Removal of Ce(IV) and Nd(III) from Acidic Solution Using Polyacrylonitrile-Encapsulated Lithium Titanium Vanadate as an Efficient Adsorbent

Journal of Inorganic and Organometallic Polymers and Materials - In the present study, polyacrylonitrile was grafted onto lithium titanium vanadate (LTV) to form a lithium titanium...     

Microwave irradiated and thermally heated olive stone activated carbon for nickel adsorption from synthetic wastewater: A comparative study

In attempt to compare the removal efficiency and yield of the activated carbon prepared using the conventional and microwave‐assisted heating is the focus of this work. Toward this olive stone (a biomass precursor) is activated using the popular activating agent potassium hydroxide. The process optimization exercise is carried out by using the standard full factorial statistical design of experiments (response surface methodology). The activated carbons prepared under the optimized conditions are compared based on the adsorption capacity and yield. The adsorption capacity was found higher using microwave heating as compared with conventional heating. The microwave heating requires significantly lesser holding time as compared to conventional heating method to produce activated carbon of comparable quality, with higher yield. The BET surface area of carbon using microwave heating is significantly higher than the conventional heating. Although the mesopore surface area of carbon is not vary significantly, the activation time, power, and nitrogen gas consumption are significantly lower than the conventional heating rendering that the activation process via microwave is more economical than that via conventional heating. The adsorption isotherm data fitted the Langmuir isotherm well and the monolayer adsorption capacity was found to be 12.0 and 8.42 mg/g for microwave and thermally heated activated carbon, respectively. Regeneration studies showed that microwave‐irradiated and thermally heated olive stone could be used several times by desorption with an HCl reagent. Both carbons can be used for the efficient removal of Ni²⁺ (>99%) from contaminated wastewater. © 2013 American Institute of Chemical Engineers AIChE J, 60: 237–250, 2014     

Study of the microbial diversity and antimicrobial properties of Irish edible brown seaweeds

Brown Irish edible seaweeds, Himanthalia elongata, Laminaria sachharina and Laminaria digitata, were evaluated for the microbiota in raw and heat processed form. Raw seaweeds showed complete absence of aerobic mesophiles, halophiles, yeasts and molds. However, heating at 85 °C for 15 min resulted in spore germination. Bacterial counts as high as 10⁷ were observed for aerobic mesophiles and halophiles. Heating above 95 °C for 15 min resulted in complete inactivation of surface microflora. Bacteria belonging to Bacillaceae, Paenibacillaceae, Moraxellaceae and Enterobacteriaceae family were identified by 16S rRNA sequencing. In vitro antimicrobial activity of the methanolic extracts of the seaweed on food pathogenic and food spoilage bacteria were also evaluated. The seaweeds in their raw state had almost 100% inhibition against Listeria monocytogenes; 98% and 93% inhibition was achieved against Pseudomonas aeruginosa by H. elongata and L. saccharina extracts, respectively. Heating the seaweeds resulted in the reduction of antimicrobial activity as compared to raw. The effect was more pronounced against Gram negative bacteria.     

Civil Liabilities for Unsafe Foods in Bangladesh and Australia: A Comparative Perspective on Consumer Protection

The statutory laws concerning food safety, which allow the consumers affected by unsafe foods to claim compensation for their loss or damage in Bangladesh, are flawed in several respects. These flaws are argued to have harmful impacts on consumer protection. The ineffective legislation in the absence of application of the common law principles of negligence has left the consumers virtually helpless in securing remedies for their injuries. This article endeavors to critically examine the ambiguities and shortcomings in the Consumer Rights Protection Act 2009 (Bangladesh) looking through the prisms of the Australian Consumer Law 2010 and relevant case law from major common law jurisdictions. It discovers a number of weaknesses in the legislation of Bangladesh and provides specific suggestions for strengthening the civil liability provisions from the perspective of consumer protection by preventing their contraventions and providing adequate compensation.     

Sustainability of Groundwater Resources in the North-Eastern Region of Bangladesh

Water is essential for economic, social, and environmental development. Global water resources are vulnerable due to increasing demand related to population growth, pollution potential, and climate change. Competition for water between different sectors is increasing. To meet the increasing demand, the use of groundwater is increasing worldwide. In this paper, the water-table dynamics of the north-eastern region of Bangladesh were studied using the MEKESENS software. This study reveals that the depth to water-table (WT) of almost all the wells is declining slowly. In many cases, the depth will approximately double by the year 2040, and almost all will double by 2060, if the present trend continues. If the decline of the water-table is allowed to continue in the long run, the result could be a serious threat to the ecology and to the sustainability of food production, which is vital for the nation’s food security. Therefore, necessary measures should be taken to sustain water resources and thereby agricultural production. Demand-side management of water and the development of alternative surface water sources seem to be viable strategies for the area. These strategies could be employed to reduce pressure on groundwater and thus maintain the sustainability of the resource.     

