Separation of H(2)SO(4) + CuSO(4) mixture by diffusion dialysis

Diffusion dialysis of aqueous solution of H(2)SO(4) + CuSO(4) has been investigated in a two-compartment cell with an anion-exchange membrane Neosepta-AFN. The experiments have proved that sulfuric acid permeates well through the membrane used, while cupric sulfate is efficiently rejected. This operation is very effective at high acid concentrations and low concentrations of cupric sulfate. Furthermore, it has been found that even at the highest concentration of CuSO(4), the rejection coefficient is higher than 0.965. The flux of CuSO(4) calculated from the time dependences of the CuSO(4) concentration is negatively influenced by increasing acid concentration.     

A study on the crystallization of amorphous arsenic

The results of DTA analysis of amorphous arsenic in combination with electron microscopical study of the samples through the whole temperature range reveal that no changes of the initial state of the sample occur on heating up to crystallization temperature. Close above this temperature the spontaneous crystallization starts. It differs markedly from the case of glassy materials, like As₂Te₃, in which case at temperatures as low as the transition region T_g the crystallization nuclei of geometrically defined shapes appear and grow into crystalline grains on further heating.     

Assessment of the mean-value of 17-hydroxypregnenolone in the umbilical blood of newborns by the exploratory analysis of biochemical data

The main aim of data analysis in biochemical metrology is the extraction of relevant information from biochemical data measurements. A system of extended exploratory data analysis (EDA) based on the concept of graphical tools for sample data summarization and exploration is proposed and the original EDA algorithm in S-Plus is available on the Internet at http://www.trilobyte.cz/EDA. To check basic assumptions about biochemical and medical data is to examine the independence of sample elements, sample normality and homogeneity. The exact assessment of the mean-value and the variance of steroid levels in controls is necessary for the correct assessment of the samples from patients. Data examination procedures are illustrated by a determination of the mean-value of 17-hydroxypregnenolone in the umbilical blood of newborns. For an asymmetric, strongly skewed sample distribution corrupted with outliers the best estimate of location seems to be the median. The Box–Cox transformation improves a sample symmetry. The proposed procedure gives reliable estimates of a mean-value for an asymmetric distribution of 17-hydroxypregnenolone when the arithmetic mean can not be used.     

Biodegradability of ethylenediamine-based complexing agents

Biological degradability of ethylenediamine derivatives depends on the type and number of substituents. The susceptibility to biodegradation decreases in the sequence of substituents -COCH3, -CH3, -C2H5, -CH2CH2OH, -CH2COOH and with polysubstitution. The biodegradability depends also on the kind and number of nitrogen atoms. Complexing agents with a single-nitrogen atom in the molecule (e.g. NTA) succumb relatively readily to biodegradation whereas, compounds with two or more tertiary amino groups are biologically highly stable and do not undergo biodegradation even in experiments with activated sludge adapted at an age of up to 30 days (EDTA, DTPA, PDTA, HEDTA). A lowering of the degree of substitution brings about an increased susceptibility to biodegradation. This holds, e.g., for replacement of tertiary amino groups with secondary ones; thus the symmetrically disubstituted ethylenediamine-N,N'-diacetic acid (EDDA) possesses still sufficient complexing ability while belonging already to the group of potentially degradable substances.     

Ternary Copper(II) Complexes in Solution Formed With 8-Aza Derivatives of the Antiviral Nucleotide Analogue 9-[2-(Phosphonomethoxy)Ethyl]Adenine (PMEA)

