A new procedure for treatment of oily slurry using geotextile filters

A new procedure to mitigate the environmental impacts and reduce the cost of disposal of oil slurry is present in this paper. Waste from the petroleum industry has a high environmental impact. Systems for oil–water separation have been used to mitigate the contamination potential of these types of effluents. At the outlet of these systems, the oil is skimmed-off the surface, while the slurry is removed from the base. Due to the high concentration of contaminants, the disposal of this slurry is an environmentally hazardous practice. Usually this type of waste is disposed of in tanks or landfills after removal from the industrial plant. Basically, the proposed procedure utilizes drying beds with geotextile filters to both reduce the water content in the slurry and obtain a less contaminated effluent. Laboratory tests were carried out to simulate the drying system. Four types of filters were analyzed: two non-woven geotextiles, one woven geotextile, and a sand filter.     

Continuous mandibular distraction osteogenesis using superelastic shape memory alloy (SMA)

Distraction osteogenesis is a well-established method of endogenous tissue engineering. It is a biological process of bone neo-formation between segments subjected to tension. The concept of this study was to investigate the distraction osteogenesis with a device capable of creating a permanent and constant force during the whole process as if a very large number of small elongations were applied constantly. The mechanical testing of the device used to produce the constant force and the in vivo analysis of the bone growth after it was implanted in rabbits are presented on this work. The device consists of a NiTi coil spring, superelastic at body temperature, in order to have a stress plateau during the austenitic retransformation during the unloading. The in vivo analysis was made on six female rabbits of 12 months old. A segmental mandibulectomy at the horizontal arm of the mandible and a corticotomy at 5mm distant from the gap were made. Next, following a latency period of five days, the SMA springs were implanted to induce the bone neo-formation. The displacement at the unloading plateau shows that it is necessary to have longer springs or to use several (available commercially) in series in order to fulfil the requirements of a human distraction. The temperature variations induced changes in the spring force. However, when the temperature returns to 37 degrees C the distraction force recovers near the initial level and does so completely when the distraction process continues. For the in vivo study, all six rabbits successfully completed the distraction. The radiographies showed the gap as distraction advanced. A continuity in the newly formed bone with similar transversal and horizontal dimensions than the original bone can be observed on the histologies. In conclusion, the application of a constant force on distraction osteogenesis, using SMA springs, may be a successful alternative to the conventional gradual distraction.     

Towards cooperative frameworks for modeling and integrating biological processes knowledge

Data organization has become a strategic target for biologists due to the increasing volume of genomic data available for them. For this purpose, we need a complete knowledge model for representing biological system. In this paper, we deal with both processes for the creation and integration of shareable, reusable domain models within biology, which is a critical issue. In particular, this work introduces a new cooperative development approach for biology ontologies. This approach is based on the integration of the ontologies supplied by different human experts. Two experiments in biological domains are presented and their results discussed.     

Monitoring of bacterial contamination in food samples using capillary zone electrophoresis

A capillary electrophoresis method with UV detection is proposed for the identification and quantitation of bacterial contamination in food samples. The electrophoretic separation relies on the differential mobility of bacteria in the capillary. Electrophoretic resolution is improved by using calcium and myoinositol hexakisphosphate as specific ions that interact with the bacterial surface changing its electrical properties and electrophoretic mobility. The proposed method allows the effective separation of eight different types of bacteria in only 25 min. It was successfully used to detect the presence of bacteria in contaminated food. The precision of the analysis of real spiked samples ranges from 3.3 to 7.0%, and the overall analysis time is 7 h, which is much shorter than the 24-48 h typically required for plate counts. The validity of the method was established by comparison with the standard plate counting method.     

Second-order advantage achieved with four-way fluorescence excitation-emission-kinetic data processed by parallel factor analysis and trilinear least-squares. Determination of methotrexate and leucovorin in human urine

Four-way fluorescence data recorded by following the kinetic evolution of excitation-emission fluorescence matrices (EEMs) have been analyzed by parallel factor analysis and trilinear least-squares algorithms. These methodologies exploit the second-order advantage of the studied data, allowing analyte concentrations to be estimated even in the presence of an uncalibrated fluorescent background. They were applied to the simultaneous determination of the components of the anticancer combination of methotrexate and leucovorin in human urine samples. Both analytes were converted into highly fluorescent compounds by oxidation with potassium permanganate, and the kinetics of the reaction was continuously monitored by recording full EEM of the samples at different reaction times. A commercial fast scanning spectrofluorometer has been used for the first time to measure the four-way EEM kinetic data. The rapid scanning instrument allows the acquisition of a complete EEM in 12 s at a wavelength scanning speed of 24 000 nm/min. The emission spectra were recorded from 335 to 490 nm at 5-nm intervals, exciting from 255 to 315 nm at 6-nm intervals. Ten successive EEMs were measured at 72-s intervals, to follow the fluorescence kinetic evolution of the mixture components. Good recoveries were obtained in synthetic binary samples and also in spiked urine samples. The excitation, emission, and kinetic time profiles recovered by both chemometric techniques are in good agreement with experimental observations.     

