Radiation synthesis of hydrogels based on carboxymethyl cellulose and its application in removal of pollutants from wastewater

Synthesis of carboxymethyl cellulose‐g‐methacrylic acid/acrylamide Poly(CMC/MAAc:AAm) hydrogel was carried out using direct radiation copolymerization technique at ambient temperature. The gel (%) increased with increasing the content of AAm till level off at Poly(CMC/MAAc:AAm) (1/50:50 wt%) hydrogel and the swelling behavior found to be increased with increasing MAAc content in the hydrogel composition up to Poly(CMC/MAAc:AAm) (1/60:40 wt%). The grafting yield, grafting ratio, swelling behavior, and the thermal stability of Poly(CMC/MAAc:AAm) binary system are higher than those reported in our previous study by the same author which described the individual grafting of acrylamide (AAm) and methacrylic acid (MAAc) with different concentration onto carboxymethyl cellulose (CMC) using direct radiation grafting technique. The swelling kinetics and diffusion mechanism indicate that the water penetration obey non‐Fickian transport mechanism. The characterization of the prepared hydrogel was evaluated using Fourier transform infrared, X‐ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The analyses by different analytical tools confirmed the successful grafting of both MAAc and AAm onto CMC. The adsorption capacity of Poly(CMC/MAAc:AAm) (1/60:40 wt%) hydrogel toward metal ions such as Cu⁺² and Co⁺², dyes such as acid blue dye and methyl green have been investigated. J. VINYL ADDIT. TECHNOL., 25:E35–E43, 2019. © 2017 Society of Plastics Engineers     

Utility of Zinc (Lignin/Silica/Fatty Acids) Complex Driven From Rice Straw as Antioxidant and Activator in Rubber Composites

This article presents a method to precipitate zinc (lignin/silica/fatty acids) complex (Zn LSF complex) from the black liquor of pulped rice straw and studying the efficiency of it as green activator and antioxidant in natural rubber composites. The results obtained revealed that the investigated zinc complex has dual function as activator and antioxidant in natural rubber composites. This evaluation was supported by physico‐mechanical properties of the vulcanizates which showed a considerable improvement of rheometric characteristics, tensile strength, strain at break, hardness, Young's modulus, thermal oxidative aging, and thermal stability of NR composites. The composite loaded with 7 phr of Zn LSF complex as activator exhibited the best mechanical properties in comparison with the same concentrations of control activator zinc stearate. Also, results revealed that Zn LSF complex is efficient as antioxidant in NR vulcanizates compared conventional antioxidants, namely polymerized 2,2,4‐trimethyl‐1,2‐dihydroquinoline. POLYM. ENG. SCI., 59:E196–E205, 2019. © 2018 Society of Plastics Engineers     

Mechanical properties of gamma‐irradiated styrene‐butadiene rubber/acid‐treated vermiculite clay/maleic anhydride nanocomposites

Nanoparticle vermiculite (VMT) clay was prepared by treatment with hydrochloric acid. Styrene‐butadiene rubber (SBR) nanocomposites were prepared by mixing different contents (2.5, 5, 7.5, and 10 phr) of untreated (VMT) and acid‐treated (DVMT) vermiculite clay, respectively. In addition, different contents (3, 7, and 10 phr) of maleic anhydride (MA) as compatibilizer were mixed via direct melt compounding in internal mixer. The effect of gamma irradiation, VMT clay, and MA contents on the mechanical properties was studied. The acid‐treated VMT clay was characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared (FT‐IR) spectroscopy. Meanwhile, the SBR/VMT composites, SBR/DVMT, and SBR/DVMT/MA nanocomposites were characterized via crosslinking density and tensile mechanical testing and FT‐IR spectroscopic analysis. The results indicated that good yield of nanoparticle vermiculite was achieved when the acid treatment was carried out for 120 h. In addition, the results showed that the presence of DVMT clay improved the chemical bonding in the SBR nanocomposites and hence their mechanical properties. The highest improvement was obtained when the contents of DVMT clay, MA, and irradiation dose were 10 phr, 3 phr, and 100 kGy, respectively. POLYM. ENG. SCI., 59:355–364, 2019. © 2018 Society of Plastics Engineers     

Diglycidyl ether of bisphenol A/chitosan‐graft‐polyaniline composites with electromagnetic interference shielding properties: Synthesis,characterization, and curing kinetics

