An Effective Power-Aware At-Speed Test Methodology for IP Qualification and Characterization

Advanced nanometer technologies have led to a drastic increase in operational frequencies resulting in the performance of circuits becoming increasingly vulnerable to timing variations. The increasing process spread in advanced nanometer nodes poses considerable challenges in predicting post-fabrication silicon performance from timing models. Thus, there is a great need to qualify basic building structures on silicon in terms of critical parameters before they could be integrated within a complex System-on-Chip (SoC). The work of this paper presents a configurable circuit and an associated power-aware at-speed test methodology for the purpose of qualifying basic standard cells and complex IP structures to detect the presence of timing faults. Our design has been embedded within test-chips used for the development of the 28 nm Fully Depleted Silicon On Insulator (FD-SOI) technology node. The relevant silicon results and analysis validate the proposed power-aware test methodology for qualification and characterization of IPs and provide deeper insights for process improvements.     

Thermoelectric and Magnetic Properties of Pt-Substituted $${BaFe_{4-{x}}Pt_{{x}}Sb_{12}}$$ Compounds

\({BaFe_{4-{x}}Pt_{{x}}Sb_{12}}\) (x = 0, 0.1, 0.2) compounds were prepared by melting and annealing, followed by a spark plasma sintering method. Low-temperature thermoelectric and magnetic properties were investigated based on Seebeck coefficient, electrical and thermal conductivity and magnetization measurements. The structural properties of \({BaFe_{4-{x}}Pt_{{x}}Sb_{12}}\) (x = 0, 0.1, 0.2) compounds were ascertained by powder x-ray diffraction analysis, confirming that all samples have a main phase of a skutterudite structure with the space group Im\({\mathrm {\bar{3}}}\). The lattice parameters obtained, 9.202(5), 9.199(5) and 9.202(1) Å for x = 0, 0.1 and 0.2, respectively, were found consistent with literature. The Seebeck coefficient sign shows that holes are dominant carriers in all compounds. The local maximum Seebeck coefficient was observed around 50 K which may be a trace of paramagnon-drag effect of charge carriers. Thermal conductivity and electrical resistivity measurements were carried out between 4.2 and 300 K. Temperature dependence of electrical resistivity reflects that all samples show semi-metallic behavior in our temperature range of 4.2–300 K. Samples for x = 0.1 and x = 0.2 show Kondo-like behavior. In magnetization measurement, we observe that there are two successive magnetic transitions in Pt-substituted compounds; however, there is only one (transition from a paramagnetic state to long-range magnetic ordering) in Pt-free compounds. In Pt-substituted compounds, the first transition appears at \( T _{ {\rm c}}\) = 48 K. In addition, the second transition is observed at \( T _{ {\rm irr}}\) = 30 K where an intermediate state is observed before the magnetic ordering transforms to an irreversible ferromagnetic state. We concluded that Pt substitution on the Fe side effectual on the thermoelectric and magnetic properties of \({BaFe_{4-{x}}Pt_{{x}}Sb_{12}}\) (x = 0, 0.1, 0.2) compounds.     

Noise Figure Reduction in Externally Modulated Analog Fiber-Optic Links

An octave-bandwidth microwave photonic link with a third-order limited spurious-free dynamic range of 121 dB in a 1-Hz bandwidth has been demonstrated. The link noise figure of 9 dB at a modulation frequency of 2 GHz was achieved by using a bias-shifted Mach-Zehnder modulator with an optical input power of 500 mW. This level of performance was realized without electronic or optical linearization     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Serendipitous Identification of a Covalent Activator of Liver Pyruvate Kinase

Enzymes are effective biological catalysts that accelerate almost all metabolic reactions in living organisms. Synthetic modulators of enzymes are useful tools for the study of enzymatic reactions and can provide starting points for the design of new drugs. Here, we report on the discovery of a class of biologically active compounds that covalently modifies lysine residues in human liver pyruvate kinase (PKL), leading to allosteric activation of the enzyme (EC₅₀=0.29 μM). Surprisingly, the allosteric activation control point resides on the lysine residue K282 present in the catalytic site of PKL. These findings were confirmed by structural data, MS/MS experiments, and molecular modelling studies. Altogether, our study provides a molecular basis for the activation mechanism and establishes a framework for further development of human liver pyruvate kinase covalent activators.     

Combining molecular imprinted nanoparticles with surface plasmon resonance nanosensor for chloramphenicol detection in honey

The focus of this article is to develop a surface plasmon resonance (SPR) nanosensor to determine chloramphenicol (CAP) using the molecularly imprinted nanoparticles. The CAP imprinted nanoparticles were prepared by miniemulsion polymerization method. Then, the nanoparticles were attached onto the SPR nanosensor surface via temperature‐controlled evaporation. Surface characterization studies were performed with atomic force microscopy and contact angle measurements. Kinetic studies were performed with CAP solutions in the concentration range of 0.155–6.192 nM. Florphenicol (FLP) and thiamphenicol (TAP) having similar chemical structures to the template (i.e., CAP) were chosen as competitors to determine selectivity of the nanoparticles. Selectivity constants were observed as 8.86 for CAP/TAP and 8.36 for CAP/FLP. The detection limit was calculated as 40 ng/kg honey sample. In the light of these results, it was emphasized that the SPR nanosensor is able to recognize CAP selectively and has a potential for real‐time CAP detection in honey sample. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Anticandidal activity of cobalt containing sunflower oil‐based polymer

