单液晶光阀彩色大屏幕投影显示

设计一电路,将彩色图象信息编码到黑白CRT的亮度之中,并将其写入液晶光阀,用白光读出,当编码合适时,读出的象颜色可与原图像一致。本文讨论了这一技术原理并进行了单液晶光阀彩色大屏幕投影的实验验证。     

激光散斑干涉法测定干涉螺接孔边应力分布

本文提出一种测量孔边干涉螺接应力分布的新实验方法,用激光散斑干涉技术测量出由干涉螺接应力形成的孔周位移场分布,进而确定孔这应力分布,在保证测量精度同时,该方法体现出了简单,实用,有效等优点。     

加快增容改造 老厂焕发青春

新安江水电厂６０年代初建成的老厂，随着华东电网的发展，调频调峰任务更加突出，原有的装机容量难以满足系统的需要，结合设备大修与更新对机组进行了增容改造，１９９７－１９９８年对４号机组通过更换或改造水轮机转轮，接力器，调速机，压油装置，整台发电机定子线圈，发电机转子磁极线圈加匝与绝缘更新，推力轴瓦更换塑料瓦，座环过流表面打磨等措施，成功地将４号机组额定功率由７２．５ＭＷ提高到９０ＭＷ，这一经验将会有助     

Fractal fracture and transformation toughening in CuNiAl single crystal

The fracture toughness J _Ic (ρ) and fractal dimension D _f of fractured surfaces of CuNiAl single crystal have been measured at temperatures in the range 20 °C to 120 °C, in which thermoelastic martensitic transformation takes place. The parent phase has higher fracture toughness than the martensite phase due to stress-induced transformation. The relationship between J _Ic (ρ) and D _f has been studied. It was found that log J _Ic (ρ) is linearly related to D _f if the failure involves a single mechanism. The slope of the plot may either be positive or negative for brittle or ductile failure, respectively. The difference in the J _Ic (ρ)-D _f correlation can be understood in terms of the micromechanism of fracture.     

Groups of algebraic integers used for coding QAM signals

Linear block codes over Gaussian integers and Eisenstein integers were used for coding over two-dimensional signal space. A group of Gaussian integers with 2²ⁿ elements was constructed to code quadrature amplitude modulation (QAM) signals such that a differentially coherent method can be applied to demodulate the QAM signals. This paper shows that one subgroup of the multiplicative group of units in the algebraic integer ring of any quadratic number field with unique factorization, modulo the ideal (Pⁿ), can be used to obtain a QAM signal space of 2p^2n-2 points, where p is any given odd prime number. Furthermore, one subgroup of the multiplicative group of units in the quotient ring Z[ω]/(pⁿ) can be used to obtain a QAM signal space of 6p^2n-2 points; one subgroup of the multiplicative group of units in the quotient ring Z[i](pⁿ) can be used to obtain a QAM signal space of 4p^2n-2 points which is symmetrical over the quadrants of the complex plane and useful for differentially coherent detection of QAM signals; the multiplicative group of units in the quotient ring Z[ω]/(2ⁿ) can be used to obtain a QAM signal space of 3·2^2n-2 points, where i=√-1, ω=(-1+√-3)/2=(-1+i√3)/2, p is any given odd prime number, Z[i] and Z[ω] are, respectively, the Gaussian integer ring and the Eisenstein integer ring. These multiplicative groups can also be used to construct block codes over Gaussian integers or Eisenstein integers which are able to correct some error patterns     

Comparison of supports for the direct synthesis of hydrogen peroxide from H2 and O2 using Au–Pd catalysts

The direct synthesis of hydrogen peroxide from H₂ and O₂ using a range of supported Au–Pd alloy catalysts is compared for different supports using conditions previously identified as being optimal for hydrogen peroxide synthesis, i.e. low temperature (2 °C) using a water–methanol solvent mixture and short reaction time. Five supports are compared and contrasted, namely Al₂O₃, -Fe₂O₃, TiO₂, SiO₂ and carbon. For all catalysts the addition of Pd to the Au only catalyst increases the rate of hydrogen peroxide synthesis as well as the concentration of hydrogen peroxide formed. Of the materials evaluated, the carbon-supported Au–Pd alloy catalysts give the highest reactivity. The results show that the support can have an important influence on the synthesis of hydrogen peroxide from the direct reaction. The effect of the methanol–water solvent is studied in detail for the 2.5 wt% Au–2.5 wt% Pd/TiO₂ catalyst and the ratio of methanol to water is found to have a major effect on the rate of hydrogen peroxide synthesis. The optimum mixture for this solvent system is 80 vol.% methanol with 20 vol.% water. However, the use of water alone is still effective albeit at a decreased rate. The effect of catalyst mass was therefore also investigated for the water and water–methanol solvents and the observed effect on the hydrogen peroxide productivity using water as a solvent is not considered to be due to mass transfer limitations. These results are of importance with respect to the industrial application of these Au–Pd catalysts.     

Ranking with uncertain labels and its applications

The techniques for image analysis and classification generally consider the image sample labels fixed and without uncertainties. The rank regression problem studied in this paper is based on the training samples with uncertain labels, which often is the case for the manual estimated image labels. A core ranking model is designed first as the bilinear fusing of multiple candidate kernels. Then, the parameters for feature selection and kernel selection are learned simultaneously by maximum a posteriori for given samples and uncertain labels. The provable convergency Expectation Maximization (EM) method is used for inferring these parameters in an iterative manner. The effectiveness of the proposed algorithm is finally validated by the extensive experiments on age ranking task and human tracking task. The popular FG-NET and the large scale Yamaha aging database are used for the age estimation experiments, and our algorithm outperforms those state-of-the-art algorithms ever reported by other interrelated literatures significantly. The experiment result of human tracking task also validates its advantage over conventional linear regression algorithm. A short version of this paper appeared in ICME07.     

Modeling and design optimization of switched reluctance machine byboundary element analysis and simulation

Nonlinear boundary element analysis provides a more accurate and detailing tool for the design of switched reluctance machines than conventional equivalent-circuit methods. Design optimization through more detailed analysis and simulation can reduce development and prototyping costs and time to market. Firstly, magnetic field modeling of an industrial switched reluctance machine by the boundary element method is reported in this paper. Secondly, performance prediction and dynamic simulation of motor and control design are presented. Thirdly, magnetic forces that cause noise and vibration are studied, to include the effects of motor and control design variations on noise in the design process. Testing of such a motor in the NEMA 215-Frame size is carried out to verify the accuracy of modeling and simulation