Randomness versus Fault-Tolerance

We investigate the relations between two major properties of multiparty protocols: fault tolerance (or resilience ) and randomness . Fault-tolerance is measured in terms of the maximum number of colluding faulty parties, t , that a protocol can withstand and still maintain the privacy of the inputs and the correctness of the outputs (of the honest parties). Randomness is measured in terms of the total number of random bits needed by the parties in order to execute the protocol. Previously, the upper bound on the amount of randomness required by general constructions for securely computing any nontrivial function f was polynomial both in n , the total number of parties, and the circuit-size C(f) . This was the state of knowledge even for the special case t=1 (i.e., when there is at most one faulty party). In this paper we show that for any linear-size circuit, and for any number t < n/3 of faulty Received 30 April 1998 and revised 3 January 1999 and 1 July 1999     

Sorption of the pharmaceuticals carbamazepine and naproxen to dissolved organic matter: Role of structural fractions

Pharmaceutical compounds and dissolved organic matter (DOM) are co-introduced into the environment by irrigation with reclaimed wastewater and/or application of biosolids. In this study, we evaluate the role and mechanism of interaction of the pharmaceuticals naproxen and carbamazepine with structural fractions of biosolids-derived DOM. Sorption interactions were estimated from dialysis-bag experiments at different pHs.Sorption of naproxen and carbamazepine by the hydrophobic acid fraction exhibited strong pH-dependence. With both pharmaceuticals, the highest sorption coefficients (K_DOC) were at pH 4. With the hydrophobic neutral fraction, pH affected only naproxen sorption (decreasing with increasing pH). Among the hydrophilic DOM fractions, the hydrophilic acid fraction exhibited the highest K_DOC value for carbamazepine, probably due to their bipolar character. In the hydrophilic acid fraction-naproxen system, significant anionic repulsion was observed with increasing pH. The hydrophilic base fraction contains positively charged functional groups. Therefore with increasing ionization of naproxen (with increasing pH), K_DOC to this fraction increased. The hydrophilic neutral fraction exhibited the lowest K_DOC with both studied pharmaceuticals.The K_DOC value of carbamazepine with the bulk DOM sample was higher than the calculated K_DOC value based on sorption by the individual isolated fractions. The opposite trend was observed with naproxen at pH 8: the calculated K_DOC value was higher than the value obtained for the bulk DOM. These results demonstrate that DOM fractions interact with each other and do not act as separate sorption domains.     

Failure Analysis of Seawater Inlet Pipe

A seawater inlet pipe failed in service. The visual examination showed that the backing bar was present inside the pipe and the failure was characterized by leaks at approximately 4–8 o’clock position near that backing bar. The finite element analysis of fluid in the seawater inlet pipe showed that the eddy zone was formed near the backing bar. The leaks and crater-like surfaces were noticed on the inner pipe surface at which the finite element analysis modeled the possibility of the formation of eddy zone.     

Simultaneous optimal integration of water utilization and heat exchange networks using holistic mathematical programming

A systematic holistic mathematical programming (HMP) is proposed to formulate a mixed integer nonlinear programming (MINLP) model for one-step optimization of water-allocation and heat exchange network (WAHEN) designs with single- or multi-contaminant water streams. The proposed model formulation and solution strategy are believed to be superior to the available ones in the following aspects. First, a comprehensive representation combining two separate superstructures is adopted to capture the structural characteristics of the integrated WAHEN. Then, a hybrid optimization strategy integrating stochastic and deterministic components is developed for the resulting MINLP model and, also, an interactive iteration method is adopted based on sensitivity analysis to guide the search toward a potential global optimum. Finally, evolutionary strategies and manipulations are executed to enhance WAHEN configurations. Two illustrative examples are presented to demonstrate the validity and advantages of the proposed approach.     