Bioactive metal cobalt containing sunflower oil‐based polyesteramide resin was developed by condensation polymerization reaction among oil‐derived sunflower fatty amide diol, adipic acid, and cobalt chloride. Microwave‐assisted synthesis was used throughout the reaction as it enhances reaction rate, gives higher yield, and greater purity of the products. Spectroscopic techniques, such as Fourier transform infrared spectroscopy and proton‐nuclear magnetic resonance, have been used to establish the structure of the polymers. Presence of cobalt in polymer has been confirmed through atomic absorption spectroscopy. Standard laboratory methods such as acid value, hydroxyl value, saponification value, iodine value, specific gravity, and viscosity were used to study the physicochemical characteristics of the polymers. Thermal behavior of the polymer was analyzed using thermogravimetry/differential thermal analysis. The synthesized polymers were evaluated for their biological activity. This study indicates that the synthesized polymer has significant antifungal activity against Candida, including azole‐resistant strains, advocating further investigation for clinical applications in the treatment of fungal infections. POLYM. ENG. SCI., 53:2650–2658, 2013. © 2013 Society of Plastics Engineers     

Antibody purification by concanavalin A affinity chromatography

Concanavalin A (Con A) immobilized poly(2‐hydroxyethyl methacrylate) (PHEMA) beads in a spherical form (100–150 μm in diameter) were used for the affinity chromatography purification of human immunoglobulin G (IgG) from aqueous solutions and human plasma. PHEMA adsorbents were prepared by suspension polymerization. Bioligand Con A was then immobilized by covalent binding onto PHEMA beads. The maximum IgG adsorption on the PHEMA/Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain PHEMA adsorbents was very low (ca. 0.17 mg/g). Higher adsorption values (up to 54.3 mg/g) were obtained when the PHEMA/Con A beads were used from aqueous solutions. A higher adsorption capacity was observed for human plasma (up to 69.4 mg/g) with a purity of 82.5%. The adsorption capacities of other blood proteins were 2.0 mg/g for fibrinogen and 4.2 mg/g for albumin. The total protein adsorption was determined to be 76.0 mg/g. IgG molecules could be repeatedly adsorbed and desorbed with the PHEMA/Con A beads without noticeable loss in the IgG adsorption capacity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1202–1208, 2005     

Effect of Sodium Carbonate on the Cloud Point in Alkyl Ether/Brine Systems: Apparent Relation with Dynamic Interfacial Tension Minimum

The effect of Na₂CO₃ on the cloud point in Na₂CO₃/surfactant/brine was investigated using two series of nonionic surfactants, C₁₃EO _x and C₁₇EO _x . The cloud point, T _cp, was found to decrease linearly with increasing Na₂CO₃ concentration. This was attributed to Na⁺ and particularly to CO₃ ^2?salting-out effect. The slope a = dTcp/d[Na₂CO₃] became more and more negative as the degree of ethoxylation is increased, suggesting that the higher the number of ethylene oxide (EO) groups the stronger is the cloud point depression for a given increment in Na⁺and CO₃ ^2?ions in solution. This was also illustrated by the linear variation of ΔT _cp = T _cp,0 ? T _cp,[Na2CO3] with the surfactant degree of ethoxylation.     

Preparation,characterization, and dynamic adsorption–desorption studies on polypyrrole encapsulated TiO2 nanoparticles

Binary doped polypyrrole (PPy) encapsulated Titania (TiO₂) nanoparticles were prepared by oxidative polymerization using FeCl₃ as oxidant in presence of camphorsulfonic acid (CSA) as surfactant. Both FeCl₃ (oxidant) and camphorsulfonic acid (surfactant) also act as dopant and hence thus prepared polypyrrole/Titania (TiO₂@PPy) is termed as binary doped nanocomposite i.e. FeCl₃ dopes polypyrrole by oxidation mechanism while camphorsulfonic acid dopes polypyrrole by protonic doping mechanism. The TiO₂@PPy coreshell nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), thermogravimetry, differential scanning calorimetry (DSC), field emission‐scanning electron microscopy (FE‐SEM), and inductance‐capacitance‐resistance (LCR) measurements. The results indicated that the structural and electrical properties of the TiO₂@PPy coreshell nanocomposites were significantly influenced by the extent of TiO₂ nanoparticles loading of polypyrrole. The direct current (DC) electrical conductivity of the as‐prepared TiO₂@PPy coreshell nanocomposites was higher than that of PPy. As‐prepared TiO₂@PPy coreshell nanocomposites were also studied for their dielectric losses for alternating current (AC) which is useful characteristic for their application in the fabrication of charge storing devices. TiO₂@PPy coreshell nanocomposites showed synergistic effect of combining components in improving their alcohol sensing properties. This improvement may be attributed to the adsorption on and desorption from alcohols TiO₂@PPy interface of the nanocomposites and alcohol vapors causing decrease in depletion region. The TiO₂@PPy coreshell nanocomposites were observed to show better reproducibility of electrical conductivity and fast self‐recovery during the alcohol vapor sensing process. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43411.