Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.     

Synthesis of N‐polyethereal polypyrroles and their application for the preconcentration of rare earth ions

Conducting polymers containing polyether pseudocages (P I , P II , P III ) have been synthesized via chemical oxidation of 1,5‐bis(1,1‐pyrrole)‐3‐oxabutane (M I ), 1,8‐bis(1,1‐pyrrole)‐3,6‐dioxahexane (M II ), and 1,11‐bis(1,1‐pyrrole)‐3,6,9‐trioxaundecane (M III ) using anhydrous FeCl₃ in CHCl₃. Because as obtained polymer resins did not give any response toward any cations, they were reduced (undoped) using chemical reducing agents. Tetrabutylammonium hydroxide was found to be more effective in undoping to obtain more reproducible and reusable polymer resins. The undoped polymer resins were tried in the extraction of rare earth metal ions from the aqueous medium. Among them, only P III resin removes La(III), Eu(III) and Yb(III) and can be employed for the preconcentration of these metal ions. For batch extraction of La(III), Eu(III) and Yb(III) at neutral pH values, percent recoveries of 98.0 ± 1.0, 90.7 ± 1.4, 87.3 ± 4.0, respectively, has been obtained. The sorption capacity is found as 1.3 mg of La(III) per gram of P III resin. The P III resin could be reused at least five times without significant change in its sorption capacity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Biosynthesis of the Myxobacterial Antibiotic Corallopyronin A

Corallopyronin A is a myxobacterial compound with potent antibacterial activity. Feeding experiments with labelled precursors resulted in the deduction of all biosynthetic building blocks for corallopyronin A and revealed an unusual feature of this metabolite: its biosynthesis from two chains, one solely PKS‐derived and the other NRPS/PKS‐derived. The starter molecule is believed to be carbonic acid or its monomethyl ester. The putative corallopyronin A biosynthetic gene cluster is a trans‐AT‐type mixed PKS/NRPS gene cluster, containing a β‐branching cassette. Striking features of this gene cluster are a NRPS‐like adenylation domain that is part of a PKS‐type module and is believed to be responsible for glycine incorporation, as well as split modules with individual domains occurring on different genes. It is suggested that CorB is a trans‐acting ketosynthase and it is proposed that it catalyses the Claisen condensation responsible for the interconnection of the two chains. Additionally, the stereochemistry of corallopyronin A was deduced by a combination of a modified Mosher's method and ozonolysis with subsequent chiral GC analyses.     

Redox Control in Solvent Extraction Studies Using a PEEK AKUFVE Unit

Abstract

When studying actinides or other elements with different possible oxidation states it is important to control which state is present in solution. Earlier redox control has been done by adding some other element to the solution but this approach introduces additional uncertainties. Since the sixties the AKUFVE apparatus has been used for precise solvent extraction studies. Now this equipment has been improved with redox control facilities, additional thermal control, and all parts in contact with the liquids are made of polyetherether ketone (PEEK) to minimize sorption.     

Effects of Nanoparticles on Film Properties of Waterborne Acrylic Emulsions

Waterborne acrylic emulsion was obtained by using methyl methacrylate, ethyl and butyl acrylate monomers. Emulsions containing nanoparticles were prepared by blending the stable dispersions containing SiO₂ or MMT nanoparticles. The films were prepared from emulsions and coating tests were applied. The physical properties of prepared emulsions are better than the commercial emulsions. The addition of the nanoparticles especially SiO₂ have positive effect on the resistance to environmental conditions of emulsions. Waterborne acrylic emulsions containing nanoparticles prepared in this study can be used in the manufacturing of the semi-lustrous emulsion type nano paint with low cost, high performance and environmentally friendly.     

