Etude du systeme KPO3-LaP3O9. Donnees cristal lographiques sur K2La(PO3)5 et (NH4)2La(PO3)5

The system KPO₃-LaP₃O₉ has been studied for the first time by differential thermal analysis and X ray diffraction. The system shows two compounds KLa(PO₃)₄ and K₂La(PO₃)₅ which melt in a peritectic decomposition at 880°C and 770°C respectively. An eutectic point appears at 705°C; The eutectic point corresponds to a concentration of 10% molar LaP₃O₉.Infra Red absorption spectra are typical of chain phosphates.The new compound K₂La(PO₃₅ is isotypic whith (NH₄)₂La(PO₃)₅ which has been synthetized for the first time. They belong to the triclinic system whith space group P1 and Z = 2. The parameters of the unit cell are: $\text{a = 7.309(4)}\text{A}\text{?}$$\text{b = 13.35(2)}\text{A}\text{?}$$\text{c = 7.155(7)}\text{A}\text{?}$α = 90°3(1) β = 109°17(7) γ = 89°90(4) for K₂La(PO₃)₅ and: $\text{a = 7.174(8)}\text{A}\text{?}$$\text{b = 13.38(2)}\text{A}\text{?}$$\text{c = 7.35(2)}\text{A}\text{?}$α = 90°6(2) β = 107°4(1) γ = 89°82(7) for (NH₄)₂La(PO₃)₅.     

Optimised geometry to calculate dose rate conversion coefficient for external exposure to photons

A single-parameter geometry to describe soil is achieved for Monte Carlo calculation of absorbed dose rate in air for photon emitters from natural radionuclides. This optimised geometry based on physical assumptions consists of the soil part whose emitted radiation has a given minimum probability to reach the detector. This geometry was implemented in Geant4 toolkit and a significant reduction in computation time was achieved. Simulation tests have shown that for soil represented by a cylinder of 40 m radius and 1 m deep, >98% of the calculated dose rate conversion coefficients in air at 1 m above the ground is generated by only 6% of the soil volume in the case of uniform distribution of radioactivity, and >99.2% of the calculated dose rate for an exponential distribution. When the soil is represented by the entire optimised geometry, 99% of the conversion coefficients values are reached for a soil depth of 1 m and 100% for that of approximately 2 m.     

A new computationally efficient hybrid fdtLM–WCIP method

This article presents a new hybrid technique which combines two different numerical methods in the frequency domain, namely the Frequency Domain Transmission Line Matrix ( fdtLM) and the Wave Concept Iterative Process, to analyse three-dimensional (3D) microwave structures. As a result, a considerable reduction of the computation time and required computer memory is achieved compared with the classic fdtLM. The good agreement between simulation results and experimental published data validates the present analysis approach.     

Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials

In this paper, one-dimensional model for evaluating coupled heat and moisture transfer in porous building materials was proposed. The transient partial differential equations system was solved analytically for Dirichlet boundary conditions. It consists first to introduce the Laplace transformation and then to use the potential function technique. This approach allows simplifying the initial mathematical problem to a fourth order ordinary differential equation which can be easily solved. This solution was used to assess the transient temperature and moisture distribution across materials. A comparison with numerical models from Luikov [2] and Vafai et al. [12] was performed, a good agreement was obtained.     

Fatty acids, 4‐desmethylsterols,and triterpene alcohols from Tunisian lentisc (Pistacia lentiscus) fruits

A comparative study was performed to determine the fatty acid, 4‐desmethylsterol and triterpenic alcohols compositions of three different Tunisian populations of Pistacia lentiscus fruit Rimel (RM), Korbous (KO), and Tebaba (TB). Fruits are rich in lipids, which varied from 39.37% (KO) to 42.48% (TB) on a dry weight basis. Qualitatively, fatty acid, sterol, mono‐ and dimethylsterol composition is identical for all populations. Oleic acid was the major fatty acid for all samples, accounting from 40.49% in TB population to 50.72% in RM population followed by the palmitic and linoleic acids. Other fatty acids are present at lower levels. Total sterol amount varied from 109.72 mg/100 g of oil (KO) to 434.26 mg/100 g of oil (RM) with an average of 248.74 mg/100 g of oil. The major 4‐desmethylsterol component in all studied Tunisian populations of P. lentiscus oil was ß‐sitosterol followed by campesterol in TB and KO, and by stigmasterol in RM. The amount of total triterpenic alcohols varied from 42.39 mg/100 g of oil in RM population to 70.41 mg/100 g oil in TB population. The quantitative difference in the fatty acids and 4‐desmethylsterols of the different populations studied could be due to the effect of geographic region and soil type.     

Salt effect on phenolics and antioxidant activities of Tunisian and Canadian sweet marjoram (Origanum majorana L.) shoots

BACKGROUND: Two varieties of Origanum majorana (Canadian and Tunisian) were evaluated for their phenolic, flavonoid and tannin contents, individual phenolic compounds and antioxidant activities under NaCl constraint. RESULTS: The results showed a significant variability in phenolic composition and antioxidant behavior between the two varieties under salt stress. The phenolic composition of methanolic extracts was determined by reversed‐phase high‐performance liquid chromatography. Amentoflavone was the predominant flavonoid compound; in addition, trans‐2‐hydrocinnamic acid became the major phenolic acid with salt treatment of the Tunisian variety. In the control, Canadian variety extract was characterized by high levels of gallic acid and amentoflavone. However, under 75 mmol L^?1 NaCl, gallic acid content doubled, whereas amentoflavone content was maintained in the Canadian variety. Stimulation of phenolic acid biosynthesis was observed in these two varieties under salt treatment despite the fact that shoots of the Tunisian variety showed higher antioxidant activities compared to those from the Canadian variety. Tunisian O. majorana might have developed tolerance to salinity and avoided tissue damage by activating enzymes involved in the galactosylation of quercetin into quercetin‐3‐galactoside and quercetin‐3‐rhamnoside. CONCLUSION: Our results confirmed the tolerance of Tunisian O. majorana plants. Copyright © 2012 Society of Chemical Industry     

