A computationally efficient selected mapping technique for reducing PAPR of OFDM

In orthogonal frequency division multiplexing (OFDM) system, high value of peak-to-average power ratio (PAPR) is an operational problem that may cause non-linear distortion resulting in high bit error rate. Selected mapping (SLM) is a well known technique that shows good PAPR reduction capability but inflicts added computational overhead. In this paper, using Riemann sequence based SLM method, we applied reverse searching technique to find out low PAPR yielding phase sequences with significant reduction in computational complexity. Additionally, we explored side-information free transmission that achieves higher throughput but sacrifices PAPR reduction. Finally, to overcome this loss in PAPR reduction, we proposed application of Square-rooting companding technique over the output OFDM transmitted signal. Simulation results show that the proposed method is able to compensate the sacrifice in PAPR and achieved PAPR reduction of 8.9 dB with very low computational overhead.     

A Guard Code Scheme for Handover Traffic Management in WCDMA Systems

A key performance indicator of mobile wireless networks is failure probability of handover calls. In this paper, we propose a Call Admission Control policy which prioritizes handover calls over new calls in WCDMA systems. The OVSF code occupancy of the system is modeled by a Markov chain and the differentiation between handover and new calls is performed at the code level by introducing a “guard code” scheme. The scheme belongs to the well-known family of guard channel schemes and reserves some code capacity to favor the continuation of handover calls over the new calls. As the management of the general case is intractable, we solve certain numerical instances of the problem and manage to calculate several performance metrics like new call blocking and handover failure probabilities and code utilization. We complete our study with simulation results in the case of higher OVSF code tree capacity.

Long Duration Persistent Photocurrent in 3 nm Thin Doped Indium Oxide for Integrated Light Sensing and In-Sensor Neuromorphic Computation

Miniaturization and energy consumption by computational systems remain major challenges to address. Optoelectronics based synaptic and light sensing provide an exciting platform for neuromorphic processing and vision applications offering several advantages. It is highly desirable to achieve single-element image sensors that allow reception of information and execution of in-memory computing processes while maintaining memory for much longer durations without the need for frequent electrical or optical rehearsals. In this work, ultra-thin (<3 nm) doped indium oxide (In₂O₃) layers are engineered to demonstrate a monolithic two-terminal ultraviolet (UV) sensing and processing system with long optical state retention operating at 50 mV. This endows features of several conductance states within the persistent photocurrent window that are harnessed to show learning capabilities and significantly reduce the number of rehearsals. The atomically thin sheets are implemented as a focal plane array (FPA) for UV spectrum based proof-of-concept vision system capable of pattern recognition and memorization required for imaging and detection applications. This integrated light sensing and memory system is deployed to illustrate capabilities for real-time, in-sensor memorization, and recognition tasks. This study provides an important template to engineer miniaturized and low operating voltage neuromorphic platforms across the light spectrum based on application demand.     

A review of routing strategies for optical burst switched networks

The exact contribution of this paper is a review of existing state‐of‐the‐art routing strategies for optical burst switched networks developed by researchers to deal with burst contention before it happens. Routing schemes are implemented in space domain, which make them simple and cost effective. Additionally, the paper points out the importance of routing as an effective way to deal with burst contention compared to other solutions. It also underlines the main differences between contention avoidance schemes and contention resolution techniques for optical burst switched networks. We believe that this review will help different optical burst switched researchers involved in the development of route optimization algorithms to control burst contention. Copyright © 2011 John Wiley & Sons, Ltd.     

Modifying asphalt emulsion with different types of polymers for surface treatment applications

Asphalt emulsion produced from local asphalt 60/70 (Suez Co.) was modified with different types of polymers such as epoxy resin, latex styrene butadiene styrene (SBS), poly vinyl acetate (PVA), and with a mixture of two or more types of above mentioned polymers to produce a modified asphalt emulsion with high performance. This paper describes the method and technique for preparing asphalt emulsion as well as the tests, and evaluates several aspects concerning the prepared emulsion such as performance of evaporation residues, fuel and acid resistance, rheological properties, and durability. The results obtained revealed that all the modified asphalt emulsions gave better performance as compared with unmodified emulsion. Asphalt emulsion modified with a mixture of epoxy resin, latex SBR, and PVA showed the best road performance in terms of fuel and acid resistance. It was observed that the weight loss for unmodified binder, residue after evaporation of water, after immersion in kerosene for 120 min is 90% of its initial weight, while the binder improved with a mixture of SBS latex, epoxy resin, and PVA showed a weight loss of ?16% and 9% of its initial weight. Also, the admixture gives high acid resistance (weight loss ～ 9%) after immersing in 5% HCl. The dynamic viscosity test showed that asphalt emulsion modified with a mixture of SBS latex, epoxy resin, and PVA has the highest viscosity value which is a promising indication about the validity of its use for pavement in different applications.     

