Optimized Reliable Hybrid Routing Protocol Based Link Stability for Mobile Wireless Networks

Wireless Personal Communications - During the last two decades, there has been a tremendous growth in the use of MANETs, not only due to the development of the technology but also due to their high...     

Cache modeling and optimization for portable devices running MPEG-4 video decoder

There are increasing demands on portable communication devices to run multimedia applications. ISO (an International Organization for Standardization) standard MPEG-4 is an important and demanding multimedia application. To satisfy the growing consumer demands, more functions are added to support MPEG-4 video applications. With improved CPU speed, memory sub-system deficiency is the major barrier to improving the system performance. Studies show that there is sufficient reuse of values for caching that significantly reduce the memory bandwidth requirement for video data. Software decoding of MPEG-4 video data generates much more cache-memory traffic than required. Proper understanding of the decoding algorithm and the composition of its data set is obvious to improve the performance of such a system. The focus of this paper is cache modeling and optimization for portable communication devices running MPEG-4 video decoding algorithm. The architecture we simulate includes a digital signal processor (DSP) for running the MPEG-4 decoding algorithm and a memory system with two levels of caches. We use VisualSim and Cachegrind simulation tools to optimize cache sizes, levels of associativity, and cache levels for a portable device decoding MPEG-4 video. Abu Asaduzzaman is, currently, a PhD candidate in the department of Computer Science and Engineering (CSE), Florida Atlantic University (FAU), Boca Raton, Florida. He received his MS degree in computer engineering from FAU in 1997. Mr. Asaduzzaman worked for ECI Telecom as a software engineer from 1998 to 2001. From 2001 to 2003, he worked for BlueCross and BlueShield of Florida and SunPass (FDoT) as an IT Consultant. Currently, he is working as a research assistant at CSE Dept, FAU. His research interests include cache optimization, architecture exploration, embedded system evaluation, and networks-on-a-chip (NoC). He has published several research papers in these areas. Abu is a member of the honor society of Phi Kappa Phi, Tau Beta Pi, Upsilon Phi Epsilon, and the Association for Computing Machinery (ACM) FAU Chapter. Imad Mahgoub received the MS degree in applied mathematics and MS degree in electrical and computer engineering, both from North Carolina State University, Raleigh in 1983 and 1986 respectively and the PhD degree in computer engineering from the Pennsylvania State University, University Park, PA in 1989. Dr. Mahgoub joined Florida Atlantic University (FAU), Boca Raton, Florida in 1989. Currently he is a full professor of Computer Science and Engineering department and the director of the Mobile Computing Laboratory. His research interests include performance evaluation, mobile computing, sensor networks, and parallel and distributed processing. He has published over 80 research papers in these areas. He is the co-editor of the Mobile Computing Handbook and the Handbook of Sensor Networks. Dr. Mahgoub has served on the program committees of numerous conferences. He has been the vice-chair for the Symposium on Performance Evaluation of Computer and Telecommunication Systems (SPECTS) since 2003. He is a senior member of the IEEE. He is also a member of Tau Beta Pi, Upsilon Pi Epsilon, the IEEE Computer Society, and the ACM.     

Distribution of sulphate reducing bacteria in oil emulsion and its relationship to aeration and swarf

Intermittent aeration of cutting oil emulsion was shown to reduce but not eliminate sulphate reducing bacteria (srb). Removing iron swarf from infected cutting fluid markedly reduced the numbers of srb detected in the fluid, and prevented the characteristic grey spoilage which these organisms promote. It was shown that large numbers of srb are in fact adherent to the metal surfaces.     

Intrinsic reactivity of carbons to oxygen

The analysis of carbon oxidation data presented in a previous Fuel paper is shown to contain an error, as a result of which the intrinsic reactivity of carbon to oxygen is under-estimated by a factor of between one and four.     

Power Law Velocity Profile in Fully Developed Turbulent Pipe and Channel Flows

The power law velocity profile has been analyzed in terms of the envelope of the friction factor which gives the friction factor log law. The power law index α and prefactor C are shown as the function of the friction Reynolds number, as well as the function of the alternate variable the nondimensional friction velocity. The fully developed turbulent superpipe flow data of McKeon et al. and fully developed channel flow data of Zanoun et al. have been analyzed and the power law index α and prefactor C data have been estimated, first as a function of the friction Reynolds number and second as function of the nondimensional friction velocity. Based on analysis, several correlations have been proposed that have been supported by the data.     