Perceptual audio data concealment and watermarking scheme using direct frequency domain substitution

A method is described for perceptually transparent data concealment and watermarking in audio. The proposed system replaces redundant and imperceptible frequency components with hidden data. A psychoacoustic model is used to identify suitable frequency locations for data hiding. Such a method is complicated by the windowing and overlapping requirements used for signal conditioning. The proposed system uses data flipping in place of windowing and incorporates a novel data detection scheme with adaptive weighting to increase the robustness of the watermark transmission. The resistance of the watermarking system to filtering, amplitude scaling and additive white noise is measured and results presented.     

Improved controller for power conditioner using high-temperature superconducting magnetic energy storage (HTS-SMES)

One of the most important functions in a superconducting magnetic energy storage (SMES) system when used for power conditioning, is the ability to charge the super-conducting coil as fast as possible to ensure that it is ready when it is next required. This paper describes a novel controller for a high-temperature SMES (HTS-SMES) that can ensure: 1) fast return of energy to the superconducting coil under constant-current mode and 2) a constant and sinusoidal input supply current irrespective of the varying load demand with and without harmonics. In the new HTS-SMES proposed, two hysteresis controllers are used, one to control the magnitude, phase and the waveform of the ac supply current, and the other is to control a dc chopper to regulate the SMES coil current. The first hysteresis controller ensures that as far as the power utility is concerned, the load appears to the utility system as a constant sinusoidal load with unity power factor irrespective whether the load is distorted or varying in nature. The second hysteresis controller has been designed to regulate the energy in and out of the superconducting coil. A special feature of this controller is its ability to smoothly charge the superconducting coil using constant current charging so that it can be ready for the next discharging operation as soon as possible. Analysis of the circuit operation under hysteresis control is presented in details. Simulation and experimental results are presented demonstrating the feasibility of the proposed power conditioning system.     

Beyond plain weave fabrics – I. Geometrical model

In response to the large variety of weaving styles offered by the textile industry, a new general approach for the geometrical modeling of 2D biaxial orthogonal woven fabric reinforcements for composite materials is proposed here. New geometrical parameters are introduced in order to describe general families of twill and satin woven patterns, and a new classification of woven fabrics is proposed based on these parameters. Generation of the 3D internal geometry of the woven fabric families is achieved based on new geometrical functions that consider the actual configuration of the composite material in all its complexity. The proposed geometrical model is intended as the foundation for further analytical or numerical modeling of the mechanical properties of the composite materials reinforced with these fabrics.     

Solid-state photoelectrochemical device based on poly(3-hexylthiophene) and an ion conducting polymer electrolyte, amorphous poly(ethylene oxide) complexed with I3/I redox couple

The photoelectrochemical properties of a solid-state photoelectrochemical cell (PEC) based on poly(3-hexylthiophene), P3HT, and an ion-conducting polymer electrolyte, amorphous poly(ethylene oxide), POMOE, complexed with I₃⁻/I⁻ redox couple has been constructed and studied. The current–voltage characteristics in the dark and under white light illumination, transient photocurrent and photovoltage studies, photocurrent action spectra for front and back side illuminations and an open-circuit voltage and short-circuit current dependence on light intensity have been studied. An open-circuit voltage of 130 mV and a short-circuit current of 0.47 μA cm⁻² were obtained at light intensity of 100 mW/cm². IPCE% of 0.024% for front side illumination (ITO/PEDOT) and IPCE% of 0.003% for backside illumination (ITO/P3HT) were obtained.     

The use of experimental design to study the responses of continuous devulcanization processes

This paper presents the use of statistical analysis for studying the responses of two continuous devulcanization processes (of the EPDM roofing sheet and the EPDM profile) in the extruder. The response is represented by the reaction conversion, which is denoted as the relative decrease in crosslink density. Experimental design is considered as a useful tool when the kinetic data for the physical modeling are not available. The models derived show similar tendency of both processes with respect to the temperature and the screw speed. A difference is observed in their responses to the feed rate, which might be the consequence of their different devulcanization rates. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5028–5038, 2006