Contour diagram fuzzy model for maximum surface ozone prediction

A contour diagram approach is presented for the identification of surface ozone concentration feature based on a set of rules by considering the meteorological variables such as the solar radiation, wind speed, temperature, humidity and rainfall. A fuzzy rule system approach is used because of the imprecise, insufficient, ambiguous and uncertain data available. The contour diagrams help to identify qualitative ozone concentration variability rules which are more general than conventional statistical or time series analysis. In the methodology, ozone concentration contours are based on a fixed variable as ozone precursor, namely, NO_x and as the third variable one of the meteorological factors. Such contour diagrams for ozone concentration variation are prepared for six months. It is possible to identify the maximum ozone concentration episodes from these diagrams and then to set up the valid rules in the form of IF-THEN logical statements. These rules are obtained from available daily ozone, NO_x and meteorological data as a first approximate reasoning step. In this manner, without mathematical formulations, expert maximum ozone concentration systems are identified. The application of the contour diagram approach is performed for daily ozone concentration measurements on European side of Istanbul city. It is concluded that through approximate reasoning with fuzzy rules, the maximum ozone concentration episodes can be identified and predicted without any mathematical expression.     

Effect of phosphoric acid on the performance of low antimony grid of Pb‐acid cell under constant current charging and discharging

Effect of phosphoric acid on the performance of Pb‐1.7%Sb grid of lead‐acid cell is studied in 5 M H₂SO₄ by cyclic galvanostatic polarization and impedance spectroscopy. An increase in capacitance to a maximum is recorded during the initial stages of the electro‐reduction of PbO₂ into Pb(II) compounds and attributed to concurrent compositional and dimensional changes. These changes include removal of O₂ bubbles, insertion of large amounts of H₂SO₄ and H₂O. Efficiency of PbO₂ formation decreases, while its rate of self‐discharge increases with increasing the charging current and in the presence of H₃PO₄. The charge capacity increases with increasing the discharging current due to the decrease in the self‐discharge. The charge capacity is lower in the presence of H₃PO₄. On increasing the cycle number, the corrodibility of the grid increases, because more layers of the surface Pb are involved in the self‐discharge. H₃PO₄ significantly retards the effect of cycle number.     

Preparation and properties of probiotic concentrated yoghurt (labneh) fortified with conjugated linoleic acid

Milk of high conjugated linoleic acid (CLA) level (1.25 g per 100 g milk fat) was produced by inclusion of fish oil and rousted soy bean in the ration of Holstein cows as compared to 0.55 g per 100 g milk fat in the milk of animals receiving control diet. Milk of normal (control) and high CLA content (treatment) was spray‐dried. Labneh was made from 20 g L^?1 reconstituted milk using 3 mL per 100 mL yoghurt starter and 2 mL per 100 mL of probiotic cultures of Lactobacillus casei or Lactobacillus acidophilus. The control (C) and high CLA (T) labneh were analysed chemically and microbiologically, and their viscosities were determined during cold storage for 15 days. The fat content of labneh of high CLA was less than that of the control, but the total solids (TS) were unaffected by the CLA level. Labneh made with Lb. acidophilus had lower TS and higher acidity, exopolysaccharides and acetaldehyde contents and viscosity than that made with the use of Lb. casei. Labneh from the different treatments retained high counts of the added probiotic (>10⁸ cfu g^?1) throughout the storage period. The storage period had significant effects on all parameters determined.     

Ion beam analysis of ancient Egyptian wall paintings

Polychromatic decorations of ancient Egyptians tombs and temples have a long tradition over three millennia but are hard to identify because many pigments have been subjected to severe chemical reactions, which have entirely changed their original colours. Optical microscopy, PIXE and microbeam-PIXE have been used for determination of the nature of pigments, their chronology, and identification of domestic and imported materials. Paint flakes from various archeological sites in Egypt were analyzed: we report the results of the analysis of samples which were collected at the Mortuary Temple of Ramesses III (Habu Town), and the tombs of Tuthmosis III (Valley of the Kings) and Sennefer (Valley of the Noblemen). The paint is composed of grains of sizes typically ranging from 50 μm to 300 μm embedded in binding material and has great non-uniformity of pigment depth and lateral distributions and discontinuity of the paint layers. Qualitative analysis using broad beam PIXE has been performed to allow determination of the average composition of both support and pigments. Microbeam-PIXE has been used for mapping of selected grains. Goethite FeO(OH) (yellow), orpiment As₂S₃ (green), and the two blues: Egyptian Blue CaCuSi₄O₁₀ and Green Frit CaCuSiO₃ (mixed with the red haematite Fe₂O₃) were identified, and interesting details of the painting technique of ancient masters, like blending of pigments and the use of multilayer structures, were revealed.     

