Optimization and evaluation of reduced graphene oxide hydrogel composite as a demulsifier for heavy crude oil-in-water emulsion

The rising production of produced water from oilfields had been proven to bring detrimental environmental effects. In this study, an efficient, recyclable, and environmental-friendly reduced graphene oxide immobilized κ-Carrageenan hydrogel composite(κCa GO) was fabricated as an alternative sorbent for crude oil-in-water demulsification. Polyethyleneimine(PEI) was employed to form a stable hydrogel composite. The conditions for the immobilization of graphene oxide(GO) on PEI-modified κ-Carrageenan(κC) beads were optimized appropriately. An immobilization yield of 77% was attained at 2% PEI, 2 h immobilization activation time, and p H6.5. Moreover, the synthesized κCa GO is capable of demulsification with an average demulsification efficiency of 70%. It was found that the demulsification efficiency increases with salinity and κCa GO dosage, and it deteriorates under alkaline condition. These phenomena can be attributed to the interfacial interactions between κCa GO and the emulsion. Furthermore, the κCa GO can be recycled to use for up to six cycles without significant leaching and degradation. As such, the synthesized κCa GO could be further developed as a potential sorbent substitute for the separation of crude oil from produced water.     

Predictive control architecture for real-time image moments based servoing of robot manipulators

This paper presents a real-time architecture for visual servoing of robot manipulators using nonlinear based predictive control. In order to increase the robustness of the control algorithm, image moments were chosen to be the visual features which describe the objects from the image. A visual predictive architecture is designed to solve tasks addressed to robot manipulators with an eye-in-hand configuration. An implementation of the proposed architecture is done so that the capabilities of a 6 d.o.f robot manipulator are extended. The results of different experiments conducted with two types of image moments based controllers (proportional and predictive with reference trajectory) are presented and discussed.     

Partitioned and Implicit–Explicit General Linear Methods for Ordinary Differential Equations

Implicit–explicit (IMEX) time stepping methods can efficiently solve differential equations with both stiff and nonstiff components. IMEX Runge–Kutta methods and IMEX linear multistep methods have been studied in the literature. In this paper we study new implicit–explicit methods of general linear type. We develop an order conditions theory for high stage order partitioned general linear methods (GLMs) that share the same abscissae, and show that no additional coupling order conditions are needed. Consequently, GLMs offer an excellent framework for the construction of multi-method integration algorithms. Next, we propose a family of IMEX schemes based on diagonally-implicit multi-stage integration methods and construct practical schemes of order up to three. Numerical results confirm the theoretical findings.     

Influence of alginite on the reflectance of vitrinite from Joadja,NSW, and some other coals and oil shales containing alginite

Reflectance data for vitrinite occurring in torbanites indicate that the mean maximum reflectance and the range of reflectance values are significantly lowered by the presence of alginite. This is the probable cause of apparently anomalous rank gradients in some deep oil exploration wells. Intermaceral effects need to be considered in assessing rank or maturity from vitrinite reflectance, and by inference, in most other methods. The interpretation of the cause of the effect is open to further study but the findings are highly significant in relation to coal utilization, oil and gas exploration, and studies of oil shales.     

Compatibility of polysaccharide/maleic copolymer blends. IV. Thermal behavior of hydroxypropyl cellulose‐containing blends

The compatibility of the hydroxypropyl cellulose (HPC) with maleic acid–vinyl acetate copolymer in the solid state was studied by thermogravimetry, thermo‐optical analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and optical microscopy. It was established that physical interactions are prevalent in blends with a high content of HPC, whereas chemical interactions predominate in blends with a medium and low content of HPC. By increasing the temperature, the thermochemical reactions are favored. Thermal properties are dependent on the mixing ratio of the components. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2585–2597, 2003     

4D video textures for interactive character appearance

4D Video Textures (4DVT) introduce a novel representation for rendering video‐realistic interactive character animation from a database of 4D actor performance captured in a multiple camera studio. 4D performance capture reconstructs dynamic shape and appearance over time but is limited to free‐viewpoint video replay of the same motion. Interactive animation from 4D performance capture has so far been limited to surface shape only. 4DVT is the final piece in the puzzle enabling video‐realistic interactive animation through two contributions: a layered view‐dependent texture map representation which supports efficient storage, transmission and rendering from multiple view video capture; and a rendering approach that combines multiple 4DVT sequences in a parametric motion space, maintaining video quality rendering of dynamic surface appearance whilst allowing high‐level interactive control of character motion and viewpoint. 4DVT is demonstrated for multiple characters and evaluated both quantitatively and through a user‐study which confirms that the visual quality of captured video is maintained. The 4DVT representation achieves >90% reduction in size and halves the rendering cost.     

