A Genus-Wide Bioactivity Analysis of Daboia (Viperinae: Viperidae) Viper Venoms Reveals Widespread Variation in Haemotoxic Properties

The snake genus Daboia (Viperidae: Viperinae; Oppel, 1811) contains five species: D. deserti, D. mauritanica, and D. palaestinae, found in Afro-Arabia, and the Russell’s vipers D. russelii and D. siamensis, found in Asia. Russell’s vipers are responsible for a major proportion of the medically important snakebites that occur in the regions they inhabit, and their venoms are notorious for their coagulopathic effects. While widely documented, the extent of venom variation within the Russell’s vipers is poorly characterised, as is the venom activity of other species within the genus. In this study we investigated variation in the haemotoxic activity of Daboia using twelve venoms from all five species, including multiple variants of D. russelii, D. siamensis, and D. palaestinae. We tested the venoms on human plasma using thromboelastography, dose-response coagulometry analyses, and calibrated automated thrombography, and on human fibrinogen by thromboelastography and fibrinogen gels. We assessed activation of blood factors X and prothrombin by the venoms using fluorometry. Variation in venom activity was evident in all experiments. The Asian species D. russelii and D. siamensis and the African species D. mauritanica possessed procoagulant venom, while D. deserti and D. palaestinae were net-anticoagulant. Of the Russell’s vipers, the venom of D. siamensis from Myanmar was most toxic and D. russelli of Sri Lanka the least. Activation of both factor X and prothrombin was evident by all venoms, though at differential levels. Fibrinogenolytic activity varied extensively throughout the genus and followed no phylogenetic trends. This venom variability underpins one of the many challenges facing treatment of Daboia snakebite envenoming. Comprehensive analyses of available antivenoms in neutralising these variable venom activities are therefore of utmost importance.     

A Hybrid Modular Context-aware Services Adaptation for a Smart Living Room

Smart spaces have attracted considerable amount of interest over the past few years. The introduction of sensor networks, powerful electronics and communication infrastructures have helped a lot in the realization of smart homes. The main objective of smart homes is the automation of tasks that might be complex or tedious for inhabitants by distracting them from concentrating on setting and configuring home appliances. Such automation could improve comfort, energy savings, security, and tremendous benefits for elderly persons living alone or persons with disabilities. Context awareness is a key enabling feature for development of smart homes. It allows the automation task to be done proactively according to the inhabitant’s current context and in an unobtrusive and seamlessly manner. Although there are several works conducted for the development of smart homes with various technologies, in most cases, robust. However, the context-awareness aspect of services adaptation was not based on clear steps for context elements extraction (resp. clear definition of context). In this paper, we use the divide and conquer approach to master the complexity of automation task by proposing a hybrid modular system for context-aware services adaptation in a smart living room. We propose to use for the context-aware adaptation three techniques of machine learning, namely Naïve Bayes, fuzzy logic and case-based reasoning techniques according to their convenience.     

Tribological study of peroxide-cured EPDM rubber filled with electron beam irradiated PTFE powder

The aim of this work is the evaluation of the effects of electron beam modification of Polytetrafluoroethylene (PTFE) powder on the friction and wear properties of PTFE filled Ethylene-Propylene-Diene-Monomer (EPDM) rubber cured by a radical-initiated peroxide system. Friction and wear properties of EPDM vulcanizates were determined with the help of pin-on-disc tribometer in sliding contact with a steel-ball at room temperature without lubrication. PTFE powder was modified in atmospheric conditions with low (20 kGy) and high (500 kGy) irradiation doses using electron beam accelerator. The spectroscopic investigations reveal that the increasing concentration of reactive free radicals and functional groups with irradiation dose has a drastic influence on crosslinking efficiency due to their interference with peroxide radicals in curing process. As a result, non-irradiated and low-irradiated PTFE filled EPDM with higher crosslinking densities showed remarkably enhanced friction and wear properties. On the contrary, 500 kGy PTFE filled EPDM having significantly lower crosslinking density resulted in poor friction and wear characteristics. The apparent crosslinking density measured directly from the curing curves was found to be the most dominating parameter influencing friction, wear as well as the physical properties.     

Nanowires network for biomolecular detection using contactless impedance tomoscopy technique

Here we present the detection of ultralow concentrations of biomolecules in a device made from a polycarbonate membrane containing a network of gold nanowires and using a "contactless" impedance tomoscopy technique. The sensor comprises a thin dielectric layer with two parallel band electrodes on the one side and a microchannel containing gold nanowires onto which the adsorption of antibodies occurs. Upon applying a high-frequency ac voltage between the two electrodes, the adsorption process occurring at the surface of the gold nanowires can be followed through contactless impedance measurements. The configuration allows the real-time detection of biomolecules with a bulk concentration in the picomolar range.     