Effects of static magnetic fields on growth and membrane lipid composition of Salmonella typhimurium wild-type and dam mutant strains

This study was carried out to explore the adaptive mechanisms of S. typhimurium particularly, the implication of the Dam methyltransferase in the remodelling of membrane lipid composition to overcome magnetic field stress. With this aim, we focused our analyses on the increase in viable numbers and membrane lipid modifications of S. typhimurium wild-type and dam mutant cells exposed for 10h to static magnetic fields (SMF; 200 mT). For the wild-type strain, exposure to SMF induced a significant decrease (p<0.05) of CFU at 6h, followed by an increase between 8 and 10h. Growth of the dam mutant was significantly affected (p<0.05) after 6h and no recovery was observed until 10h, highlighting a different behavior of SMF stressed wild-type and dam mutant strains. SMF significantly affected the phospholipid proportions in the two strains. The most affected were those of the acidic phospholipids, cardiolipins (CL). In the dam strain the phospholipid response to SMF followed a globally similar trend as in the wild-type with however lower effects, leading mainly to an unusual accumulation of CL. This would in part explain the different behavior of the wild-type and the dam strain. Results showed a significant increase of membrane cyclic fatty acids Cyc17 and Cyc19 in the wild-type strain but only the Cyc17 in the dam strain and a meaningful increase of the total unsaturated fatty acids (UFAs) to total saturated fatty acids (SFAs) ratios of the exposed cells compared to controls from 3 to 9h (p<0.05) for both strains. The net increase of the total UFAs to total SFAs ratios seemed to result mainly from the increase of (C18:1) proportion (p<0.05) and to a lower extent from that of (C16:1) (p<0.05). These modifications of cyclic and unsaturated fatty acid proportions constitute an adaptive response to SMF stress in S. typhimurium wild-type and dam mutants to maintain an optimum level of membrane fluidity under SMF.     

Hypoelastic,hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming

The clear multi-scale structure of composite textile reinforcements leads to develop continuous and discrete approaches for their forming simulations. In this paper two continuous modelling respectively based on a hypoelastic and hyperelastic constitutive model are presented. A discrete approach is also considered in which each yarn is modelled by shell finite elements and where the contact with friction and possible sliding between the yarns are taken into account. Finally the semi-discrete approach is presented in which the shell finite element interpolation involves continuity of the displacement field but where the internal virtual work is obtained as the sum of tension, in-plane shear and bending ones of all the woven unit cells within the element. The advantages and drawbacks of the different approaches are discussed.     

Effects of Stitching on Delamination of Satin Weave Carbon-Epoxy Laminates Under Mode I,Mode II and Mixed-Mode I/II Loadings

The objective of the present study is to characterize the effect of modified chain stitching on the delamination growth under mixed-mode I/II loading conditions. Delamination toughness under mode I is experimentally determined, for unstitched and stitched laminates, by using untabbed and tabbed double cantilever beam (TDCB) tests. The effect of the reinforcing tabs on mode I toughness is investigated. Stitching improves the energy release rate (ERR) up to 4 times in mode I. Mode II delamination toughness is evaluated in end-notched flexure (ENF) tests. Different geometries of stitched specimens are tested. Crack propagation occurs without any failure of stitching yarns. The final crack length attains the mid-span or it stops before and the specimen breaks in bending. The ERR is initially low and gradually increases with crack length to very high values. The mixed-mode delamination behaviour is investigated using a mixed-mode bending (MMB) test. For unstitched specimens, a simple mixed-mode criterion is identified. For stitched specimens, stitching yarns do not break during 25% of mode I ratio tests and the ERR increase is relatively small compared to unstitched values. For 70% and 50% of mode I ratios, failures of yarns are observed during crack propagation and tests are able to capture correctly the effect of the stitching: it clearly improves the ERR for these two mixed modes, as much as threefold.     

Magnetic entropy change in the monovalent doping La<Subscript>0.7</Subscript>Ba<Subscript>0.2</Subscript>M<Subscript>0.1</Subscript>MnO<Subscript>3</Subscript> (M = Na,Ag, K) manganites

Structural, magnetic, and magnetocaloric properties of monovalent doped La_0.7Ba_0.2M_0.1MnO₃ (M = Na, Ag, K) powder samples, synthesized using the solid state reaction at high temperature, have been experimentally investigated. The Rietveld refinement of the X-ray powder diffraction shows that all our synthesized samples are single phase and crystallize in the distorted rhombohedral system with space group. Lattice parameters and the unit cell volume increases with increasing average A-site ionic radius 〈r _A〉. The Mn–O–Mn bond angle decreases with increasing 〈r _A〉, ranging from 168.32° (M = Na) to 165.91° (M = K). All our studied samples undergo a paramagnetic–ferromagnetic transition. The Curie temperature T _C, shifts slightly to a lower temperature with increasing 〈r _A〉, which is consistent with large cationic disorder. Magnetic entropy change, , deduced from isothermal magnetization curves, reaches 3.04, 3.14, and 3.01 J/kg K for M = Na, Ag, and K, respectively, in a magnetic applied field change of 5T. Large relative cooling power (RCP) value of 337.9 J/kg is obtained for La_0.7Ba_0.2K_0.1MnO₃ sample, at a field change of 5T. This relatively large value associated to a Curie temperature of 311.5 K makes the present compound a promising candidate for the magnetic refrigerators around room temperature.