Copper@ZIF-8 Core-Shell Nanowires for Reusable Antimicrobial Face Masks

SARS-CoV-2 and other respiratory viruses spread via aerosols generated by infected people. Face masks can limit transmission. However, widespread use of disposable masks consumes tremendous resources and generates waste. Here, a novel material for treating blown polypropylene filtration media used in medical-grade masks to impart antimicrobial activity is reported. To produce thin copper@ZIF-8 core-shell nanowires (Cu@ZIF-8 NWs), Cu NWs are stabilized using a pluronic F-127 block copolymer, followed by growth of ZIF-8 to obtain uniform core-shell structures. The Cu@ZIF-8 NWs are applied to filtration media by dip coating. Aerosol filtration efficiency decreases upon exposure to ethanol (solvent for dip-coating), but increases with addition of Cu@ZIF-8 NWs. Cu@ZIF-8 NWs shows enhanced antibacterial activity, compared to Cu NWs or ZIF-8 alone, against Streptococcus mutans and Escherichia coli. Antiviral activity against SARS-CoV-2 is assayed using virus-infected Vero E6 cells, demonstrating 55% inhibition of virus replication after 48 h by 1 µg of Cu@ZIF-8 NWs per well. Cu@ZIF-8 NWs’ cytotoxicity is tested against four cell lines, and their effect on inflammatory response in A549 cells is examined, demonstrating good biocompatibility. This low-cost, scalable synthesis and straightforward deposition of Cu@ZIF-8 NWs onto filter media has great potential to reduce disease transmission, resource consumption, and environmental impact of waste.     

Unleashing the Potential of Sodium-Ion Batteries: Current State and Future Directions for Sustainable Energy Storage

Rechargeable sodium-ion batteries (SIBs) are emerging as a viable alternative to lithium-ion battery (LIB) technology, as their raw materials are economical, geographically abundant (unlike lithium), and less toxic. The matured LIB technology contributes significantly to digital civilization, from mobile electronic devices to zero electric-vehicle emissions. However, with the increasing reliance on renewable energy sources and the anticipated integration of high-energy-density batteries into the grid, concerns have arisen regarding the sustainability of lithium due to its limited availability and consequent price escalations. In this context, SIBs have gained attention as a potential energy storage alternative, benefiting from the abundance of sodium and sharing electrochemical characteristics similar to LIBs. Furthermore, high-entropy chemistry has emerged as a new paradigm, promising to enhance energy density and accelerate advancements in battery technology to meet the growing energy demands. This review uncovers the fundamentals, current progress, and the views on the future of SIB technologies, with a discussion focused on the design of novel materials. The crucial factors, such as morphology, crystal defects, and doping, that can tune electrochemistry, which should inspire young researchers in battery technology to identify and work on challenging research problems, are also reviewed.     

A novel free space communication system using nonlinear InGaAsP microsystem resonators for enabling power-control toward smart cities

Wireless Networks - Nowadays, the smart grid has demonstrated a great ability to make life easier and more comfortable given recent advances. This paper studies the above issue from the perspective...     

Implication of molecular orientation on charge transport and gas sensing characteristics of cobalt–phthalocyanine thin films

Charge transport and gas sensing characteristics of cobalt phthalocyanine films deposited along (ATB) and perpendicular (PTB) to the natural twin boundaries of (0 0 1) LaAlO₃ substrate have been investigated. The charge carrier mobility of ATB films (∼5 cm² V⁻¹ s⁻¹) is five orders of magnitude higher compared to that of PTB films (∼7 × 10⁻⁵ cm² V⁻¹ s⁻¹), suggesting that twin boundaries acts like a template for ordering of molecules. The ATB films on exposure to ammonia showed a reversible increase of resistance, with fast response and recovery. In contrast PTB films showed same sensitivity, but exhibits base resistance drift along with sluggish response.     

Engineering New Microvascular Networks On-Chip: Ingredients,Assembly, and Best Practices

Tissue engineered grafts show great potential as regenerative implants for diseased or injured tissues within the human body. However, these grafts suffer from poor nutrient perfusion and waste transport, thus decreasing their viability post-transplantation. Graft vascularization is therefore a major area of focus within tissue engineering because biologically relevant conduits for nutrient and oxygen perfusion can improve viability post-implantation. Many researchers used microphysiological systems as testing platforms for potential grafts owing to an ability to integrate vascular networks as well as biological characteristics such as fluid perfusion, 3D architecture, compartmentalization of tissue-specific materials, and biophysical and biochemical cues. Although many methods of vascularizing these systems exist, microvascular self-assembly has great potential for bench-to-clinic translation as it relies on naturally occurring physiological events. In this review, the past decade of literature is highlighted, and the most important and tunable components yielding a self-assembled vascular network on chip are critically discussed: endothelial cell source, tissue-specific supporting cells, biomaterial scaffolds, biochemical cues, and biophysical forces. This paper discusses the bioengineered systems of angiogenesis, vasculogenesis, and lymphangiogenesis and includes a brief overview of multicellular systems. It concludes with future avenues of research to guide the next generation of vascularized microfluidic models.     

