社区环境管理取得成果的要素:美国酸性矿物废水治理的经验教训

1980年代,社区环境管理(CBEM:community-based environmental management)作为处理棘手环境问题的创新途径在美国开始出现.CBEM指的是地方团体采用与各类代理机构、地方政府或其他组织以合作方式处理环境问题.为更好地理解这一流行的环境管理手段,本文首先回顾环境管理制度的演变以及影响CBEM过程的资源变化,在此基础上,本文建构了关于CBEM过程的评估框架,并列举了两个通过发起CBEM来治理酸性矿物废水对流域污染的案例.     

Observations on the changes in nitrate concentrations along streams in seven upland moorland catchments in Northeast Scotland

River water has been sampled under baseflow conditions in both summer and winter at c. 250-m intervals along the length of each of seven rivers in northeast Scotland, and the nitrate contents have been determined. The resultant data have been examined in the context of the nitrogen saturation hypothesis. Capacity of the catchment soils to retain nitrate was generally minimal in winter. Although biological uptake of nitrate was evident in summer, in the upper part of each catchment substantial nitrate leaching still occurred. The phenomenon was most marked in water draining from hill peats, except where these were conspicuously waterlogged. The results are discussed in the context of possible nitrogen saturation effects on upper catchment slopes.     

Protocatechuic acid ozonation in aqueous solutions

The oxidation of protocatechuic acid with ozone in aqueous solution has been studied varying the temperature, pH, ozone partial pressure and initial acid concentration. A stoichiometric ratio of 2 mol of ozone consumed per mol of protocatechuic acid reacted is deduced from homogeneous experiments in a discontinuous tank reactor.In the ozonation experiments, the influence of the operating variables was established and the kinetic regime of ozone absorption was shown to be fast and pseudo m-order with respect to ozone, except at pH 2, when the reaction develops in the moderate kinetic regime. After applying a mass transfer with chemical reaction model, the reaction orders are deduced and the kinetic rate constants are determined as a function of pH and temperature. A modified Arrhenius expression is proposed to correlate them.     

Geomechanical model simulation for the varied rock formations of the Kadana dam foundation,Gujarat, India

Bulletin of Engineering Geology and the Environment - Precambrian layered rocks consisting of quartzites, phyllites and metagreywackes of the Aravallis having a large variation in thickness,...     

Treatment capability of a physical—Chemical package plant

A short-term study of a commercially-available physical—chemical waste treatment plant is reported. Results indicate that an excellent quality of effluent can be consistently obtained despite wide fluctuations of influent wastewater characteristics. Physical, chemical, and biological parameters were monitored. The short-term data obtained offer some evidence of superior treatment efficiency in terms of COD, color, turbidity, and phosphorus removals when compared to more conventional treatment methods.     

The uptake of heavy metals by epiphytic bacteria on Alisma plantago-aquatica

Bacterial epiphytes on the surface of the fresh-water plant Alisma plantago-aquatica collected from a polluted river were found to be a major factor in contributing to the total metal concentrations of the plant. The removal of epiphytes from the leaf surface resulted in significant reductions in the concentrations of Cr (reduced by 15–50%), Cu (30–35%), Fe, Pb, and Zn (10–50%). While numbers of epiphytes and concentrations of heavy metals increased in samples collected from polluted water compared with from unpolluted water, the fraction of metals held by the epiphytes appeared to remain similar for all samples.     

Orientation of smoke production in polyacrylonitrile

The introduction of ionic additives, such as KCN, or acidic comonomer units, such as methacrylic acid, which change the nature of the mechanism of nitrile oligomerization reaction from radical to ionic and cause its initiation at lower temperature, allows the level of obscurity and the total amount of smoke production, both in smouldering and flaming conditions to be decreased. An opposite result is obtained if diphenylpicrylhydrayl (DPPH) radicals in polyacrylonitrile is introduced; DPPH retards the initiation of the radical nitrile oligomerization reaction. The acrylonitrile-methacrylic acid copolymers have a limiting oxygen index, which increases with the methacrylic acid content. Owing to the increased amount of NH₃ produced during pyrolysis, the copolymers have a swelling behavior during the combustion test.     

Results of evaluation of the strength of concrete placed in the shafts of cast-in-place piles

Conclusions 1. Application of the method of underwater concreting with the use of a container is inexpedient in connection with the presence of a large number of flaws detected in the shafts of cast-in-place piles formed by this method; concreting of holes by the VAT method is preferable.2. The strength of concrete in the shafts of cast-in-place piles increases, reaching a maximum at a depth of 0.4–0.5 the length of the shaft. Variation in strength along the shaft is explained primarily by the percentage of coarse aggregate contained in the concrete.3. The quality of pile concrete should be monitored during all stages of pile installation, and, primarily during the stage of concreting, i.e., when there is a chance of correcting an observed defect.All-Union Institute for the Design and Planning of Health Resorts. Scientific-Research Institute of Foundations and Underground Structures. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 14–17, September–October, 1976.     

A box beam finite element for the elastic analysis of thin-walled structures

The purpose of this paper is to present a formulation of a curved thin-walled box beam finite element having a variable cross-section with at least one vertical axis of symmetry.

To allow for the effects of warping and distortion, three degrees of freedom have been included in the formulation. These degrees of freedom have been designated as the rate of change of twisting angle, the distortional angle of the cross-section, and the rate of change of distortional angle. The effect of shear lag has also been included.

The element may be used for the elastic analysis of a variety of thin-walled structures and in particular for the preliminary analysis of box bridge decks where a three-dimensional analysis may be unnecessary. The accuracy of the element has been demonstrated by comparison of the results obtained with known results from other methods for some examples.