Control the corrosion of mild steel using synthesized polymers based on polyacrylamide

In this work polyacrylamide (PACM) was prepared by radical polymerization technique using ammonium persulfate (APS) as initiator under nitrogen atmosphere. The viscosity average molecular weight of the prepared PACM was found to be 177858. The free amino groups of PACM, poly(2-methoxyaniline) was grafted by the oxidation of 2-methoxyaniline using APS in acidic medium under nitrogen atmosphere. The grafting percent is found to be 96%. The morphology of the obtained PACM and PACM-g-P2-MeOANI was studied by X-ray diffraction and scanning electron microscope. The grafting process enhances the morphology of both PACM and poly(2-methoxyaniline). The inhibiting effect of the three polymers on the mild steel corrosion in the 1.0?M HCl as aggressive environments have been measured gravimetrically at three different temperatures 25, 40 and 55?°C and electrically at 25?°C. The inhibition efficiencies of the three tested polymers were found to increase with temperature. The poly(2-methoxyaniline) is the most effective one as a corrosion inhibitor at all tested temperatures. The adsorption behavior of the polymers was found to follow Villamil isotherm and the values of the change in free energy refer to a mixed chemical and physical adsorption on the steel surface. Tafel curves indicate that the tested polymers act as mixed anodic and cathodic inhibitor. The double layer capacitance was found to decrease with increasing the inhibitor concentration.     

Coexistence of OFDM‐Based IMT‐Advanced and FM Broadcasting Systems

Coexistence analysis is extremely important in examining the possibility for spectrum sharing between orthogonal frequency‐division multiplexing (OFDM)‐based international mobile telecommunications (IMT)‐Advanced and other wireless services. In this letter, a new closed form method is derived based on power spectral density analysis in order to analyze the coexistence of OFDM‐based IMT‐Advanced systems and broadcasting frequency modulation (FM) systems. The proposed method evaluates more exact interference power of IMT‐Advanced systems in FM broadcasting systems than the advanced minimum coupling loss (A‐MCL) method. Numerical results show that the interference power is 1.3 dB and 3 dB less than that obtained using the A‐MCL method at cochannel and adjacent channel, respectively. This reduces the minimum separation distance between the two systems, which eventually saves spectrum resources.     

Fuzzy logic control of FES rowing exercise in paraplegia

An indoor personal rowing machine (Concept 2 Inc., Morrisville, VT) has been modified for functional electrical stimulation assisted rowing exercise in paraplegia. To successfully perform the rowing maneuver, the voluntarily controlled upper body movements must be coordinated with the movements of the electrically stimulated paralyzed legs. To achieve such coordination, an automatic controller was developed that employs two levels of hierarchy. A high level finite state controller identifies the state or phase of the rowing motion and activates a low-level state-dedicated fuzzy logic controller (FLC) to deliver the electrical stimulation to the paralyzed leg muscles. A pilot study with participation of two paraplegic volunteers showed that FLC spent less muscle energy, and produced smoother rowing maneuvers than the existing On-Off constant-level stimulation controller.     

Proposal for st-Routing Protocol

A routing protocol chooses one of the several paths (routes) from a source node to a destination node in the computer network, to send a packet of information. In this paper, we propose a new routing protocol, which we call st-routing protocol, based on st-numbering of a graph. The protocol fits well in noisy environments where robustness of routing using alternative paths is a major issue. The proposed routing protocol provides a systematic way to retry alternative paths without generating any duplicate packets. The protocol works for only those networks that can be represented by biconnected graphs.     

Performance prediction of shaded pole induction motors

The authors present an analysis for evaluating the performance characteristics of reluctance-augmented shaded pole motors. The proposed model is based on the d-q axis technique and is valid for steady-state and dynamic conditions. An efficient method of predicting the steady-state operating characteristics of the triac-controlled shaded pole motor is presented. This method calculates the currents and average torque as a function of conduction and control angles of the triac. The effect of critical parameters on the motor performance is investigated. Simulated results are compared with experimental values of a two-pole single phase test induction motor