Adsorption kinetics and enhanced oil recovery by silica nanoparticles in sandstone

This study addresses adsorption kinetics of silica nanoparticles on sandstone mineral surfaces and Enhanced oil recovery (EOR) by nanoparticles. It was shown that nanoparticle adsorption on quartz which is the major constituent of sandstone reservoirs was best described as second order process. Both rate and equilibrium adsorption increases with salinity. However, salinity reduces Intraparticle diffusion while enhancing film diffusion. Spontaneous imbibition with nanoparticles dispersed in low salinity water showed higher incremental recovery which may be due to increased structural disjoining pressure. This was supported by surface forces analysis based on particle size and zeta potential measurements of the nanofluids.     

4D Printing of Shape Memory Materials for Textiles: Mechanism,Mathematical Modeling,and Challenges

Shape memory materials (SMMs) in 3D printing (3DP) technology garnered much attention due to their ability to respond to external stimuli, which direct this technology toward an emerging area of research, “4D printing (4DP) technology.” In contrast to classical 3D printed objects, the fourth dimension, time, allows printed objects to undergo significant changes in shape, size, or color when subjected to external stimuli. Highly precise and calibrated 4D materials, which can perform together to achieve robust 4D objects, are in great demand in various fields such as military applications, space suits, robotic systems, apparel, healthcare, sports, etc. This review, for the first time, to the best of the authors’ knowledge, focuses on recent advances in SMMs (e.g., polymers, metals, etc.) based wearable smart textiles and fashion goods. This review integrates the basic overview of 3DP technology, fabrication methods, the transition of 3DP to 4DP, the chemistry behind the fundamental working principles of 4D printed objects, materials selection for smart textiles and fashion goods. The central part summarizes the effect of major external stimuli on 4D textile materials followed by the major applications. Lastly, prospects and challenges are discussed, so that future researchers can continue the progress of this technology.     

Electrical properties of Ta/sub 2/O/sub 5/ gate dielectric on strained-Si

High dielectric constant (high-k) thin Ta/sub 2/O/sub 5/ films have been deposited on tensilely strained silicon (strained-Si) layers using a microwave plasma enhanced chemical vapour deposition technique at a low temperature. The deposited Ta/sub 2/O/sub 5/ films show good electrical properties as gate dielectrics and are suitable for microelectronic applications. The feasibility of integration of strained-Si and high-k dielectrics has been demonstrated.     

Design of Smart Door Closer System with Image Classification over WLAN

Wireless Personal Communications - A dual purpose system is presented in this paper which serves not only as a door closer, but is equally effective for surveillance purposes. The currently...     

Long Duration Persistent Photocurrent in 3 nm Thin Doped Indium Oxide for Integrated Light Sensing and In-Sensor Neuromorphic Computation

Miniaturization and energy consumption by computational systems remain major challenges to address. Optoelectronics based synaptic and light sensing provide an exciting platform for neuromorphic processing and vision applications offering several advantages. It is highly desirable to achieve single-element image sensors that allow reception of information and execution of in-memory computing processes while maintaining memory for much longer durations without the need for frequent electrical or optical rehearsals. In this work, ultra-thin (<3 nm) doped indium oxide (In₂O₃) layers are engineered to demonstrate a monolithic two-terminal ultraviolet (UV) sensing and processing system with long optical state retention operating at 50 mV. This endows features of several conductance states within the persistent photocurrent window that are harnessed to show learning capabilities and significantly reduce the number of rehearsals. The atomically thin sheets are implemented as a focal plane array (FPA) for UV spectrum based proof-of-concept vision system capable of pattern recognition and memorization required for imaging and detection applications. This integrated light sensing and memory system is deployed to illustrate capabilities for real-time, in-sensor memorization, and recognition tasks. This study provides an important template to engineer miniaturized and low operating voltage neuromorphic platforms across the light spectrum based on application demand.