Towards identifying the roll motion parameters of a motorcycle simulator

This study aimed at identifying the roll motion parameters of a motorcycle simulator prototype. Experienced motorcyclists tuned the angular physical movement of the mock-up and that of the visual scene to achieve an optimal riding experience during curves. The participants exceeded the rolling angles that would be required in real-world riding, while avoiding leaning the mock-up beyond 10°. In addition, they were more influenced by the speed of the virtual motorcycle than by road curvature, especially in a wide field of view. Heterogeneity was found in the roll applied to the visual scene. The overall patterns suggest that at least when washout is not applied to remove the side forces that in real-world riding are compensated by a centrifugal force, greater roll of the visual at the expense of the mock-up is mandatory to avoid performance biases that might be enhanced due to fear of falling off the simulator. Future roll motion models must take into consideration factors such as riding postures, which might not only influence the forces operating on the rider-motorcycle system, but also how motorcyclists perceive the visual world.     

H_5N_1亚型禽流感病毒血凝素基因的克隆及分子进化分析

目的　克隆H5N1 亚型禽流感病毒HA基因并进行分子进化分析。方法　应用RT PCR方法 ,以 2株H5N1 亚型禽流感病毒RNA为模板 ,扩增了HA全基因cDNA。将HAcDNA基因克隆于pUCm T载体 ,并对其进行了测序。结果　所克隆的HA基因全长为 1731bp ,共编码 5 6 8个氨基酸。将该毒株与其它 10株H5亚型禽流感病毒HA基因序列核苷酸及氨基酸进行比较 ,其核苷酸同源性在 80 5 %～ 99 2 %之间 ,氨基酸序列同源性在 89 4 %～98 6 %之间。高致病性毒株HA基因裂解位点存在多个碱性氨基酸插入。结论　为禽流感基因工程疫苗的研制奠定了基础 ,同时通过分子进化分析也揭示了各毒株间的亲缘关系。     

Late season nitrogen fertilization of soybeans: effects on leaf senescence, yield and environment

Nitrogen demand from soybean seeds during seed filling is very high and has been proposed as the cause of nitrogen remobilization and leaf senescence. Previous research has not shown consistent effects of late season fertilization on seed yield, while its effects on leaf senescence have not been evaluated. Two field experiments were performed to determine the effects of a late season N fertilization on leaf senescence and fall, seed yield and its components, and residual soil nitrate, and to evaluate the potential risk of groundwater contamination. Two rates of nitrogen (50 and 100 kg N ha^–1) were applied at the R3 and R5 development stages. Nitrogen fertilization, either at R3 or R5, increased soil nitrate availability during the seed-filling period. Seed yield, seed number and protein content were not affected by N fertilization. The addition of 100 kg N ha^–1 produced a small delay of 1–2 days in the leaf fall, and slightly increased seed size (3.6%). Our results suggest that increasing soil N availability during the seed-filling period is not an effective way to delay leaf senescence or to increase seed growth and yield of soybean. Nitrogen fertilization increased the level of residual nitrate in the top soil at one site (the one with lowest seed yield), increasing the risk of nitrate leaching during subsequent fallow.     

Method for characterization of triacylglycerols and fat-soluble vitamins in edible oils and fats by supercritical fluid chromatography

This study demonstrates the usefulness of capillary supercritical fluid chromatography (SFC) for the characterization of triacylglycerols of edible oils and fats. Triacylglycerols were separated according to the acyl carbon number and the degree of unsaturation on a 25% cyanopropyl/25% phenyl/50% methylpolysiloxane stationary phase. Valuable information concerning the triacylglycerol composition of berry oils was obtained, despite the overlapping of certain triacylglycerol peaks. Simultaneous analysis of fat-soluble vitamins and triacylglycerols is not practical by capillary SFC with flame-ionization detection because of the low concentration of naturally-occurring fat-soluble vitamins in edible oils. Therefore, higher loading of the sample, which led to overloading of triacylglycerols, was required to get reasonable peaks for fat-soluble vitamins. The method was applied to the characterization of triacylglycerols and tocopherols in sea buckthorn pulp and seed oil, and cloudberry seed oil without any sample purification prior to SFC. In addition, the stationary phase proved useful for separating the more complex mixtures of triacylglycerols found in milk fat and in fish oil.     

