading naturally to a scalar (filter) estimator. These scalar estimates are arranged in a vector form, resulting in a block estimator which solely generates filtered estimates both at the vector and sample levels. Simulation results on a speech signal are presented which indicate the advantages of the sequential block Kalman filter. An algorithm for iterative calculation of Kalman gain and error covariance matrices is given which does not require any matrix inversion operation. The implementation of this algorithm using available systolic array processors is presented. A ring systolic array which can be used to implement the state update part of the block Kalman filter is suggested     

Mechanical and morphological characterization of starch/zein blends plasticized with glycerol

Blends of starch and zein plasticized with glycerol were prepared by melting in a batch mixer at 160°C. Glycerol was used as plasticizer in contents ranging from 20 to 40 wt % with respect to the starch/zein matrix. These blends were characterized by mechanical tests, dynamic mechanical analysis, and optical microscopy. In tensile tests, the Young's modulus and ultimate tensile strength increased with increasing zein content for all compositions, whereas elongation at break decreased sharply with increasing zein content up to 20%, and it remained nearly constant at higher contents of zein, which increased the stiffness of the blends. On the other hand, increase in the glycerol content caused a decrease in mechanical resistance of the blends. Storage modulus increased with increasing zein content and the tan δ curves showed that the blends exhibited two distinct glass transitions, one for each component, indicating a two‐phase system, confirming the morphological evidence of micrographs that displayed two separate phases. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4133–4139, 2006     

Segmentation of video sequences for partition tree generation

In this paper we propose a segmentation structure to generate a partition tree with multiple partition proposals. These multiple partitions are obtained for every image in a hierarchical way, from the coarsest one to the finest one. Time evolution of the regions is defined through a projection step which relates the previous coded partition with the current partition tree. Finer partitions than the projected one are defined segmenting the projected partition using texture criteria, while coarser partitions are obtained merging regions with motion criteria. Morphological tools are used both in the projection and the re-segmentation steps.     

Copolymer hydrogel microspheres consisting of modified sulfate chondroitin‐co‐poly(N‐isopropylacrylamide)

Modified chondroitin sulfate (π‐CdS) microspheres were synthesized by way of crosslinking‐copolymerization reaction with N‐isopropylacrylamide (NIPAAm), yielding CdS‐co‐PNIPAAm copolymer network. The incorporation of vinyl groups onto the CdS was processed with the use of glycidyl methacrylate (GMA) in an aqueous solution of pH 3.5 under stirring speed of 800 rpm at 50°C. ¹³C NMR and ¹H NMR spectra of CdS treated with the GMA indicated the formation of 3‐methacryloyl‐1‐glyceryl ester of π‐CdS and 3‐methacryloyl‐2‐glyceryl ester of π‐CdS that are the reaction products resultant of an epoxide ring‐opening mechanism via. The synthesis of microspheres was performed via radical reaction of the vinyl groups at the π‐CdS with vinyl groups at the NIPAAm in a water−benzyl alcohol microemulsion. The formation of spherical structures is the result of the polymerization‐crosslinking reaction of the π‐CdS with the NIPAAm monomers at the droplets of water, in view that both reactants have hydrophilic characteristics at the temperature at which the reaction was processed. The pure CdS hydrogel microspheres showed a slightly cracked structure with a lower diameter range while the CdS‐co‐PNIPAAm hydrogel microspheres showed a flat and tight structure with a more regular mass distribution. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Influence of ultra-high pressure homogenisation on antioxidant capacity,polyphenol and vitamin content of clear apple juice

Ultra-high pressure homogenisation (UHPH) is a recently developed technology and is still under study to evaluate its effect on different aspects of its application to food products. The aim of this research work was to evaluate the effect of UHPH treatments on quality characteristics of apple juice such as antioxidant capacity, polyphenol composition, vitamin C and provitamin A contents, in comparison with raw (R) and pasteurised (PA) apple juice. Several UHPH treatments that include combinations of pressure (100, 200 and 300 MPa) and inlet temperatures (4 and 20 °C) were assayed. Apple juice was pasteurised at 90 °C for 4 min. Antioxidant capacity was analysed using the oxygen radical antioxidant capacity (ORAC), 2,2-diphenyl-1-picrylhydrazyl (DPPH), trolox equivalent antioxidant capacity (TEAC), ferric reducing antioxidant power (FRAP) assay while total phenolic content was determined by the Folin–Ciocalteau assay. According to the FRAP and DPPH assays, UHPH processing did not change apple juice antioxidant capacity. However, significant differences were detected between samples analysed by TEAC and ORAC assays. In spite of these differences, high correlation values were found between the four antioxidant capacity assays, and also with total polyphenol content. The analysis and quantification of individual phenols by HPLC/DAD analytical technique reflects that UHPH-treatment prevented degradation of these compounds. Vitamin C concentrations did not change in UHPH treated samples, retaining the same value as in raw juice. However, significant losses were observed for provitamin A content, but lower than in PA samples.     

Impact of nitrogen oxides (NO,NO2, N2O) on the formation of soot

The emission of both nitrogen oxides and soot from combustion processes is still a matter of concern. When a flue gas recirculation (FGR) technique is applied, the presence of a given nitrogen oxide in the recirculated mixture can affect the emissions of other pollutants, such as soot, and be used for its control in a combustion process. In this context, the present work is focused on the identification of the effect of the main nitrogen oxides (NO, NO₂ and N₂O) present in combustion systems on soot and main product gases formation from the pyrolysis of ethylene, at atmospheric pressure and in the 975–1475 K temperature range. The experimental results are examined to assess the effectiveness of each nitrogen oxide in suppressing or boosting soot formation, to achieve the possible nitrogen oxides reduction, and to identify the elementary steps involved in the nitrogen oxides and ethylene conversion as function of the different nitrogen oxides. This analysis is supported on model calculations.     

Present status of the Liquid Breeder Validation Module for IFMIF

One of the objectives of IFMIF (International Fusion Materials Irradiation Facility), as stated in its specifications, is the validation of breeder blanket concepts for DEMO design. The so-called Liquid Breeder Validation Module (LBVM) will be used in IFMIF to perform experiments under irradiation on functional materials related to liquid breeder concepts for future fusion reactors. This module, not considered in previous IFMIF design phases, is currently under design by CIEMAT in the framework of the IFMIF/EVEDA project.In this paper, the present status of the design of the LBVM is presented.