High Areal Capacity Li‐Ion Storage of Binder‐Free Metal Vanadate/Carbon Hybrid Anode by Ion‐Exchange Reaction

Storing more energy in a limited device area is very challenging but crucial for the applications of flexible and wearable electronics. Metal vanadates have been regarded as a fascinating group of materials in many areas, especially in lithium‐ion storage. However, there has not been a versatile strategy to synthesize flexible metal vanadate hybrid nanostructures as binder‐free anodes for Li‐ion batteries so far. A convenient and versatile synthesis of M_xV_yO_x+2.5y@carbon cloth (M = Mn, Co, Ni, Cu) composites is proposed here based on a two‐step hydrothermal route. As‐synthesized products demonstrate hierarchical proliferous structure, ranging from nanoparticles (0D), and nanobelts (1D) to a 3D interconnected network. The metal vanadate/carbon hybrid nanostructures exhibit excellent lithium storage capability, with a high areal specific capacity up to 5.9 mAh cm^?2 (which equals to 1676.8 mAh g^?1) at a current density of 200 mA g^?1. Moreover, the nature of good flexibility, mixed valence states, and ultrahigh mass loading density (over 3.5 mg cm^?2) all guarantee their great potential in compact energy storage for future wearable devices and other related applications.     

Deformation of Mesoporous Titania Nanostructures in Contact with D2O Vapor

For many applications, mesoporous titania nanostructures are exposed to water or need to be backfilled via infiltration with an aqueous solution, which can cause deformations of the nanostructure by capillary forces. In this work, the degree of deformation caused by water infiltration in two types of mesoporous, nanostructured titania films exposed to water vapor is compared. The different types of nanostructured titania films are prepared via a polymer template assisted sol–gel synthesis in conjunction with a polymer‐template removal at high‐temperatures under ambient conditions versus nitrogen atmosphere. Information about surface and inner morphology is extracted by scanning electron microscopy and grazing incidence small‐angle neutron scattering (GISANS) measurements, respectively. Furthermore, complementary information on thin film composition and porosity are probed via X‐ray reflectivity. The backfilling induced deformation of near surface structures and structures inside the mesoporous titania films is determined by GISANS before and after D₂O infiltration. The respective atmosphere used for template removal influences the details of the titania nanostructure and strongly impacts the degree of water induced deformation. Drying of the films shows reversibility of the deformation.     

The AT&T Internet Difference Engine: Tracking and viewing changes on the web

The AT&T Internet Difference Engine (AIDE) is a system that finds and displays changes to pages on the World Wide Web. The system consists of several components, including a webcrawler that detects changes, an archive of past versions of pages, a tool called HtmlDiff to highlight changes between versions of a page, and a graphical interface to view the relationship between pages over time. This paper describes AIDE, with an emphasis on the evolution of the system and experiences with it. It also raises some sociological and legal issues.     

Spectral Measurement of the Film-Substrate Index Difference in Proton-Exchanged LiNbO(3) Waveguides

We report the spectral characterization of proton-exchanged lithium niobate (PE:LiNbO(3)) waveguides in terms of the variation of the refractive-index difference between the waveguiding layer and the substrate. The dispersion of the extraordinary refractive-index increase (deltan(e)) is measured from 405 to 1319 nm with several light sources. Two types of proton-exchanged waveguide, prepared under different conditions, are studied. These measurements should be of use in the optimization of PE:LiNbO(3) waveguides for nonlinear optical applications, particularly in second-harmonic generation in the blue-green wavelength region.     

Minimum‐variance control of astronomical adaptive optic systems with actuator dynamics under synchronous and asynchronous sampling

Adaptive optic (AO) systems are now routinely used in ground‐based telescopes to counter the effects of atmospheric turbulence. A deformable mirror (DM) generates a correction wavefront, which is subtracted from the turbulent wavefront using measurements of the residual phase provided by a wavefront sensor (WFS). Minimizing the variance of the residual phase defines a sampled data control problem combining a continuous time minimum‐variance (MV) performance criterion with a discrete‐time controller. For a fairly general class of linear time‐invariant DM and turbulence WFS models, this control problem can be transformed into an equivalent discrete‐time LQ optimization problem involving a set of (discrete‐time) control‐sufficient statistics of the incoming continuous‐time turbulence. This paper shows how to constructively solve this MV problem in the presence of DM's dynamics, starting from continuous‐time models of DM and turbulence. This result is extended to the case of asynchronous DM/WFS sampling. An illustrative application to optimal control of tip‐tilt turbulent modes for the European extremely large telescope in the presence of first‐order DM's dynamics is presented. Copyright © 2010 John Wiley & Sons, Ltd.     

Design of UDE‐based controllers from their two‐degree‐of‐freedom nature

The control algorithm based on the uncertainty and disturbance estimator (UDE) is a robust control strategy and has received wide attention in recent years. In this paper, the two‐degree‐of‐freedom nature of UDE‐based controllers is revealed. The set‐point tracking response is determined by the reference model, whereas the disturbance response and robustness are determined by the error feedback gain and the filter introduced to estimate the uncertainty and disturbances. It is also revealed that the error dynamics of the system is determined by two filters, of which one is determined by the error feedback gain and the other is determined by the filter introduced to estimate the uncertainty and disturbances. The design of these two filters are decoupled in the frequency domain. Moreover, after introducing the UDE‐based control, the Laplace transform can be applied to some time‐varying systems for analysis and design because all the time‐varying parts are lumped into a signal. It has been shown that, in addition to the known advantages over the time‐delay control, the UDE‐based control also brings better performance than the time‐delay control under the same conditions. Design examples and simulation results are given to demonstrate the findings. Copyright © 2010 John Wiley & Sons, Ltd.