Characteristics of the medical waste generated at the Jordanian hospitals

Recently, Jordan has witnessed increased amounts of medical waste generated at different healthcare facilities. This has resulted in issuance of Medical Waste Regulation that aimed at regulating the management processes of such hazardous waste. To provide information on medical waste generation rates, composition and statistical characteristics, a comprehensive sampling survey was initiated after a regulatory definition of the medical waste was established. Hospitals from Public, private and educational categories were covered by the survey. This paper presents the findings of the survey. The average generation rates ranged from 0.29 to 1.36 kg/bed/day, while in terms of patient numbers it is from 0.36 to 0.87 kg/patient/day. The total daily amount of medical waste generated at the Jordanian hospitals was estimated to be 6 tones/day. The daily amounts of medical waste generated at King Abdullah University Hospital were found to follow a log normal probability distribution. Physical composition analysis of the medical waste, which conducted based on the categories identified by the Jordanian Regulation, indicated that the infectious waste category is the highest, followed by sharps category and finally pathological, cytotoxic and pharmaceutical categories were the lowest. The study concluded that all hospitals covered by the survey are practicing segregation of hazardous medical waste from general medical waste. However, the segregation process in some hospitals is still inefficient and there is a potential for improvements toward minimizing the hazardous medical waste generation.     

Development of a novel nanocomposite consisting of 3-(4-methoxyphenyl)propionic acid and magnesium layered hydroxide for controlled-release formulation

ABSTRACT

Magnesium layered hydroxide (MLH) intercalated with anionic 3-(4-methoxyphenyl)propionic acid (MPP) was synthesised by a direct reaction method using magnesium oxide and MPP as precursors. A further coating of chitosan was applied on the external surface of MLH–MPP nanocomposite to form a new material, named MLH–MPP/chitosan nanocomposite. The XRD pattern showed an intense and sharp peak at basal spacing 18.9 Å, proving that MPP anions were successfully intercalated into the interlayer gallery of MLH in a monolayer arrangement. The XRD pattern of the MLH–MPP/chitosan nanocomposite shows similar peaks with the MLH–MPP nanocomposite. The result was also supported by FTIR spectra and elemental analysis. TGA/DTG spectra showed that the thermal stabilities of the guest anion in the both nanocomposites were markedly enhanced. A controlled-release study of the MPP ion from the MLH–MPP/chitosan nanocomposite showed a slower release compared to MLH–MPP nanocomposite with an initial rapid release and slow release thereafter. Meanwhile, the release behaviours of MPP ions from both nanocomposites were governed by pseudo-second order kinetics. This result highlights the potential of the nanocomposite as an encapsulated material for the controlled-release formulation of MPP anions.     

An Empirical Study of Factors Affecting e-Commerce Adoption among Small- and Medium-Sized Enterprises in a Developing Country: Evidence from Malaysia

The purpose of this paper is to empirically examine determinants of e-commerce adoption among Malaysian small- and medium-sized enterprises (SMEs). This study tested eight hypotheses on determinants affecting e-commerce adoption with empirical data from several survey instruments: an online questionnaire-based survey, mailed survey and questionnaire collected in-person from a sample of 307 SMEs in Malaysia. The findings show that e-commerce adoption within Malaysian SMEs is affected by perceived relative advantage, perceived compatibility, managers/owner's knowledge and expertise, management characteristics and external change agents. This study contributes to enhancing the understanding of the determinants of adopting e-commerce in SMEs and provides some interesting perspective from Malaysia. Those parties interested in promoting their business online may find these results helpful in guiding their efforts.     

Generative regular-freeform surface recognition for generating material removal volume from stock model

The present paper illustrates the development of generative surface recognition for regular and freeform. To obtain the final form of product, material removal volume generation from a stock model is also discussed. Only a few studies integrated the regular and freeform surfaces to provide a comprehensive definition of surface recognition as well as for the volumetric estimation of removal material in finishing and roughing operations. The current research deploys a comprehensive surface recognition approach that can recognise both regular and freeform surfaces based on the geometry as well as loop entity of a face. In contrast to the regular surface that can be categorised into a particular group of geometrical shape, such as cylindrical shape, the proposed approach enables the recognition of a freeform surface that cannot be defined as a generic geometrical shape. In addition, the new method also simplifies the existing surface recognition for regular surfaces. The material removal volumes created consist of machining volumes for finishing and roughing operations needed to be machined to obtain the final form of the product. The present research provides a unique user customisation feature that enables user to specify the volumetric thickness for material removal volume in the finishing operation as well as the size for the stock model. These estimated volumes are prepared for subsequent manufacturing applications, such as sequencing of machining operation.     

A novel folded-torus based network architecture for power-aware multicore systems

Multicore computers are expected to be used to process a higher volume of data in the future. Current mesh-like multicore architecture is inadequate to increase memory-level-parallelism because of its poor core-to-core interconnection topology. In some architecture, each node has communication and computation components – switching component of such a node consumes power while the node is only computing and vice versa. In this paper, we propose a folded-torus based topology to improve performance and energy saving. In this architecture, nodes are separated between network switches and computing cores. Using folded-torus concept, we develop a scheme to connect the components (switches and cores) of a multicore architecture. Experimental results show that the proposed architecture outperforms Raw Architecture Workstation (RAW), Triplet Based Architecture (TriBA), and Logic-Based Distributed Routing (LBDR) architecture by reducing the switches more than 53%, the power consumption by up to 71%, and the average delay by up to 58%.