Development of Saturable Absorbers for Laser Passive Q‐Switching near 1.5 μm Based on Transparent Ceramic Co2+:MgAl2O4

We describe the development of a reasonable cost Co²⁺:MgAl₂O₄ transparent ceramic plates fabrication technology that allows the producing of parts functioning as passive laser Q‐switches in the 1.3–1.7 μm domain. The main relevant material characteristics were measured. The absorption band, positioned between 1.2 and 1.7 μm, is typical of the ⁴A₂ (⁴F) → ⁴T₁ (⁴F) transition of Co²⁺ substituting Mg²⁺ ions in their T_d symmetry sites. The measured ground‐state absorption cross section σ_gs = 2.9 × 10^?19 cm², saturation contrast γ = 0.12, and depleted ground‐state recovery time τ₂ = 110–430 ns render such parts suitable for the intended application. The radiative lifetime was estimated as . The spin‐orbit splitting constant was estimated as ξ_SL??150 cm^?1 for the ⁴F parent ground state, and ξ_SL ? –575 cm^?1 for the ⁴P parent excited state. Obtained specimens had a transmission of ~80% (t = 2 mm, λ = 600 nm) and included some opaque, white spots. Further improvement of host optical transmission and resistance to laser damage are necessary.     

Selection of catalytically active biotin ligase and trypsin mutants by phage display

Phage display has been shown to facilitate greatly the selectionof polypeptides with desired properties by establishing a directlink between the polypeptide and the gene that encodes it. However,selection for catalytic activities displayed on phage remainsa challenge, since reaction products diffuse away from the enzymeand make it difficult to recover catalytically active phage–enzymes.We have recently described a selection methodology in whichthe reaction substrate (and eventually the reaction product)is anchored on calmodulin-tagged phage–enzymes by meansof a calmodulin binding peptide. Phage displaying a catalyticactivity are physically isolated by means of affinity reagentsspecific for the product of reaction. In this study, we investigatedthe efficiency of selection for catalysis by phage display,using a ligase (the Escherichia coli biotin ligase BirA) andan endopeptidase (the rat trypsin His57     

Structure–Activity Relationships of Benzenesulfonamide‐Based Inhibitors towards Carbonic Anhydrase Isoform Specificity

Carbonic anhydrases (CAs) are implicated in a wide range of diseases, including the upregulation of isoforms CA IX and XII in many aggressive cancers. However, effective inhibition of disease‐implicated CAs should minimally affect the ubiquitously expressed isoforms, including CA I and II, to improve directed distribution of the inhibitors to the cancer‐associated isoforms and reduce side effects. Four benzenesulfonamide‐based inhibitors were synthesized by using the tail approach and displayed nanomolar affinities for several CA isoforms. The crystal structures of the inhibitors bound to a CA IX mimic and CA II are presented. Further in silico modeling was performed with the inhibitors docked into CA I and XII to identify residues that contributed to or hindered their binding interactions. These structural studies demonstrated that active‐site residues lining the hydrophobic pocket, especially positions 92 and 131, dictate the positional binding and affinity of inhibitors, whereas the tail groups modulate CA isoform specificity. Geometry optimizations were performed on each ligand in the crystal structures and showed that the energetic penalties of the inhibitor conformations were negligible compared to the gains from active‐site interactions. These studies further our understanding of obtaining isoform specificity when designing small molecule CA inhibitors.     

l-Lactic acid biosensor based on multi-layered graphene

Pristine graphene platelets and graphene oxide were used as electrode modifiers, aiming the investigation of their electrochemical efficacy towards β-nicotinamide adenine dinucleotide (NADH). The electrochemical detection of NADH is one of the most studied areas of bioelectroanalysis because of the ubiquity of NAD(P)H-based enzymatic reactions in nature. Commercially available graphene and laboratory prepared graphene oxide were used to modify glassy carbon electrodes and the behaviour of such modified electrodes against potassium ferricyanide (III) and NADH was reported. Relying on the graphene-modified transducer, l-lactic dehydrogenase (l-LDH) was successfully immobilised in a 1 % Nafion^® membrane. The developed biosensor, working at +250 mV versus Ag/AgCl reference electrode, was used to assess l-lactic acid in four different types of yogurts, revealing an l-lactic acid concentration ranging between 0.3 and 0.6 %.     

