Microstructure and multifunctional properties of liquid + polymer bicomponent structural electrolytes: Epoxy gels and porous monoliths

Multifunctional structural batteries and supercapacitors have the potential to improve performance and efficiency in advanced lightweight systems. A critical requirement is a structural electrolyte with superior multifunctional performance. We present here structural electrolytes prepared by the integration of liquid electrolytes with structural epoxy networks. Two distinct approaches were investigated: direct blending of an epoxy resin with a poly(ethylene‐glycol) (PEG)‐ or propylene carbonate (PC)‐based liquid electrolyte followed by in‐situ cure of the resin; and formation of a porous neat epoxy sample followed by backfill with a PC‐based electrolyte. The results show that in situ cure of the electrolytes within the epoxy network does not lead to good multifunctional performance due to a combination of plasticization of the structural network and limited percolation of the liquid network. In contrast, addition of a liquid electrolyte to a porous monolith results in both good stiffness and high ionic conductivity that approach multifunctional goals. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42681.     

Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

This paper presents novel opportunities for management of fly ash by synthesizing the material into cordierite ceramics and using it as a reinforcing phase for light metal alloys. Metal matrix composites (based on magnesium alloy and aluminum alloy) were produced by squeeze casting. The magnesium matrix composites with a suitably selected reinforcing phase content (2 wt.%) exhibited much better strength properties than the unmodified alloy (AM60). It was also demonstrated that the wettability (or the lack thereof) in the metal-ceramic system is critical to successful production of the composites based on the AK7 alloy with cordierite. Light alloy matrix composites reinforced with cordierite ceramics particles are innovative materials that combine high strength with low weight, which may be a key factor of merit for numerous applications of the composite in various branches of industries.     

An accurate volumetric differential pressure method for the determination of hydrogen storage capacity at high pressures in carbon materials

Widely different hydrogen adsorption capacities have been reported for a variety of carbon materials which have attracted attention for hydrogen storage. This has led to doubts as to the validity of some of the claims and it has been suggested that one possible reason for the disparate hydrogen sorption capacities may lie in the inaccurate measurement of the hydrogen adsorbed. The aim of the work described in this paper was to make a contribution to this debate by developing a means and method of producing repeatable, accurate measurements of hydrogen sorption capacity in carbon materials. The apparatus developed is a volumetric differential pressure set-up operating at up to 10 MPa and the method has a conservative limit of detection of 0.1 wt% and an accuracy of ±0.05 wt%, using 1.0-2.5 g samples of the carbon materials studied. These included a carbon nanofiber sample and a series of activated carbons, the latter displaying a direct correlation between the BET effective surface area and the hydrogen sorption capacity of the materials. The amount of hydrogen adsorbed was less than 1 wt% for all the carbons examined.     

Formic acid decomposition on Au catalysts: DFT,microkinetic modeling,and reaction kinetics experiments

A combined theoretical and experimental approach is presented that uses a comprehensive mean‐field microkinetic model, reaction kinetics experiments, and scanning transmission electron microscopy imaging to unravel the reaction mechanism and provide insights into the nature of active sites for formic acid (HCOOH) decomposition on Au/SiC catalysts. All input parameters for the microkinetic model are derived from periodic, self‐consistent, generalized gradient approximation (GGA‐PW91) density functional theory calculations on the Au(111), Au(100), and Au(211) surfaces and are subsequently adjusted to describe the experimental HCOOH decomposition rate and selectivity data. It is shown that the HCOOH decomposition follows the formate (HCOO) mediated path, with 100% selectivity toward the dehydrogenation products (CO₂ + H₂) under all reaction conditions. An analysis of the kinetic parameters suggests that an Au surface in which the coordination number of surface Au atoms is ≤4 may provide a better model for the active site of HCOOH decomposition on these specific supported Au catalysts. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1303–1319, 2014     

Comparative Assay of Antioxidant Packages for Dimer of Estolide Esters

A series of 26 different antioxidants and commercial antioxidant packages designed for petroleum‐based materials, containing both natural and synthetic‐based materials, were evaluated with dimeric coconut‐oleic estolide 2‐ethylhexyl ester (2‐EH), a bio‐based material. The different antioxidants were categorized into different classes of phenolic, aminic, and blended/others materials. The oxidation onset temperatures (OT) using non‐isothermal pressurized differential scanning calorimetry (PDSC) were measured and recorded under previously reported standard conditions. The aminic series gave the best resistance to oxidation as defined by the PDSC method with OT of 246.6 and 244.7 °C for the best two performers, which was a 38 °C improvement over the uninhibited or unformulated dimer estolide material. The phenolic series, containing most of the naturally occurring antioxidants, was the least successful formulation package for the dimer estolide. The blended/other materials, which were specifically designed for petroleum‐based lubricants, did not have the best OT, since the estolides and other bio‐based materials interact differently than their petroleum counterparts. A number of potential antioxidants have been identified as useful additives for the estolides esters. The OT of the estolide and formulated materials correlated well with other bio‐based materials such as biodiesel.     