The stability constants of the mixed-ligand complexes formed between Cu(Arm)(2+), where Arm= 2,2'-bipyridine (Bpy) or 1,10-phenanthroline (Phen), and the dianions of 9-[2-(phosphonomethoxy)ethyl]-8-azaadenine (9,8aPMEA) and 8-[2-(phosphonomethoxy)ethyl]-8-azaadenine (8,8aPMEA) (both also abbreviated as PA(2-)) were determined by potentiometric pH titrations in aqueous solution (25 ( degrees )C; I = 0.1 M, NaNO(3)). All four ternary Cu(Arm)(PA) complexes are considerably more stable than corresponding Cu(Arm)(R-PO(3)) species, where R-PO(3) (2-) represents a phosph(on)ate ligand with a group R that is unable to participate in any kind of interaction within the complexes. The increased stability is attributed to intramolecular stack formation in the Cu(Arm)(PA) complexes and also to the formation of 5-membered chelates involving the ether oxygen present in the -CH(2)-O-CH(2)-PO(3) (2-) residue of the azaPMEAs. A quantitative analysis of the intramolecular equilibria involving three structurally different Cu(Arm)(PA) species is carried out. For example, about 5% of the Cu(Bpy)(8,8aPMEA) system exist with the metal ion solely coordinated to the phosphonate group, 14% as a 5-membered chelate involving the -CH(2)-O-CH(2)-PO(3) (2-)residue, and 81% with an intramolecular stack between the 8-azapurine moiety and the aromatic rings of Bpy. The results for the other systems are similar though with Phen a formation degree of about 90% for the intramolecular stack is reached. The existence of the stacked species is also proven by spectrophotometric measurements. In addition, the Cu(Arm)(PA) complexes may be protonated, leading to Cu(Arm)(H;PA)(+) species for which it is concluded that the proton is located at the phosphonate group and that the complexes are mainly formed by a stacking adduct between Cu(Arm)(2+) and H(PA)(-). Conclusions regarding the biological properties of these azaPMEAs are shortly indicated.     

Thermal-induced evolution of secondary phases in Cr–Mo–V low alloy steels

Four low alloy steels with different contents of molybdenum and vanadium were investigated. The steels were annealed at 773, 793, 853, 873, 933, 973, and 993 K for 500, 1000, 3000, and 10000 h. Techniques of transmission electron microscopy and thermodynamic calculations (ThermoCalc) were used to characterise influence of the steel bulk composition and the annealing conditions on evolution of carbides M₃C, M₂C, M₇C₃, M₂₃C₆, M₆C, and MC (M=metallic element). Changes in structure types and metal compositions of the carbides were characterised in detail. The work was done with the intention to obtain more information about the secondary phase evolution in low alloy steels used in energy industries.     

Continuous Separation of an H2SO4/CuSO4 Mixture by Diffusion Dialysis

The separation of a mixture of sulfuric acid and copper sulfate is experimentally investigated in a two‐compartment countercurrent dialyzer at steady state using an anion‐exchange membrane. The dialysis process is characterized by the recovery yield of acid, the rejection coefficient of salt, and the permeability coefficient of the membrane. The simultaneous transport of sulfuric acid and copper sulfate is quantified by four phenomenological coefficients, which are dependent on the acid and salt concentrations in the feed. They are determined by a procedure consisting of (i) the numerical integration of the basic differential equations describing the concentration profiles of both components on both sides of the membrane and (ii) the optimizing method.     

Utilization of Lactobacillus sp. for steroid glycoalkaloids degradation by lactic acid fermentation

The degradation fo steroid glycoalkaloids (SGAs) has been studied in model solutions. The number of colony forming units (CFU) was determined using a nondirect (cultivation) method during all stages of fermentation. The changes in SGAs content were observed by HPLC on the Supelcosil LC-NH2 column. The changes in alpha-tomatine concentration added to fermented Lactobacillus MRS broth have been studied. A mathematical model of steroid glycoalkaloids degradation during lactic fermentation was proposed. The mathematical model was based on the experimental data of SGA and glucose concentration and should be used for study and prediction of SGA concentration changes of fermented samples. The ratio of SGA degradation rate by fermentation and by lactic acid hydrolysis was calculated. The experimental data evaluated by proposed mathematical model for the selected strain of Lactobacillus plantarum 976H show real feasibility for SGA degradation by lactic acid fermentation.     

Polymeric Hollow‐Fiber Bundles as Immersed Heat Exchangers

Plastic immersed heat exchangers are used in various applications where chemically neutral and noncorrosive equipment is required. Their potential competitors, namely, polymeric hollow‐fiber bundles, were investigated. Three different fiber bundles were tested as immersed coolers of a hot reservoir. Two types of polypropylene hollow fibers with various outside diameters were employed. Fibers were twisted with different curvature to achieve better distribution and improve natural convection on their outer surface. Calculation by experimental results was compared with the equation for natural convection across the horizontal cylinder, which overestimates heat transfer coefficients and can be applied for only rough estimation. Experimentally achieved pressure drops agreed well with theoretical prediction for laminar flow.