Enhanced magnetic field sensitivity of spin-dependent transport in cluster-assembled metallic nanostructures

The emerging field of spintronics explores the many possibilities offered by the prospect of using the spin of the electrons for fast, nanosized electronic devices. The effect of magnetization acting on a current is the essence of giant or tunnel magnetoresistance. Although such spintronics effects already find technological applications, much of the underlying physics remains to be explored. The aim of this article is to demonstrate the importance of spin mixing in metallic nanostructures. Here we show that magnetic clusters embedded in a metallic matrix exhibit a giant magnetic response of more than 500% at low temperature, using a recently developed thermoelectric measurement. This method eliminates the dominating resistivity component of the magnetic response and thus reveals an intrinsic spin-dependent process: the conduction-electron spin precession about the exchange field as the electron crosses the clusters, giving rise to a spin-mixing mechanism with strong field dependence. This effect appears sensibly only in the smallest clusters, that is, at the level of less than 100 atoms per cluster.     

Performance of a Nongasketed Flange Joint under Combined Internal Pressure and Bending Loading

Performance of a bolted flange joint is characterized mainly due to its “strength” and “sealing capability.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. A very limited amount of work is found in the literature under combined internal pressure and bending loading. Due to the ignorance of this external loading, i.e., bending loading, the optimized performance of the bolted flange joint cannot be achieved. The present design codes do not address the effects of bending loading on the structural integrity and sealing ability. To investigate joint strength and sealing capability under combined loading, an extensive comparative experimental and numerical study of a nongasketed flange joint is carried out and overall joint performance and behavior is discussed. Actual joint load capacity is determined under both the design and proof test pressure with maximum additional external bending loading that can be applied for safe joint performance. In addition, as experimentally it is impossible to test different flange joint sizes under combined loading application, hence finite element model developed and verified with the experimental results, presented in this paper can be used as base to study the behavior for different nongasketed flange joint sizes for different classes under combined pressure and bending loading.     

Methane ignition catalyzed by in situ generated palladium nanoparticles

Catalytic ignition of methane over the surfaces of freely-suspended and in situ generated palladium nanoparticles was investigated experimentally and numerically. The experiments were conducted in a laminar flow reactor. The palladium precursor was a compound (Pd(THD)₂, THD: 2,2,6,6-tetramethyl-3,5-heptanedione) dissolved in toluene and injected into the flow reactor as a fine aerosol, along with a methane–oxygen–nitrogen mixture. For experimental conditions chosen in this study, non-catalytic, homogeneous ignition was observed at a furnace temperature of ～1123 K, whereas ignition of the same mixture with the precursor was found to be ～973 K. In situ production of Pd/PdO nanoparticles was confirmed by scanning mobility, transmission electron microscopy and X-ray photoelectron spectroscopy analyses of particles collected at the reactor exit. The catalyst particle size distribution was log-normal. Depending on the precursor loading, the median diameter ranged from 10 to 30 nm. The mechanism behind catalytic ignition was examined using a combined gas-phase and gas-surface reaction model. Simulation results match the experiments closely and suggest that palladium nanocatalyst significantly shortens the ignition delay times of methane–air mixtures over a wide range of conditions.     

Food and nutrition security in the Hindu Kush Himalayan region

The status of food and nutrition security and its underlying factors in the Hindu‐Kush Himalayan (HKH) region is investigated. In this region, one third to a half of children (<5 years of age) suffer from stunting, with the incidence of wasting and under‐weight also being very high. The prevalence of stunting, wasting and under‐weight in children is particularly high in some mountain areas such as Meghalaya state in India, the western mountains and far‐western hills of Nepal, Balochistan province in Pakistan, eastern Afghanistan, and Chin state in Myanmar. Food habits in the HKH region are changing. This has led to a deterioration in traditional mountain food systems with a decline in agrobiodiversity. Factors such as high poverty and low dietary energy intakes, a lack of hygienic environments, inadequate nutritional knowledge, and climate change and environmental degradation are also influencing food and nutrition security in the HKH region. To achieve sustainable food and nutrition security in the mountains, this study suggests a multi‐sectoral integrated approach with consideration of nutritional aspects in all development processes dealing with economic, social, agricultural and public health issues. © 2017 Society of Chemical Industry     

Microstructure Characterization and Corrosion Resistance Behavior of New Cobalt-Free Maraging Steel Produced Through ESR Techniques

In this study, two different grades (M23 and M29) of cobalt-free low nickel maraging steel have been produced through electroslag remelting (ESR) process. The corrosion resistance of these ESR steels was investigated in 1 M H₂SO₄ solution using linear potentiodynamic polarization (LPP) and electrochemical impedance spectroscopy (EIS) techniques. The experiments were performed for different immersion time and solution temperature. To evaluate the corrosion resistance of the ESR steels, some significant characterization parameters from LPP and EIS curves were analyzed and compared with that of conventional C250 maraging steel. Irrespective of measurement techniques used, the results show that the corrosion resistance of the ESR steels was higher than the C250 steel. The microstructure of ESR steels was composed of uniform and well-distributed martensite accompanied with little amount of retained austenite in comparison with C250 steel.     

Effect of different softeners and sanforising treatment on pilling performance of polyester/viscose blended fabrics

An 80:20 polyester/viscose blended woven fabric was subjected to different softening and sanforising treatments. The effect of different softeners and sanforising treatments on the pilling propensity of the fabric was investigated. It was found that, while some types of softeners had no effect on pilling, the others may result in extreme deterioration of the pilling performance of polyester/viscose blended fabrics. It was further found that, in all cases, sanforising after softening adversely affects the fabric pilling performance.