Activity and Selectivity of a Nanostructured CuO/ZrO2 Catalyst in the Steam Reforming of Methanol

Steam reforming of methanol for production of hydrogen can be carried out over copper based catalyst. In the work presented here, the catalytic properties of a CuO/ZrO₂ catalyst (8.5wt%) synthesised by a templating technique were investigated with respect to activity, long term stability, CO formation, and response to oxygen addition to the feed. The results were obtained using a fixed bed reactor and compared to a commercial methanol synthesis catalyst CuO/ZnO/Al₂O₃. It is shown that, depending on the time on stream, the temporary addition of oxygen to the feed has a beneficial effect on the activity of the CuO/ZrO₂ catalyst. After activation, the CuO/ZrO₂ catalyst is found to be more active (per copper mass) than the CuO/ZnO/Al₂O₃ system, more stable during time on stream (measured up to 250h), and to produce less CO. Structural characterisation by means of X-ray powder diffraction (XRD) and X-ray absorption spectroscopy (XAS) reveals that the catalyst (as prepared) consists of crystalline, tetragonal zirconia with small domain sizes (about 60Å) and small/disordered crystallites of CuO.     

Electrolytical fission at mercury cathodes of an NO single bond in ethers derived from 1-hydroxybenzo(d)-1,2,3-triazoles

The single NO bond in various ethers derived from 1-hydroxybenzo(d)-1,2,3-triazoles is reduced at mercury cathodes in a 2-electron process giving rise to the non-substituted benzotriazole and a corresponding primary alcohol. Controlled-potential electrolysis actually resulted in isolating the products of the above type eg benzotriazole and 2-piperidinoethanol. Cathodic reduction of non-substituted benzotriazole in acid media proceeds evidently via a chemical reaction between benzotriazole and hydrogen obtained by the catalytic reduction of hydrogen ions at the mercury electrode.     

The influence of potential on the anodic dissolution of SIMFUEL (UO2)

The influence of potential on the anodic dissolution of SIMFUEL (doped uranium dioxide) has been characterized over the range 0-500 mV (versus SCE). Cathodic stripping voltammetry was used to determine the changes in surface reactivity of UO₂ in neutral solutions after different anodic oxidation timescales. Scanning electron microscopy (SEM) was used to view the damage to the SIMFUEL electrode surface which was minimal at E < 200 mV but present as local pits and eroded grains after oxidation at higher potentials. Long-term anodic oxidation at potentials below 200 mV suggests that local acidification can develop within surface asperities in the fuel and pores in corrosion product deposits accumulated on the electrode surface.     

Factors influencing encapsulation behavior in composite droplet-type polymer blends

In this study the influence of the molecular weight of the dispersed phase components on encapsulation effects in the composite droplet phase was examined for high density polyethylene (HDPE)/PS/PMMA ternary blends. Three different blends composed of various PS and PMMA materials dispersed in an HDPE matrix were prepared using an internal mixer. The morphology was studied by light and electron microscopy. Current models used for predicting encapsulation effects and composite droplet formation in ternary systems (based on static interfacial tension) predict in all cases that PS will encapsulate the PMMA. However, in one case, an unexpected encapsulation of PS by PMMA was observed. It was found that arguments based on the effect of viscosity ratio or the absolute viscosity of the different dispersed phases do not explain that discrepancy. In addition, the reversal of that latter composite droplet morphology from PMMA encapsulating PS to PS encapsulating PMMA was observed upon annealing treatment. Considering all the above, a conceptual model was developed to predict encapsulation effects in composite droplet type systems based on the use of a dynamic interfacial tension (i.e. taking into account the elasticity of the polymer components). Calculations based on the dynamic interfacial tension model, using elasticities based on constant shear stress, were able to account for all of the observed encapsulation effects in this study.     

Hydrogenation of Citral Over a Polymer Fibre Catalyst

A polymer-supported Pd catalyst was investigated in hydrogenation of citral (3,7-dimethyl-2,6-octadienal), which is a stereoisomer with an isolated and a conjugated double bond as well as a carbonyl group. The catalyst was a fibrous polymer-supported catalyst modified with functional groups and immobilized metals. A comparison of the polymer-supported catalyst with conventional catalysts was made.     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007