Path diversification for future internet end-to-end resilience and survivability

Path Diversification is a new mechanism that can be used to select multiple paths between a given ingress and egress node pair using a quantified diversity measure to achieve maximum flow reliability. The path diversification mechanism is targeted at the end-to-end layer, but can be applied at any level for which a path discovery service is available. Path diversification also takes into account service requirements for low-latency or maximal reliability in selecting appropriate paths. Using this mechanism will allow future internetworking architectures to exploit naturally rich physical topologies to a far greater extent than is possible with shortest-path routing or equal-cost load balancing. We describe the path diversity metric and its application at various aggregation levels, and apply the path diversification process to 13 real-world network graphs as well as 4 synthetic topologies to asses the gain in flow reliability. Based on the analysis of flow reliability across a range of networks, we then extend our path diversity metric to create a composite compensated total graph diversity metric that is representative of a particular topology’s survivability with respect to distributed simultaneous link and node failures. We tune the accuracy of this metric having simulated the performance of each topology under a range of failure severities, and present the results. The topologies used are from national-scale backbone networks with a variety of characteristics, which we characterize using standard graph-theoretic metrics. The end result is a compensated total graph diversity metric that accurately predicts the survivability of a given network topology.     

Interconnecting networks with optimized service provisioning

Telecommunication Systems - A recent trend of peering at geo-diversified Internet exchange points (IXPs) has empowered decades-old proposal of inter-networking and opened up new avenues of business...     

Synthesis and Microwave Dielectric Properties of SrLa4−x Pr x Ti5O17 (0 ≤ x ≤ 4) Ceramics

Single-phase ceramics in the SrLa_4?x Pr _x La₄Ti₅O₁₇ (0 ≤ x ≤ 4) series were processed via a solid-state sintering route. X-ray diffraction analysis revealed single-phase ceramics for all the compositions. The molar volume (V _m) decreased while the theoretical density (ρ _th) increased with increase in the Pr content. Substitution of Pr³⁺ decreased the relative permittivity (ε _r) and temperature coefficient of resonant frequency (τ _f) due to its smaller ionic polarizability (α _d) and ionic radius than La³⁺. In the present study, ε _r ≈ 54.2, Q _u f ₀  ≈ 7935 GHz, and τ _f  ≈ ?20.3 ppm/°C were achieved for the composition with x = 2 (i.e., SrLa₂Pr₂Ti₅O₁₇).     

Digital signal propagation delay in a nano-circuit containing reactive and resistive elements

The transient switching delay in a micro/nano-scale circuit containing resistive and reactive elements are sternly affected by the surge in the resistance arising from sub-linear current-voltage (I-V) characteristics limited by the velocity and current saturation. The saturation arises due to the realignment of randomly oriented velocity vectors to the unidirectional streamlined ones in a high electric field when voltage applied across a resistor exceeds its decreasing critical value with reduced channel length. The frequency response f = 1/2πτ_t is affected by a transit time delay τ_t is lower than that predicted from the application of Ohm’s law. The resistance surge dramatically boosts the RC time constant and switching delay and attenuates the L/R time constant and switching delay.     

Least-Square Collaborative Beamforming Linear Array for Steering Capability in Green Wireless Sensor Networks

This paper presents a collaborative beamforming (CB) technique to organize the sensor node's location in a linear array for green wireless sensor network (WSN) applications. In this method, only selected clusters and active CB nodes are needed each time to perform CB in WSNs. The proposed least-square linear array (LSLA) manages to select nodes to perform as a linear antenna array (LAA), which is similar to and as outstanding as the conventional uniform linear array (ULA). The LSLA technique is also able to solve positioning error problems that exist in the random nodes deployment. The beampattern fluctuations have been analyzed due to the random positions of sensor nodes. Performances in terms of normalized power gains are given. It is demonstrated by a simulation that the proposed technique gives similar performances to the conventional ULA and at the same time exhibits lower complexity.     

Hybrid opto-digital signal processing in 112 Gbit/s DP-16QAM and DP-QDB transmission for long-haul large-$$\hbox {A}_\mathrm{eff}$$ pure-silica-core fiber links

In this work, we investigate the energy efficiency in optical code division multiplexing access (OCDMA) networks with forward error correction (FEC). We have modeled the energy efficiency considering the capacity of information transmitted and the network power consumption. The proposed network power consumption model considers the optical transmitter, receiver, optical amplifiers, FEC and network infrastructure as encoders, decoders, star coupler and network control in the overall optical power network consumption balance. Furthermore, an expression relating the signal-to-noise-plus-interference ratio gain for forward error correction with low-density parity-check code scheme considering the power consumption and bandwidth occupancy has been derived. Numerical results for OCDMA networks with aggregated FEC procedure have revealed the viability of the FEC deployment aiming to increase the overall energy efficiency of OCDMA networks.     

The effect of heat treatments on the properties of Ti/Pt heating elements for gas sensor applications

Ti/Pt as heating element for gas sensor applications was fabricated on silicon (Si) wafer substrate. The fabricated device was subjected to heat treatment at different prescribed time periods for thermal stability. The energy dispersion spectroscopy (EDS) results of the device indicated that there were no Ti traces on the Pt surface after heat treatment at 450 °C for 3 and 4 h in an argon (Ar) atmosphere. A maximum temperature coefficient of resistance (TCR) with a value of 2.88×10^?3 K^?1 was obtained for the device with 3 h heat treatment.     

An AWG based colorless WDM-PON with RZ-DPSK modulated downstream and re-modulation of DL signal for OOK upstream

We proposed an arrayed waveguide granting (AWG) based 10 Gbps full duplex wavelength division multiplexing passive optical network (WDM-PON) utilizing a retum-to-zero differential phase shift keying (R...     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.