Reynolds number scaling of flow in a Rushton turbine stirred tank. Part I—Mean flow, circular jet and tip vortex scaling

We consider scaling of flow within a stirred tank with increasing Reynolds number. Experimental results obtained from two different tanks of diameter 152.5 and 292.1 mm, with a Rushton turbine operating at a wide range of rotational speeds stirring the fluid, are considered. The Reynolds number ranges from 4000 to about 78,000. Phase-locked stereoscopic PIV measurements on three different vertical planes close to the impeller give phase-averaged mean flow on a cylindrical surface around the impeller. The scaling of θ- and plane-averaged radial, circumferential and axial mean velocity components is first explored. A theoretical model for the impeller-induced flow is used to extract the strength and size of the three dominant elements of the mean flow, namely the circumferential flow, the jet flow and the pairs of tip vortices. The scaling of these parameters with Reynolds number for the two different tanks is then obtained. The plane-averaged mean velocity scales with the blade tip velocity above a Reynolds number of about 15,000. However, parameters associated with the jet and tip vortices do not become Reynolds number independence until Re exceeds about 10⁵. The results for the two tanks exhibit similar Reynolds number dependence, however, a perfect collapse is not observed, suggesting a sensitive dependence of the mean flow to the finer details of the impeller.     

A systematic review of the potential hurdles of interoperability to the emergency services in major incidents: recommendations for solutions and alternatives

This study presents a narrative synthesis of a systematic literature review relating to multi-agency interoperability and major incident decision-making in high risk, high stake environments. The review methodology includes the identification of relevant studies, a critical appraisal of the concepts inherent in the main review question and a narrative synthesis of the central themes that relate to the study as a whole. The review firstly outlines what, currently, appear to be the perceived defining features of successful interoperability by using the SAFE-T phase model of major incident decision-making. It then considers whether these defining features are realistically achievable in major incident practice. Findings suggest that the current definition of an interoperable network is too demanding for the inherent complexity and dynamic nature of the major incident task environment. Individual teams tend to focus on agency-specific behaviour, as opposed to coordinated multi-team functioning, and so collective interoperability is not achieved. Inevitably, this reduces the ability to perform collaborative behaviours, including decision-making and action implementation. The paper concludes that aiming for the current conceptualisation of interoperability along a hierarchical command structure may actually inhibit effective decision-making. Instead, multi-agency systems would do better to work towards an improved understanding of a non-hierarchical and decentralised yet interoperable major incident management network. Recommendations include the need to relate theory and practice in the development of multi-agency decision-making via simulation-based training and to deepen our understanding of interoperability to prevent inertia in high risk, high stake major incident environments.     

Gas-liquid mass transfer in three-phase fluidized beds with viscous pseudoplastic liquids

Liquid phase volumetric mass transfer coefficients for oxygen were determined in three-phase fluidized beds of 8 mm glass spheres fluidized by a cocurrent flow of air and pseudoplastic polysaccharide solutions (carboxymethyl cellulose, xanthan). A semi-theoretical relation for the effective shear rate was suggested. The mass transfer coefficients could be correlated, together with literature data for particle diameters of 3 mm and 5 mm in other liquids, using the terminal velocity as the particle-specific property.     

Note on the movement of insecticide droplets through and out of a crop canopy after emission below canopy level

Coarse aerosol sprays with number median diameters in the range 30–40 μm were emitted at 0.25 m above the ground within the canopy of a cotton crop planted at 0.93 m row separation and standing 1.0 m tall. Movement of spray was monitored by vertical stepped paper tower samplers with narrowest section of width 0.13 cm, giving collection by inertial impaction down to 10 μm in a 1 m/sec wind. Horizontal paper targets were used to sample droplets depositing by sedimentation. Droplet number counts indicated that under conditions of moderate instability and associated convective turbulence, droplets were drawn rapidly out of the crop to a height of 2 m (the upper level sampled). The peak concentration of the spray cloud was centred at a height of between 1.0 and 2.0 m beyond 1.0 m downwind of the emission point in the first test, using droplet spectrum with volume median diameter of 41 μm, and beyond 2.5 m downwind of the emission point in the second test with spectrum of 57 μm volume median diameter. Inertial impaction at the 0.25 and 0.5 m levels was slight, except on the samplers within 0.5 m of the sprayer, and sedimentation was only significant at and below 0.5 m in the first two rows sampled. The moderate wind speed of 2.5 m/sec at canopy level produced marked inertial impaction over the first 4.5 m downwind of the sprayer at the 1.0 m level.