30 Jahre EXACT-Bauelementesystem

Ohne Zusammenfassung     

Formation of titanium and cobalt germanides on Si (100) using rapid thermal processing

Titanium and cobalt germanides have been formed on Si (100) substrates using rapid thermal processing. Germanium was deposited by rapid thermal chemical vapor deposition prior to metal evaporation. Solid phase reactions were then performed using rapid thermal annealing in either Ar or N₂ ambients. Germanide formation has been found to occur in a manner similar to the formation of corresponding silicides. The sheet resistance was found to be dependent on annealing ambient (Ar or N₂) for titanium germanide formation, but not for cobalt germanide formation. The resistivities of titanium and cobalt germanides were found to be 20 μΩ-cm and 35.3μΩ-cm, corresponding to TiGe₂ and Co₂Ge, respectively. During solid phase reactions of Ti with Ge, we have found that the Ti₆Ge₅ phase forms prior to TiGe₂. The TiGe₂ phase was found to form approximately at 800° C. Cobalt germanide formation was found to occur at relatively low temperatures (425° C); however, the stability of the material is poor at elevated temperatures.     

CVD-based tungsten carbide schottky contacts to 6H-SiC for very high-temperature operation

In this study, tungsten carbide, with its hardness, chemical inertness, thermal stability and low resistivity (25 μΩ cm)¹ is shown as a reliable contact material to n- and p-type 6H-SiC for very high temperature applications. WC films with thicknesses of 100–150 nm were deposited by chemical vapor deposition (CVD) from a WF₆/C₃H₈/H₂ mixture at 1173 K. A method to pattern CVD-tungsten carbide is suggested. TEM analysis of as deposited samples displayed a clear and unreacted interface. The electrical investigations of the p-type 6H-SiC Schottky contacts revealed a high rectification ratio and a low reverse current density (6.1 × 10⁻⁵ A cm⁻², −10 V) up to 773 K. On n-type, a low barrier (Φ_Bn=0.79 eV) at room temperature was observed. The low Φ_Bn value suggests WC to be promising as an ohmic contact material on highly doped n-type epi-layers. We will show a temperature dependence for the barrier height of tungsten carbide contacts that can be related to the simultaneous change in the energy bandgap, which should be considered when designing SiC devices intended for high temperature operation.     

An Effective Approach for High‐Efficiency Photoelectrochemical Solar Cells by Using Bifunctional DNA Molecules Modified Photoanode

This paper firstly reports the effect of deoxyribonucleic acid (DNA) molecules extracted from chickpea and wheat plants on the injection/recombination of photogenerated electrons and sensitizing ability of dye‐sensitized solar cells (DSSCs). These high‐yield DNA molecules are applied as both linker bridging unit as well as thin tunneling barrier (TTB) at titanium dioxide (TiO₂ )/dye interface, to build up high‐efficient DSSCs. With its favorable energy levels, effective linker bridging role, and double helix structure, bifunctional DNA modifier shows an efficient electron injection, suppressed charge recombination, longer electron lifetime, and higher light harvesting efficiency, which leads to higher photovoltaic performance. In particular, a photoconversion efficiency (PCE) of 9.23% is achieved by the binary chickpea and wheat DNA‐modified TiO₂ (CW@TiO₂) photoanode. Furthermore, time‐resolved fluorescence spectroscopy measurements confirm a better electron transfer kinetics for DNA‐modified TiO₂ photoanodes, implying a higher electron transfer rate (k_ET). This work highlights a great contribution for the photoanodes that are linked with DNA molecule, which act as both bridging unit and TTB to control the charge recombination and injection dynamics, and hence, boost the photovoltaic performance in the DSSCs.     

Influence of dry and wet cleaning on the properties of rapid thermal grown and deposited gate dielectrics

Various silicon surface cleaning processes for rapid thermal in-situ polysilicon/ oxide/silicon stacked gate structures have been evaluated. Metal-oxide-semiconductor capacitors were fabricated to assess the effects of cleaning on the quality of gate oxide structures produced by both rapid thermal oxidation (RTO) and rapid thermal chemical vapor deposition (RTCVD). Excellent electrical properties have been achieved for both RTO and RTCVD gate oxides formed on silicon wafers using either an ultraviole/zone (UV/O₃) treatment or a modified RCA clean. On the contrary, poor electrical properties have been observed for RTO and RTCVD gate oxides formed on silicon wafers using a high temperature bake in Ar, H₂, or high vacuum ambient. It has also been found that the electrical properties of the RTCVD gate oxides exhibit less dependence upon cleaning conditions than those of RTO gate oxides. This work demonstrates that initial surface condition prior to gate oxide formation plays an important role in determining the quality of RTO and RTCVD gate oxides.     

A theoretical study on hydrodynamics of condensate films over fluted tubes

Hydrodynamic characteristics of liquid films in downward motion on the outer surface of fluted tubes have been investigated theoretically. Velocity distribution, volumetric flow rate and friction factor are calculated from the solution of the equation of motion using bi-polar coordinate system.The results provide sufficient information pertaining to the thickness of the condensate film and its variation, thus enabling the prediction of heat transfer coefficients in desalination.     

Synthesis,characterization, and study of thermal properties of methyl-substituted arylene sulfone ether polyimides,polyamides, and poly(amide–imides)

A number of methyl-substituted bis[(phenyleneoxy) sulfone] dianilines were synthesized and reacted with pyromellitic dianhydride (PMDA), benzophenone tetracarboxylic acid dianhydride (BTDA), terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), and trimellitic anhydride acid chloride (TMAC) to prepare a series of polyimides, polyamides, and poly(amide–imides), respectively. Low temperature solution and interfacial polymerization techniques were utilized to prepare the above polymers. Most of the polymers prepared formed tough, transparent flexible films. The prepared polymers were characterized by solution viscosity, thermal gravimetric analysis (dynamic and isothermal), and differential scanning calorimetry. The effect of the number and the ring substitution of methyl groups on polymer properties is discussed.     

A novel antioxidant source: evaluation of in vitro bioaccessibility,antioxidant activity and polyphenol profile of phenolic extract from black radish peel wastes (Raphanus sativus L. var. niger) during simulated gastrointestinal digestion

The aim of this study was to evaluate the potency of polyphenolic extract from black radish (Raphanus sativus L. var. niger) root peel waste (PEBRRP) as an antioxidant food additive. PEBRRP was found a powerful antioxidant extract, in which had 172.9 ± 11.5, 462.72 ± 3.05, and 796.51 ± 10.4 mg TE per g dw of total antioxidant capacity (TAC) by CUPRAC, DPPH, and FRAP assays, respectively. The total phenolic content (TPC) and total flavonoid content (TFC) of PEBRRP were found as 305.51 ± 5.2 mg GAE per g dw and 171.58 ± 6.2 mg CAE per g dw, respectively. The ferulic acid (28.02 ± 4.5 mg per g dw) and epicatechin (19.82 ± 3.6 mg per g dw) were identified as the main polyphenols in undigested PEBRRP. The bioaccessibility of total phenolic and total flavonoid compounds of PEBRRP was found approximately 5%, and the antioxidant capacity of bioaccessible PEBRPP fraction was determined 6% in CUPRAC, 36% in DPPH and 47% in FRAP methods.