Lead recovery from aqueous environment by using porous carbon of citrus fruits waste: equilibrium,kinetics and thermodynamic studies

ABSTRACT

The mixture of citrus fruits (orange, grapefruit, mandarin, and lemon) wastes was utilized to obtain high surface area activated carbon (AC) by H₃PO₄ activation. The production conditions were optimized and the optimum conditions were determined. The optimal-activated carbon (CFWAC) was characterized by various physicochemical techniques. CFWAC was also used as a sorbent for Pb (II) ions from water. Batch experiments were performed to explore the adsorption capacity and mechanism. The Langmuir isotherm and pseudo-second-order kinetic model showed good fitness to the experimental data. The maximum Pb (II) adsorption capacity of CFWAC was found to be 163.93 mg/g.     

Effect of Adding Transition Metals to Copper on the Dehydrogenation Reaction of Ethanol

The present work aims to investigate the effect adding Ag, Co, Ni, Cd and Pt to copper on ethanol dehydrogenation. The catalysts synthesized by deposition–precipitation method were characterized using various physicochemical methods such as N₂ adsorption–desorption, TPR, SEM–EDX, XRD, XPS and TGA–DSC-MS. Catalytic evaluation results revealed that the predominant product of the reaction was acetaldehyde. Monometallic copper or mixed with Cd, Ag or Co show good catalytic performances. Adding nickel to copper improves the process conversion but reduces acetaldehyde selectivity, giving rise to methane in produced hydrogen. Pt-Cu/SiO₂ catalyst guides the reaction towards diethyl ether. Time on stream tests performed during 12 h at 260 °C, showed that adding Cd to Cu enhances its stability by over 30% of conversion, this is explained by the reduction of copper crystallites sintering, which makes Cd-Cu/SiO₂ a promising catalyst for the production of acetaldehyde by ethanol dehydrogenation.

Graphic Abstract

     

Varnish layer hardness of oriental beech (fagus orientalist L.) wood as affected by impregnation and bleaching

The impacts of impregnation and bleaching on the varnish layer hardness of Oriental beech (Fagus orientalist L.) wood were investigated. A number of bleaching combinations {[NaOH−H₂O₂], [NaOH−Ca(OH)₂−H₂O₂], [NaOH−MgSO₄−H₂O₂] [NaHSO₃−H₂C₂O₄], [NaSiO₃−H₂O₂], [KMnO₄+NaHSO₃+H₂O₃]} were applied at 18% concentration for bleaching to both impregnated and unimpregnated specimens of Oriental beech wood. Subsequently, water-based (WB) varnish was coated over the samples and the varnish layer hardness values were determined in accordance with ASTM D 4366-95. All of the chemicals used for bleaching reduced the surface hardness. However, after varnish coating, the hardness of most samples was similar to that of the varnish-coated natural (control) samples.     

Study of the polymerization of 1-octadecene with different rnetallocene catalysts

Summary 1-Octadecene (C18) was polymerized by using different metallocene catalysts. The rac-Et(Ind)₂ZrC1₂/MAO (I) and rac-Me₂Si(Ind)₂ZrC1₂/MAO (III) presented the highest activity as compared with ra-Et(2-Me-Ind)₂ZrCl₂/MAO (II) and Ph₂C(Flu)(Cp)ZrC1₂/MAO (IV) catalysts. Catalyst IV produced polymers with highest molecular weights. The microstructure of the polymers was determined by ¹³C-NMR spectroscopy. Catalyst systems I, II and III produced isotactic polymers while catalyst IV produced polymers with mainly syndiotactic structures but with large amount of stereoregular error. Received: 21 June 2002/Revised version: 4 November 2002/ Accepted: 4 November 2002     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.     

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties

Polyethylene-layered silicate nanocomposites were prepared by the in situ intercalative polymerization of ethylene by the so-called polymerization-filling technique and analyzed by transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Non-modified montmorillonite and hectorite were first treated by trimethylaluminum-depleted methylaluminoxane before being contacted by a Ti-based constrained geometry catalyst. The nanocomposite was formed by addition and polymerization of ethylene. In the absence of a chain transfer agent, ultra high molecular weight polyethylene was produced. The tensile properties of these nanocomposites were poor and essentially independent of the nature and content of the silicate. Upon hydrogen addition, the molecular weight of the polyethylene was decreased with parallel improvement of the tensile and shear moduli, in relation to the filler content. The exfoliation of the layered silicates was confirmed by XRD analysis and TEM observation. The mechanical kneading of the molten nanocomposites resulted in the partial collapse of the exfoliated structure driven by the thermodynamic stability of the layered filler.     