Conducting filler based on chitosan and grafted polyaniline (Ch‐g‐PANI) was prepared with different grafting ratios and used as fillers for polyester powder coating system. Differential scanning calorimetry is applied to study the effect of Ch‐g‐PANI on the curing of the polyester powder coating. The activation energy calculated by isoconversional Kissinger method was increased by either increasing the Ch‐g‐PANI content or the content of polyaniline in the filler, suggesting the contribution of the filler in the curing reactions. The cured samples were characterized using FTIR and TG analyses. Thermogravimetric analysis showed that the total thermal stability was enhanced upon the filler addition as detected from the values of integral procedural decomposition temperature. Furthermore, a dielectric study showed that the dielectric constant and loss were increased upon increasing of the filler. Vogel–Fulcher–Tammann equation was well‐fitted when used to examine the dependence of α‐relaxation on the temperature and the dielectrically calculated T_g values were comparable to that measured by DSC. The shielding effectiveness toward microwaves was enhanced by increasing the filler content. POLYM. ENG. SCI., 59:372–381, 2019. © 2018 Society of Plastics Engineers     

Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004     

Dynamic mechanical properties of agricultural residues‐filled polystyrene

Agricultural residues (cotton straw) were added as very small particles to polystyrene (PS) at different weight ratios by using a melt‐mixing technique. The dynamic mechanical tests were performed over a wide range of temperatures and frequencies by using an ARES rheometer (Rheometrics Scientific) operated in the dynamic mode. The dynamic mechanical properties in terms of the storage modulus (G′), loss modulus (G″), compliance moduli, loss tangent, and dynamic viscosity were studied and compared for PS and PS composite. The results showed that the dynamic mechanical moduli and viscosity were found to increase with the addition of cotton straw and rise further with its loading increasing. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 37–40, 2004     

Radiation crosslinking and sorption properties of hydrogels based on 1‐vinyl‐2‐pyrrolidone,hydroxyethyl methacrylate,and their copolymers

This work has been concerned with the synthesis of the hydrogels of poly (vinyl pyrrolidone) (NVP), poly (hydroxy ethylmethacrylate) (HEMA), and their copolymer under the effect of gamma radiation in the presence of N,N‐methylenebisacryl‐amide (MBAm) as a crosslinking agent. The effect of the different factors that may affect the gelation and yield product, such as solvent composition and irradiation dose, was investigated. The formed hydrogels were characterized in terms of swelling in water and different organic solvents, X‐ray diffraction (XRD), and IR spectroscopic analysis. The sorption capability of these hydrogels towards some commercial basic and acid dyesstuffs was also studied. The results showed that a solvent mixture composed of equal contents of water and methanol is the most suitable to afford the minimum sol fraction and the highest yield product at a minimal irradiation dose of 10 kGy. It was observed that NVP hydrogel displayed the highest swelling in water, alcohols, and dimethyformamide of ～1300% and a lower tendency to swell in nonpolar solvents. The results showed that HEMA hydrogel has a high affinity to absorb basic dyes while NVP has a tendency for acid dyes. Also, the sorption of either the basic or acid dyes by the different hydrogels was found to greatly depend on the concentration of dye in solution and the mass of the used hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3274–3280, 2004     

Raman spectroscopic study of CdS,PVA composite films

A new material, which can be used in solar energy utilization, is obtained here by adding different weights of poly(vinyl alcohol) (PVA) to the semiconducting material CdS. The effect of this addition was studied by using FT‐Raman spectrometer (based on 1500 mW Nd : YAG laser at 1064 nm), UV–Vis‐IR (190–800 nm) spectrophotometer, and X‐ray diffractometer. Our experimental results indicated the appearance of several new Raman bands, which have not existed in both CdS and PVA. Some of the bands which are already existing in the Raman spectra of PVA showed an unexpected systematic increase in their intensities after the addition of CdS to the matrix. On the other hand, some of the new Raman bands appeared in special concentrations of PVA only, whereas some of the Raman bands of CdS were found to disappear after adding PVA. Finally, shifts in some bands associated with random increase in their intensities after adding PVA to CdS was detected in the FT‐Raman analysis. The experimental evidence given here might be attributed to the occurrence of new bonds, indicating that the produced mixture is a new material. The assignment of the new bands as well as an interpretation of the obtained variations is given here. Our X‐ray diffraction data confirmed the interpretation introduced here. Moreover, the UV–Vis spectra confirmed the existence of new absorption bands in the Visible region. The I‐V characteristic curve was measured for a selected concentration of the new composite material, showing a remarkable increase in the values of the conduction current of about two orders of magnitude as compared with the pure PVA material. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1984–1992, 2004