Synthesis and characterization of poly(ethylene glycol)-b-poly(l-histidine)-b-poly(l-lactide) with pH-sensitivity

In this paper, amphiphilic biodegradable methoxy-poly(ethylene glycol)-poly(l-histidine)-poly(l-lactide) (mPEG–PH–PLLA) triblock copolymers with pH sensitivity were synthesized. The properties of mPEG–PH–PLLA triblock copolymers were investigated by GPC, ¹H NMR, DSC, TGA, XRD and polarized optical microscopy. The results showed that the thermal properties of the triblock copolymers varied with the chain length of PH blocks. The glass transition temperatures (Tg) of the triblock copolymers increased with increasing poly(l-histidine) chain length. The morphologies of PLLA crystals changed from spherulite to dendritic crystal. Moreover, the crystallization rate of triblock copolymers was faster than that of PLLA homopolymer. The pH sensitivity of the self-assembled mPEG–PH–PLLA nanoparticles was investigated. The mean diameter and morphology of the nanoparticles were characterized by DLS, AFM and TEM. The results showed that the mean diameter of mPEG₄₅–PH₃₀–PLLA₈₂ nanoparticles in pH = 5.0 was smaller than that in pH = 7.4.     

Modeling coagulation kinetics incorporating fractal theories: comparison with observed data

There are currently four possible approaches in modeling coagulation kinetics: the traditional Euclidean rectilinear; the Euclidean curvilinear; the fractal rectilinear; and the fractal curvilinear. The fractal model includes the Euclidean case as a subset. The primary purpose of this research is to investigate which of the rectilinear models among these best predicts the evolution of experimental observed particle size distribution (PSD). Using a fractal rectilinear model previously developed by the authors, model predictions were compared with a series of observed PSD data obtained from estuarine sediment particles in a 2m settling column, where the average velocity gradient (G) was 20 or 40s(-1). Nonlinear parameter estimation was performed to estimate two free parameters for the fractal model (the fractal dimension, DF, and the collision efficiency factor, a), and one free parameter (the collision efficiency factor, alpha) for the Euclidean model. Compared with the observed PSD, the simulation showed that the fractal rectilinear model was best, and that this model fit better for the larger size particles. The estimated DF was between 2.6 and 3.0. The research demonstrated that the alpha's have multiple values for the same observed data, depending on the coagulation model used. This finding is significant because a is currently used as a single value based on the conventional Euclidean rectilinear model.     

Characterization of emissions from burning incense

The primary objective of this study was to improve the characterization of particulate matter emissions from burning incense. Emissions of particulate matter were measured for 23 different types of incense using a cyclone/filter method. Emission rates for PM2.5 (particulate matter less than 2.5 microm in aerodynamic diameter) ranged from 7 to 202 mg/h, and PM2.5 emission factors ranged from 5 to 56 mg/g of incense burned. Emission rates were also determined using an electrical low pressure impactor (ELPI) and a small electrostatic precipitator (ESP), and emission rates were compared to those determined using the cyclone/filter method. Emission rates determined by the ELPI method were consistently lower than those determined by the cyclone/filter method, and a linear regression correlation was found between emission rates determined by the two methods. Emission rates determined by the ESP method were consistently higher than those determined by the cyclone/filter method, indicating that the ESP may be a more effective method for measuring semivolatile particle emissions. A linear regression correlation was also found between emission rates determined by the ESP and cyclone/filter methods. Particle size distributions were measured with the ELPI, and distributions were found to be similar for most types of incense that were tested. Size distributions by mass typically ranged from approximately 0.06 to 2.5 microm in aerodynamic diameter, with peak values between 0.26 and 0.65 microm. Results indicated that burning incense emits fine particulate matter in large quantities compared to other indoor sources. An indoor air quality model showed that indoor concentrations of PM25 can far exceed the outdoor concentrations specified by the US EPA's National Ambient Air Quality Standards (NAAQS), so incense smoke can pose a health risk to people due to inhalation exposure of particulate matter. Emissions of carbon monoxide (CO), nitric oxide (NO), and sulfur dioxide (SO2) were also measured for seven types of incense. Emission rates of the gaseous pollutants were sufficient to cause indoor concentrations, estimated using the indoor air quality model, to exceed the outdoor concentrations specified by the NAAQS under certain conditions. However, the incense samples that were tested would fill a room with thick smoke under these conditions.     

Effects of imperfections of the buckling response of composite shells

The results of an experimental and analytical study of the effects of initial imperfections on the buckling response and failure of unstiffened thin-walled compression-loaded graphite-epoxy cylindrical shells are presented. The shells considered in the study have six different shell-wall laminates two different shell-radius-to-thickness ratios. The shell-wall laminates include four different orthotropic laminates and two different quasi-isotropic laminates. The shell-radius-to-thickness ratios includes shell-radius-to-thickness ratios equal to 100 and 200. The numerical results include the effects of traditional and nontraditional initial imperfections and selected shell parameter uncertainties. The traditional imperfections include the geometric shell-wall mid-surface imperfections that are commonly discussed in the literature on thin shell buckling. The nontraditional imperfections include shell-wall thickness variations, local shell-wall ply-gaps associated with the fabrication process, shell-end geometric imperfections, nonuniform applied end loads, and variations in the boundary conditions including the effects of elastic boundary conditions. The cylinder parameter uncertainties considered include uncertainties in geometric imperfection measurements, lamina fiber volume fraction, fiber and matrix properties, boundary conditions, and applied end load distribution. Results that include the effects of these traditional and nontraditional imperfections and uncertainties on the nonlinear response characteristics, buckling loads and failure of the shells are presented. The analysis procedure includes a nonlinear static analysis that predicts the stable response characteristics of the shells, and a nonlinear transient analysis that predicts the unstable response characteristics. In addition, a common failure analysis is used to predict material failures in the shells.     

中国城市无意识下形成的四种空间类型

一种城市主义的批判性实践不应执着于不相干的美学自主性,而应着眼于作为当代城市化主要征象的四种空间类型:位于城市与农村之间界定模糊区域的工厂区;纵横全国的基础设施管线和网络;新型文化聚落、邻里和建筑物;来自农村而在城市工作的新城市主体所形成的心理与社会网络。