Effect of Silane Coupling Agents on Rice Straw Fiber/Polymer Composites

The effect of coupling agents and electron beam (EB) irradiation dose on the mechanical properties of composites made from rice straw fibers and polymers have been studied. Samples were made by hot pressing of mix composition at 130°C. The pressed samples were subjected to electron beam irradiation dose ranged from 10 to 50?kGy. Increasing the electron beam irradiation dose increased the value of flexural strength, modulus of elasticity and impact strength. It was also observed that, the properties of composites containing γ-aminopropyltrimethoxy silane (A-1100) are lower than those of composites containing N-(2aminoethyl)-3-amino propyltrimethoxy silane (A-700) coupling agents. These are attributed to a hydrogen bonding formation between the amine or protonated amine and the hydroxyl groups of rice straw fibers. The presence of coupling agents in the composites during the EB irradiation process produce a more free radicals which are enough to form a chemical bonding between the rice straw fiber and polymer. The thickness swelling and water absorption values decrease with increasing the EB irradiation dose with presence of coupling agents in the composite.     

Four-wave mixing reduction technique based on smart filter approach

This paper proposed a new technique to suppress the four-wave mixing (FWM) effect by using a smart filter technique. The behaviour of FWM and the performance of wavelength division multiplexing systems with 4 and 16 channels were simulated in the presence of the proposed technique. The simulation was also performed under different parameters such as input power, number of channels and channel spacing. The FWM power drastically decreases by 12 and 19 dB for the 4 and 16 channels, respectively, when the smart filter is used as compared with the conventional system. In terms of system performance, the suggested approach for 4 and 16 channels at the first channel offers low bit error rate (BER) values of 3.23 × 10^?23 and 1.7 × 10^?21, respectively. The smart filter with the channel spacing variation for the 4-channel system subsequently improved the BER value at the fourth channel. Results confirm that the smart filter approach is an active solution that can suppress the FWM effect in optical transmission systems.     

Chaotic encryption of speech signals

This paper introduces a speech encryption approach, which is based on permutation of speech segments using chaotic Baker map and substitution using masks in both time and transform domains. Two parameters are extracted from the main key used in the generation of mask. Either the Discrete Cosine Transform (DCT) or the Discrete Sine Transform (DST) can be used in the proposed cryptosystem to remove the residual intelligibility resulting from permutation and masking in time domain. Substitution with Masks is used in this cryptosystem to fill the silent periods within speech conversation and destroy format and pitch information. Permutation with chaotic Baker map is used in to maximize the benefits of the permutation process in encryption by using large-size blocks to allow more audio segments to be permutated. The proposed cryptosystem has a low complexity, small delay, and high degree of security. Simulation results prove that the proposed cryptosystem is robust to the presence of noise.     

Multivariate statistical monitoring of the aluminium smelting process

This paper describes the development of a new ‘cascade’ monitoring system for the aluminium smelting process that uses latent variable models. This system is based on the changes of variability patterns within a feeding cycle which are used to provide indications of faults and their possible causes. The system has been tested offline using 31 data sets. The performance of the system to detect an anode effect has been compared with a typical latent variable model that monitors the change of behaviour at every time instant. The results show that the ‘cascade’ monitoring system is able to detect abnormal events. It was possible to relate each event with specific patterns associated with abnormalities thus facilitating later fault diagnosis.     

Microstructure and phase composition of cordierite-based co-clinker

The aim of this work is to study the effect of phase composition and microstructure of cordierite-based co-clinkers on the electrical properties and coefficient of thermal expansion of cordierite briquettes. To achieve this aim talc and kaolinite samples were collected from quarries in the Egyptian desert. The samples are characterized using XRD, XRF, polarized light, cathodoluminescence and SEM microscopy attached with EDAX, in addition to X-ray micro-computed tomography (3D- µXCT). The electrical properties and coefficient of thermal expansion of the cordierite briquettes are determined using HiTESTER instrument and automatic Netzsch DIL402 PC dilatometer, respectively.Five talc-based batches were shaped and fired in the temperature range 1000–1350 °C for 2 h. The microstructural and physical characteristics of the resulted cordierite-based co-clinkers depend mainly on the viscosity of the liquid phase developed during firing. The microchemistry of the cordierite briquettes confirms their enrichment of both cordierite and ferroan-cordierite crystallized directly from locally developed melts. The dielectric constant and loss factor values for cordierite briquettes allow their possible use as insulator components in electronic applications.     

Single-Row Transformation of Complete Graphs

A complete graph is a fully-connected graph where every node is adjacent to all other nodes in the graph. Very often, many applications in science and engineering are reducible to this type of graph. Hence, a simplified form of a complete graph contributes in providing the solutions to these problems. In this paper, we present a technique for transforming a complete graph into a single-row routing problem. Single-row routing is a classical technique in the VLSI design that is known to be NP-complete. We solved this problem earlier using a method called ESSR, and, the same technique is applied to the present work to transform a complete graph into its single-row routing representation. A parallel computing model is proposed which contributes in making the problem modular and scalable. We also discuss the application of this work on the channel assignment problem in the wireless cellular telephone networks.