Oxide scale formation of modified FeCrAl coatings exposed to liquid lead

Modified FeCrAl coatings were studied with respect to their capability to form a thin protective oxide scale in liquid lead environment. They were manufactured by low pressure plasma spraying and GESA surface melting, thereby tuning the Al content. The specimens were exposed for 900 h to liquid lead containing 10^?6 and 10^?8 wt.% oxygen, respectively, at various temperatures from 400 to 550 °C. Threshold values for an Al content that guarantees the formation of thin protective Al-rich oxide scales are determined, dependent on the respective chromium content, on the presence of yttrium in the modified coating, and on the exposure conditions.     

On the Synergy Effect in MoO3–Fe2(MoO4)3 Catalysts for Methanol Oxidation to Formaldehyde

Methanol oxidation to formaldehyde was studied over a series of Fe–Mo–O catalysts with various Mo/Fe atomic ratio and the end compositions Fe₂O₃ and MoO₃. The activity data show that the specific activity passes through a maximum with increase of the Mo content and is the highest for Fe₂(MoO₄)₃. The selectivity to formaldehyde, on the other hand, increases with the Mo content in the catalyst. A synergy effect is observed in that a catalyst with the Mo/Fe ratio 2.2 is almost as active as Fe₂(MoO₄)₃ and as selective as MoO₃. Imaging of a MoO₃/Fe₂(MoO₄)₃ catalyst by SEM and TEM shows that the two phases form separate crystals, and HRTEM reveals the presence of an amorphous overlayer on the Fe₂(MoO₄)₃ crystals. EDS line-scan analysis in STEM mode demonstrates that the Mo/Fe ratio in the amorphous layer is ~2.1 in the fresh catalyst and ~1.7 in the aged catalyst. The enrichment of Mo at the catalyst surface is confirmed by XPS data. Raman spectra give evidence for the Mo in the amorphous material being in octahedral coordination, which is in contrast to the crystalline Fe₂(MoO₄)₃ bulk structure where Mo has tetrahedral coordination. X-ray diffraction (XRD) analysis gives no support for the formation of a defective molybdate bulk structure. The results presented give strong support for the Mo rich amorphous structure being observed on the Fe₂(MoO₄)₃ crystal surfaces being the active phase for methanol oxidation to formaldehyde.     

P2Y11 Agonism Prevents Hypoxia/Reoxygenation- and Angiotensin II-Induced Vascular Dysfunction and Intimal Hyperplasia Development

Vascular dysfunction in cardiovascular diseases includes vasomotor response impairments, endothelial cells (ECs) activation, and smooth muscle cells (SMCs) proliferation and migration to the intima. This results in intimal hyperplasia and vessel failure. We previously reported that activation of the P2Y11 receptor (P2Y11R) in human dendritic cells, cardiofibroblasts and cardiomyocytes was protective against hypoxia/reoxygenation (HR) lesions. In this study, we investigated the role of P2Y11R signaling in vascular dysfunction. P2Y11R activity was modulated using its pharmacological agonist NF546 and antagonist NF340. Rat aortic rings were exposed to angiotensin II (AngII) and evaluated for their vasomotor response. The P2Y11R agonist NF546 reduced AngII-induced vascular dysfunction by promoting EC-dependent vasorelaxation, through an increased nitric oxide (NO) bioavailability and reduced AngII-induced H₂O₂ release; these effects were prevented by the use of the P2Y11R antagonist NF340. Human vascular SMCs and ECs were subjected to AngII or H/R simulation in vitro. P2Y11R agonist modulated vasoactive factors in human ECs, that is, endothelial nitric oxide synthase (eNOS) and endothelin-1, reduced SMC proliferation and prevented the switch towards a synthetic phenotype. H/R and AngII increased ECs secretome-induced SMC proliferation, an effect prevented by P2Y11R activation. Thus, our data suggest that P2Y11R activation may protect blood vessels from HR-/AngII-induced injury and reduce vascular dysfunctions. These results open the way for new vasculoprotective interventions.     

Biochemical Investigation of the Interaction of pICln,RioK1 and COPR5 with the PRMT5–MEP50 Complex

The PRMT5–MEP50 methyltransferase complex plays a key role in various cancers and is regulated by different protein–protein interactions. Several proteins have been reported to act as adaptor proteins that recruit substrate proteins to the active site of PRMT5 for the methylation of arginine residues. To define the interaction between these adaptor proteins and PRMT5, we employed peptide truncation and mutation studies and prepared truncated protein constructs. We report the characterisation of the interface between the TIM barrel of PRMT5 and the adaptor proteins pICln, RioK1 and COPR5, and identify the consensus amino acid sequence GQF[D/E]DA[E/D] involved in binding. Protein crystallography revealed that the RioK1 derived peptide interacts with a novel PPI site.     

Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

This paper presents novel opportunities for management of fly ash by synthesizing the material into cordierite ceramics and using it as a reinforcing phase for light metal alloys. Metal matrix composites (based on magnesium alloy and aluminum alloy) were produced by squeeze casting. The magnesium matrix composites with a suitably selected reinforcing phase content (2 wt.%) exhibited much better strength properties than the unmodified alloy (AM60). It was also demonstrated that the wettability (or the lack thereof) in the metal-ceramic system is critical to successful production of the composites based on the AK7 alloy with cordierite. Light alloy matrix composites reinforced with cordierite ceramics particles are innovative materials that combine high strength with low weight, which may be a key factor of merit for numerous applications of the composite in various branches of industries.     

Supported binary oxide monolayers as selective oxidation catalysts: Bi2Mo3O12/TiO2

Monolayers of bismuth molybdates supported on low-area TiO₂ (anatase) catalyse the oxidation/isomerisation of 1-butene to butadiene and 2-butenes with combined selectivities of 80–100% and show significantly lower specific rates of deep oxidation than does -Bi₂Mo₃O₁₂. As loadings are increased above 2 wt% (equivalent to one monolayer), selectivities remain high and, although the butadiene yields are generally only moderate, in some cases they exceed that shown by the unsupported -phase. This revised version was published online in July 2006 with corrections to the Cover Date.     

Real-time three-dimensional wind simulation for windmill rig tests

This paper deals with the methods of three-dimensional fixed-point wind speed real-time simulation modelled in large band, in order to use them in test rigs for experimental investigation of the wind energy conversion systems. The medium- and long-term components of the non-stationary wind speed are considered as known, being issued from measured data or by adopting a generic model. The spectral characteristics of three-dimensional turbulence are described either by the Kaimal or the von Karman models. The turbulence intensity and the length scale that take part in these models are calculated by the site parameters, using current standards. The basic idea of the methods for large-band three-dimensional wind simulation is to use rational shaping filters that approximate non-integer orders shaping filters issued from the Kaimal and the von Karman models. All the synthesized rational shaping filters use one time constant, automatically adapted to the medium- and long-term components that pilot the other time constants of the shaping filters by a set of parameters practically constant. Some numerical results concerning time series that simulate the non-stationary wind speed with three-dimensional turbulence components based on Kaimal and von Karman models are presented.     

Constructal design of distributed cooling on the landscape

Here we constructal design to determine the area size (or number of users N) to be allocated to a central refrigeration plant, and to configure the distribution network for the distributed cooling system. The main objective is to maximize the net cooling capacity delivered to every user, and to minimize the pumping power required for transporting the chilled water. Two types of distribution networks are investigated: radial and tree‐shaped networks. First, when ducts with a single diameter are used, the net cooling capacity delivered to every user is almost the same, while the pumping power requirement for the tree network is greater than that for the radial network. Multi‐diameter tree networks are investigated next. The pumping power requirement for multi‐diameter tree‐shaped network is less than for radial network when N is greater than 19 if the flow is laminar, and when N is greater than 80 if the flow is turbulent. The global performance of the area‐based cooling system can be improved by increasing the freedom to morph the configuration. Copyright © 2010 John Wiley & Sons, Ltd.     

Charged-Spray Deposition Characteristics Within Cereal Crops

Fluorescent tracer studies experimentally quantified the spatial distribution of droplet mass transfer and charge transfer characterizing three modes of electrostatic pesticide spraying onto barley-weed-soil target arrays. Droplet charging in the 1.5-4.5 mC/kg range provided significant deposition increases on all plant surfaces while beneficially reducing residues on underlying soil. With the intense space-charge spray clouds utilized (e.g., 10 μC/m3), externally applied driving fields as great as 37 kV/m provided no significant deposition increases but instead exacerbated gaseous charge exchange between the spray cloud and the target via undesirable leaf-tip coronas. Nonuniformity characterized deposition of both uncharged and charged sprays throughout the target array, with no improvement provided by spray-entrainment air velocities as great as 2 m/s. Results will guide prototype design by establishing the relative importance of the space charge, the applied field, and the aerodynamic force components for selectively targeting specific sites within living-plant arrays.