Detecting Fixed Patterns in Chordal Graphs in Polynomial Time

The Contractibility problem takes as input two graphs G and H, and the task is to decide whether H can be obtained from G by a sequence of edge contractions. The Induced Minor and Induced Topological Minor problems are similar, but the first allows both edge contractions and vertex deletions, whereas the latter allows only vertex deletions and vertex dissolutions. All three problems are NP-complete, even for certain fixed graphs H. We show that these problems can be solved in polynomial time for every fixed H when the input graph G is chordal. Our results can be considered tight, since these problems are known to be W[1]-hard on chordal graphs when parameterized by the size of H. To solve Contractibility and Induced Minor, we define and use a generalization of the classic Disjoint Paths problem, where we require the vertices of each of the k paths to be chosen from a specified set. We prove that this variant is NP-complete even when k=2, but that it is polynomial-time solvable on chordal graphs for every fixed k. Our algorithm for Induced Topological Minor is based on another generalization of Disjoint Paths called Induced Disjoint Paths, where the vertices from different paths may no longer be adjacent. We show that this problem, which is known to be NP-complete when k=2, can be solved in polynomial time on chordal graphs even when k is part of the input. Our results fit into the general framework of graph containment problems, where the aim is to decide whether a graph can be modified into another graph by a sequence of specified graph operations. Allowing combinations of the four well-known operations edge deletion, edge contraction, vertex deletion, and vertex dissolution results in the following ten containment relations: (induced) minor, (induced) topological minor, (induced) subgraph, (induced) spanning subgraph, dissolution, and contraction. Our results, combined with existing results, settle the complexity of each of the ten corresponding containment problems on chordal graphs.     

Colour and COD removal from textile effluent by coagulation and advanced oxidation processes

The aim of this study was to compare the performance of coagulation, Fenton's oxidation (Fe²⁺/H₂O₂) and ozonation for the removal of chemical oxygen demand (COD) and colour from biologically pretreated textile wastewater. FeSO₄ and FeCl₃ were used as coagulants at varying doses and varying colour removal efficiency was measured. For the Fenton process, COD and colour removal efficiencies were found to be 78% and 95% for the Fenton process, and to be 64% and 71% for the Fenton-like process (Fe³⁺/H₂O₂), respectively. Ozonation experiments were conducted at different initial pH values and fixed ozone doses. Ozonation resulted in 43% COD and 97% colour removal whereas these rates increased to 54% and 99% when 5 mg/l hydrogen peroxide was added to the wastewater before ozonation at the same dose. The operating costs of all proposed treatment systems were also evaluated in this study.     

A fuzzy constraint-based approach to data reconciliation in material flow analysis

Data reconciliation consists in modifying noisy or unreliable data in order to make them consistent with a mathematical model (herein a material flow network). The conventional approach relies on least-squares minimization. Here, we use a fuzzy set-based approach, replacing Gaussian likelihood functions by fuzzy intervals, and a leximin criterion. We show that the setting of fuzzy sets provides a generalized approach to the choice of estimated values, that is more flexible and less dependent on oftentimes debatable probabilistic justifications. It potentially encompasses interval-based formulations and the least squares method, by choosing appropriate membership functions and aggregation operations. This paper also lays bare the fact that data reconciliation under the fuzzy set approach is viewed as an information fusion problem, as opposed to the statistical tradition which solves an estimation problem.     

Fullerene-based ruthenium catalysts: a novel approach for anchoring metal to carbonaceous supports. I. Structure

The influence of fullerenes and related support materials on the structural and catalytic properties of ruthenium was investigated. Catalysts based on C₆₀, raw fullerene black, extracted fullerene black, cathode deposit and graphite were prepared by an impregnation/activation procedure with Ru₃CO₁₂. The local co-ordination sphere of the resulting highly dispersed X-ray amorphous ruthenium was investigated by means of EXAFS. The dominating role of the presence of non-six-membered carbon rings on the structure and the stability of the Ru particles will be illustrated. This revised version was published online in July 2006 with corrections to the Cover Date.