Polymeric absorbent for water sorption based on chemically crosslinked poly (acrylamide/2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt) hydrogels

Summary Swelling equilibrium of polyelectrolyte copolymer gels containing of acrylamide (AAm) and 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPS) have been studied as a function of copolymer composition. AAm/AMPS hydrogels were prepared by free radical solution polymerization in aqueous solution of AAm with AMPS as anionic comonomer and two multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA) and trimethylolpropane triacrylate (TMPTA). Swelling experiments were performed in water at 25 °C, gravimetrically. The influence of AMPS content in hydrogels was examined. Swelling of AAm/AMPS hydrogels was increased up to 1018% (for containing 2% AMPS and crosslinked by EGDMA) 15246% (for containing 8% AMPS and crosslinked by TMPTA), while AAm hydrogels swelled up to 804% (crosslinked by TMPTA)–770% (crosslinked by EGDMA). The values of equilibrium water content of the hydrogels are 0.8851–0.9935. Diffusion behavior was investigated. Water diffusion into hydrogels was found to be non-Fickian in character.     

Phenylalanine Ammonia‐Lyase‐Catalyzed Deamination of an Acyclic Amino Acid: Enzyme Mechanistic Studies Aided by a Novel Microreactor Filled with Magnetic Nanoparticles

Phenylalanine ammonia‐lyase (PAL), found in many organisms, catalyzes the deamination of l ‐phenylalanine (Phe) to (E)‐cinnamate by the aid of its MIO prosthetic group. By using PAL immobilized on magnetic nanoparticles and fixed in a microfluidic reactor with an in‐line UV detector, we demonstrated that PAL can catalyze ammonia elimination from the acyclic propargylglycine (PG) to yield (E)‐pent‐2‐ene‐4‐ynoate. This highlights new opportunities to extend MIO enzymes towards acyclic substrates. As PG is acyclic, its deamination cannot involve a Friedel–Crafts‐type attack at an aromatic ring. The reversibility of the PAL reaction, demonstrated by the ammonia addition to (E)‐pent‐2‐ene‐4‐ynoate yielding enantiopure l ‐PG, contradicts the proposed highly exothermic single‐step mechanism. Computations with the QM/MM models of the N‐MIO intermediates from l ‐PG and l ‐Phe in PAL show similar arrangements within the active site, thus supporting a mechanism via the N‐MIO intermediate.     

Novel Amide-Based Cationic Surfactants as Efficient Corrosion Inhibitors for Carbon Steel in HCl and H2SO4 media

A variety of surface active compounds were synthesized by the quaternization of some straight chain amide derivatives with triethylamine or pyridine. Their structure FT-IR and ¹H-NMR spectra were recorded. In addition their physical properties and corrosion prevention efficiencies were investigated. All compounds were tested with steel coupons in acidic media by the gravimetric method. As acidic media 1.5 M HCl and 1.5 M H₂SO₄ were used and the corrosion inhibition tests fulfilled at room temperature for 24 h. Almost all prepared cationic surfactants showed efficient inhibition around their critical micelle concentrations. The effects of HCl concentration on corrosion inhibition of some synthesized compounds were also investigated. The corrosion tests were supported by contact angle measurements.     

Nucleotide degradation products of gamma‐irradiated sea bream (Sparus aurata) stored in ice

Nucleotide degradation products of irradiated sea bream stored up to 19 days in ice were investigated. Irradiation had significant effect on the nucleotide concentrations in sea bream muscle (P < 0.05). The results showed that the highest value of inosine monophosphate (IMP) was observed in irradiated sea bream at 5 kGy, followed by at 2.5 kGy. Initial inosine (INO) concentration in irradiated sea bream at 5 kGy was 4.26 μmoles g^?1, which reached maximum value of 8.83 μmoles g^?1 when fish completely spoiled (19 days). When the fish reached the limit of acceptability, the mean values of K, Ki, H and G were 86.8%, 90.3%, 59.8% and 213.9% for unirradiated sea bream, 85.2%, 87.8%, 56.8% and 197.8% for irradiated sea bream at 2.5 kGy and 88.4%, 90.9%, 57.8%, 211.5% for irradiated sea bream at 5 kGy, respectively. The results of this study indicated that nucleotide degradation was more rapid in unirradiated sea bream than those irradiated. K, Ki, H and G value in irradiated fish can be used as a freshness index because there is a good linear relationship between values and storage time of fish.