Enzymatic genosensor on streptavidin-modified screen-printed carbon electrodes

Voltammetric enzyme genosensors on streptavidin-modified screen-printed carbon electrodes (SPCEs) for the detection of virulence nucleic acid determinants of pneumolysin and autolysin genes, exclusively present on the genome of the human pathogen Streptococcus pneumoniae, were described. Alkaline phosphatase (AP) and 3-indoxyl phosphate were used as the enzymatic label and substrate, respectively. The oligonucleotide probes were immobilized on electrochemically pretreated SPCEs through the streptavidin/biotin reaction. The adsorption of streptavidin was performed by deposition of a drop of a streptavidin solution overnight at 4 degrees C on the surface of the SPCEs. After the hybridization reaction with FITC-labeled complementary targets, the enzyme is captured using an anti-FITC antibody conjugated to AP. In nonstringent experimental conditions, these genosensors can detect 0.49 fmol of 20-mer oligonucleotide target and discriminate between a complementary oligo and an oligo with a three-base mismatch. In the presence of 25% formamide in the hybridization buffer, a single-base mismatch on the oligonucleotide target can be detected.     

Real-time monitoring of high-temperature corrosion in stainless steels by open-path laser-induced plasma spectrometry

Open-path laser-induced plasma spectrometry (OP-LIPS) represents an appealing alternative for the real-time monitoring of high-temperature processes due to its inherent non-invasive and remote capabilities. In this work, stainless steel samples have been analyzed at 10 meters from the laser source. The effect of the high-temperature conditions to the protective anti-corrosion layer have been analyzed, as well as additional factors such as the type of steel and the exposure time. The number of pulses required to ablate the alteration layer has been found to follow a linear relationship with the square root of the exposure time, in excellent agreement with the off-line thermogravimetric measurements described in the literature.     

Identification and Quantitation of Allelochemicals from the Lichen Lethariella canariensis: Phytotoxicity and Antioxidative Activity

Phytotoxicity-based extraction and fractionation were employed to separate allelochemicals contained in an extract of Lethariella canariensis. Twelve phenolic substances were isolated from the phytotoxic fraction Letharal of the thalli. These were identified by spectroscopic methods, physicochemical constants, and HPLC chemical correlation, and determined to be atranol (2), chloroatranol (3), hematommic acid (4), chlorohematommic acid (5), methyl hematommate (6), methyl chlorohematommate (7) (new compound), ethyl hematommate (8), ethyl chlorohematommate (9), methyl -orsellinate (10), atranorin (11), chloroatranorin (12), and (+)-usnic acid (13). Further identification and quantification of these allelochemicals in the environment were conducted by HPLC. Several phenolic compounds showed moderate antimicrobial activity. The cytostatic activity of the polyphenols was investigated on U937 and HL-60 cells. All compounds were assayed, with the exception of 10. The Letharal mixture decreased cell viability in both cell lines. Protection against lipid peroxidation was investigated using brain homogenates. Compounds 2, 3, 6, 8, 11, and Letharal decreased H₂O₂/Fe⁺² induced lipid peroxidation in a concentration-dependent manner, while 10 and 13 were unable to protect tissue against oxidative stress.     

Structural characterization of chromosome I size variants from a natural yeast strain

Many yeast strains isolated from the wild show karyotype instability during vegetative growth, with rearrangement rates of up to 10(-2) chromosomal changes per generation. Physical isolation and analysis of several chromosome I size variants of one of these strains revealed that they differed only in their subtelomeric regions, leaving the central 150 Kb unaltered. Fine mapping of these subtelomeric variable regions revealed gross alterations of two very similar loci, FLO1 and FLO9. These loci are located on the right and left arms, respectively, of chromosome I and encompass internal repetitive DNA sequences. Furthermore, some chromosome I variants lacking the FLO1 locus showed evidence of recombination at a DNA region on their right arm that is enriched in repeated sequences, including Ty LTRs. We propose that repetitive sequences in many subtelomeric regions in S. cerevisiae play a key role in karyotype hypervariability. As these regions encode several membrane-associated proteins, subtelomeric plasticity may allow rapid adaptive changes of the yeast strain to specific substrates. This pattern of semi-conservative chromosomal rearrangement may have profound implications, both in terms of evolution of wild strains and for biotechnological processes.