Performance Analysis of Prefix Delegation-Based Route Optimization Schemes: Effects of Increasing the Number of Nodes

Prefix delegation-based schemes have been proposed to solve the route optimization problem in NEtwork MObility where multiple IP-enabled hosts move together as a mobile network. Differences in the route optimization for hosts at the cost of increased signaling will result in performance difference of the schemes depending on parameters, such as speed of the mobile network, its distance from the home network (the network to which mobile network usually belongs), and the number of hosts in the mobile network. Although the effects of the first two parameters on the performance of the schemes have been studied, effects of increasing the number of hosts have not been studied. Therefore, there is a need to evaluate performance when the number of hosts is increased. We perform the evaluation through ns-2 simulation. Results show that the performance superiority achieved by the hosts?? route optimization is only affected by the distance significantly only when the number of hosts is small. The results will help to decide when to use the route optimization for hosts depending on the values of the parameters.     

An efficient extraction and clean‐up procedure for pesticide determination in olive oil

This work reports a simple, rapid, and effective extraction method based on liquid–liquid extraction (LLE) followed by matrix solid‐phase dispersion‐sonication for detection, identification and quantification of multiclass pesticides in virgin olive oil using liquid chromatography mass spectrometry (LC‐QTOF‐MS). LLE to extract pesticide residues in virgin olive oil was performed in order to study the centrifugation efficiency to obtain high recovery yield and low co‐extract fat residue in the final extract. Different suitable parameters of MSPD procedure were evaluated, such as nature of dispersing phase, clean‐up adsorbent, and volume of eluting solvent (acetonitrile) in different extraction conditions, with or without sonication. The best results were obtained using 5 g of virgin olive oil, 2 g of PSA as dispersant sorbent, 2 g of Florisil/GCB (70:30 w/w) as clean‐up sorbent, and 15 mL of acetonitrile as eluting solvent under conditions of 15 min ultrasonic bath at RT. Method validation was performed in order to study sensitivity, linearity, precision, and accuracy. Average recoveries ranged between 73.7 and 104.2% with relative SDs 5.3–13.4% at three concentration levels (25, 50, and 100 µg/kg). Detection and quantification limits ranged from 1.5 to 5 µg/kg and 3 to 9 µg/kg, respectively.     

Physicochemical and sensory characteristics of no‐bake wheat–soy snack bars

BACKGROUND: Health and wellness is a trend observed throughout ready‐to‐eat cereals, cereal health bars. Therefore, the main objectives of this research were to produce a low cost, acceptable, nutritious and healthy wheat‐ and soy‐based bar under no‐bake conditions. Also, the physical, chemical, microbial, acceptability and the nutritional value of this product were studied. Six different bars were produced: a wheat bar (WB), a wheat bar with coating (WBC), a wheat and soy bar with coating (WSBC), a soy bar with coating (SBC), a wheat bar with 3% glycerin (WB3%), and a wheat bar with 6% glycerine (WB6%). RESULTS: WB and WBC had the highest water activities while WSBC had the lowest. The three bars with coating had higher L and lower b values, which indicates that they were lighter and not as highly yellow coloured as the wheat samples. WSBC had the lowest value for hardness while the SBC and WBC had the highest. SBC received the highest scores for overall acceptability, appearance, sweetness, flavour and texture while WSBC received the second highest score in all categories. CONCLUSION: It appears that consumers prefer the soy varieties to the wheat bars. These types of bars can aid in feeding the general population, which is becoming increasingly concerned with nutrition and convenience. Copyright © 2010 Society of Chemical Industry     

Copolymerization of carbon monoxide with exo‐methylenecycloalkane and dienes: synthesis of functionalized aliphatic polyketones

Synthesis of functional aliphatic polyketones was achieved by co‐ and terpolymerization of the strained exo‐methylenecycloalkane, methylenecyclopropane (MCP), and also the dienes 1,5‐hexadiene, 1,7‐octadiene and 1,6‐heptadien‐4‐ol, with carbon monoxide and propene, using the dicationic palladium(II) phosphine complex [Pd(dppp) (NCCH₃)₂](BF₄)₂ (I) (dppp is 1,3‐bis(diphenyl‐phosphino)propane) as the catalyst precursor. The resulting MCP/CO copolymer contains both ring‐opened and cyclic microstructures. Ring‐opening copolymerization yields exo‐methylene functionalized polyketone. In contrast to hexadiene/carbon monoxide copolymer (Hx/CO), no ring structures were observed in the alternating octadiene/carbon monoxide (Oc/CO) and heptadien‐4‐ol/carbon monoxide (Hp‐ol/CO) copolymers. The remaining double bonds were left intact to yield polymers with olefinic functionalities in the side chains. © 2001 Society of Chemical Industry     

Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V

The effects of postweld heat treatment (PWHT) on 3.2-mm- and 5.1-mm-thick Ti-6Al-4V butt joints welded using a continuous wave (CW) 4-kW Nd:YAG laser welding machine were investigated in terms of microstructural transformations, welding defects, and hardness, as well as global and local tensile properties. Two postweld heat treatments, i.e., stress-relief annealing (SRA) and solution heat treatment followed by aging (STA), were performed and the weld qualities were compared with the as-welded condition. A digital image correlation technique was used to determine the global tensile behavior for the transverse welding samples. The local tensile properties including yield strength and maximum strain were determined, for the first time, for the laser-welded Ti-6Al-4V. The mechanical properties, including hardness and the global and local tensile properties, were correlated to the microstructure and defects in the as-welded, SRA, and STA conditions.