Oxidative degradation of polyamide reverse osmosis membranes: Studies of molecular model compounds and selected membranes

Selected aromatic amides were used to model the chemical reactivity of aromatic polyamides found in thin‐film composite reverse osmosis (RO) membranes. Chlorination and possible amide bond cleavage of aromatic amides upon exposure to aqueous chlorine, which can lead to membrane failure, were investigated. Correlations are made of the available chlorine concentration, pH, and exposure time with chemical changes in the model compounds. From the observed reactivity trends, insights are obtained into the mechanism of RO membrane performance loss upon chlorine exposure. Two chemical pathways for degradation are shown, one at constant pH and another that is pH‐history dependent. An alternative strategy is presented for the design of chlorine‐resistant RO membranes, and an initial performance study of RO membranes incorporating this strategy is reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1173–1184, 2003     

Reynolds number scaling of flow in a Rushton turbine stirred tank. Part I—Mean flow, circular jet and tip vortex scaling

We consider scaling of flow within a stirred tank with increasing Reynolds number. Experimental results obtained from two different tanks of diameter 152.5 and 292.1 mm, with a Rushton turbine operating at a wide range of rotational speeds stirring the fluid, are considered. The Reynolds number ranges from 4000 to about 78,000. Phase-locked stereoscopic PIV measurements on three different vertical planes close to the impeller give phase-averaged mean flow on a cylindrical surface around the impeller. The scaling of θ- and plane-averaged radial, circumferential and axial mean velocity components is first explored. A theoretical model for the impeller-induced flow is used to extract the strength and size of the three dominant elements of the mean flow, namely the circumferential flow, the jet flow and the pairs of tip vortices. The scaling of these parameters with Reynolds number for the two different tanks is then obtained. The plane-averaged mean velocity scales with the blade tip velocity above a Reynolds number of about 15,000. However, parameters associated with the jet and tip vortices do not become Reynolds number independence until Re exceeds about 10⁵. The results for the two tanks exhibit similar Reynolds number dependence, however, a perfect collapse is not observed, suggesting a sensitive dependence of the mean flow to the finer details of the impeller.     

Clinical and Genetic Re-Evaluation of Inherited Retinal Degeneration Pedigrees following Initial Negative Findings on Panel-Based Next Generation Sequencing

Although rare, inherited retinal degenerations (IRDs) are the most common reason for blind registration in the working age population. They are highly genetically heterogeneous (>300 known genetic loci), and confirmation of a molecular diagnosis is a prerequisite for many therapeutic clinical trials and approved treatments. First-tier genetic testing of IRDs with panel-based next-generation sequencing (pNGS) has a diagnostic yield of ≈70–80%, leaving the remaining more challenging cases to be resolved by second-tier testing methods. This study describes the phenotypic reassessment of patients with a negative result from first-tier pNGS and the rationale, outcomes, and cost of second-tier genetic testing approaches. Removing non-IRD cases from consideration and utilizing case-appropriate second-tier genetic testing techniques, we genetically resolved 56% of previously unresolved pedigrees, bringing the overall resolve rate to 92% (388/423). At present, pNGS remains the most cost-effective first-tier approach for the molecular assessment of diverse IRD populations Second-tier genetic testing should be guided by clinical (i.e., reassessment, multimodal imaging, electrophysiology), and genetic (i.e., single alleles in autosomal recessive disease) indications to achieve a genetic diagnosis in the most cost-effective manner.     

The Importance of Small Extracellular Vesicles in the Cerebral Metastatic Process

Brain metastases represent more than 50% of all cerebral tumors encountered in clinical practice. Recently, there has been increased interest in the study of extracellular vesicles, and the knowledge about exosomes is constantly expanding. Exosomes are drivers for organotropic metastatic spread, playing important roles in the brain metastatic process by increasing the permeability of the blood–brain barrier and preparing the premetastatic niche. The promising results of the latest experimental studies raise the possibility of one day using exosomes for liquid biopsies or as drug carriers, contributing to early diagnosis and improving the efficacy of chemotherapy in patients with brain metastases. In this review, we attempted to summarize the latest knowledge about the role of exosomes in the brain metastatic process and future research directions for the use of exosomes in patients suffering from brain metastatic disease.     

The influence of electron beam irradiation,plastic deformation,and re‐irradiation on crystallinity degree,mechanical and sclerometric properties of GUR 1050 used for arthroplasty

The article describes the influence of an electron beam irradiation (I), plastic deformation (D), and re‐irradiation (R) on the properties of ultrahigh molecular weight polyethylene (GUR 1050). It was found that the modification through irradiation entailed a gradual increase in the degree of crystallinity (after irradiation–I). After plastic deformation and re‐irradiation (IDR) the degree of crystallinity decreases which had a direct influence on the mechanical properties. The polymer irradiation only (technique I) resulted in an increase in the maximum stress as compared with the material in the initial state. The application of deformation and re‐irradiation (technique IDR) allowed increasing the deformation resistance by more than 40%. Moreover, the irradiation with an electron beam resulted in the increase in hardness (H) and Young's modulus (E) proportionally to the applied irradiation dose and in the reduction of total indentation work (W_tot) and its components. After deformation and re‐irradiation the polyethylene hardness went down. The application of technique (I) caused an improvement to the material abrasion resistance (reduction of parameter PD–working scratch depth) with the increasing irradiation dose. The introduction of deformation and re‐irradiation did not have a material impact on parameter (PD) increasing at the same time elastic properties of UHMWPE (increase in parameter NPS–elastic recovery). Modification IDR has changed the wear mechanism (β) toward ploughing and has increased the abrasion‐resistance index (W_β) and also significantly reduced the coefficient of friction (μ) of GUR 1050. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43683.