In Vivo Skin Permeation of Sodium Naproxen Formulated in Pluronic F-127 Gels: Effect of Azone® and Transcutol®

The objective of this study was to determine the penetration of sodium naproxen, formulated in Pluronic F-127 (PF-127) gels containing Azone® and Transcutol® as penetration enhancers, through human skin in vivo. It was found that the combination of Azone® and Transcutol® in PF-127 gels enhanced sodium naproxen penetration, with enhancement ratios of up to two fold compared with the formulation containing only Transcutol®. These results were confirmed by TEWL and ATR-FTIR spectroscopy, suggesting a synergic action for Azone® and Transcutol®. Because of the thermo-reversible behavior of Pluronic gels, the influence of the components added to the gel formulations on viscosity, as a function of temperature, was also studied.     

Impact of cycling temperatures on Fusarium verticillioides and Fusarium graminearum growth and mycotoxins production in soybean

BACKGROUND: Fusarium graminearum and F. verticillioides are two very important mycotoxigenic species as they cause diverse diseases in crops. The effects of constant and cycling temperatures on growth and mycotoxin production of these species were studied on soybean based medium and on irradiated soya beans. RESULTS: F. graminearum grew better when was incubated at 15, 20 and 15–20 °C (isothermal or cycling temperature) during 21 days of incubation. Maximum levels of zearalenone and deoxynivalenol (39.25 and 1040.4 µg g^?1, respectively) were detected on soya beans after 15 days of incubation and the optimal temperature for mycotoxin production was 15 °C for zearalenone and 20 °C for deoxynivalenol. F. verticillioides grew better at 25 °C in culture medium and at 15/20 °C and 15/25 °C on soybean seeds. Fumonisin B₁ was produced only in culture medium, and the maximum level (7.38 µg g^?1) was found at 15 °C after 7 days of incubation. CONCLUSION: When growth and mycotoxin production under cycling temperatures were predicted from the results under constant conditions, observed values were different from calculated for both species and substrate medium. Therefore, care should be taken if data at constant temperature conditions are to be extrapolated to real field conditions. Copyright © 2012 Society of Chemical Industry     

Energy performance of an exhibition hall in a life cycle perspective: embodied energy,operational energy and retrofit strategies

Nowadays, the focus on the building energy consumption in the use phase prevails over an interest concerning the energy impacts linked to all the other phases of the construction process. However, reducing operational energy could lead to shifting the impacts from one stage to another. Thus, combining the study of strategies improving energy efficiency in the use phase with a life cycle approach is crucial. Exhibition halls are peculiar buildings from the geometry, construction and use points of view, rarely addressed in energy and life cycle energy analysis studies. Therefore, in this paper, a representative hall of the Milan Trade Fair is taken as a case study. A building energy simulation model is firstly calibrated in order to derive the operational energy for climatisation. The operational energy appears artificially low due to the short use period during the year. When compared with the calculated embodied energy of the envelope and structure, it is found that 57 years would be needed to balance energy spent in the construction and in the use phase. Further, some retrofit interventions are proposed and analyzed. Insulation interventions are not attractive from the economic payback time point of view. However, when the embodied energy of the retrofit interventions is compared with the energy savings in the use phase, interesting energy payback times are obtained. Therefore, this study puts in evidence on the importance of adopting a life cycle perspective, especially for buildings with low-intensity use. Eventually, the critical issues of the life cycle energy analysis are deeply discussed.     

Supercomputing and grid computing on the verification of covering arrays

The Covering Arrays (CAs) are mathematical objects with minimal coverage and maximum cardinality that are a good tool for the design of experiments. A?covering array is an N×k matrix over an alphabet v s.t. each N×k subset contains at least one time each combination from {0,1,??,v?1} ^t , given a positive integer value?t. The process of ensuring that a CA contains each of the v ^t combinations is called verification of CA. In this paper, we present an algorithm for CA verification and its implementation details in three different computation paradigms: (a)?sequential approach (SA); (b)?parallel approach (PA); and (c)?Grid approach (GA). Four different PAs were compared in their performance of verifying a matrix as a CA; the PA with the best performance was included in a different experimentation where the three paradigms, SA, PA, and GA were compared in a benchmark composed by 45 possible CA instances. The results showed the limitations of the different paradigms when solving the verification of CA problem, and points out the necessity of a Grid approach to solve the problem when the size of a CA grows.     

Detection of Channel Variations to Improve Channel Estimation Methods

In current digital communication systems, channel information is typically acquired by supervised approaches that use pilot symbols included in the transmit frames. Given that pilot symbols do not convey user data, they penalize throughput spectral efficiency, and transmit energy consumption of the system. Unsupervised channel estimation algorithms could be used to mitigate the aforementioned drawbacks although they present higher computational complexity than that offered by supervised ones. This paper proposes a simple decision method suitable for slowly varying channels to determine whether the channel has suffered a significant variation, which requires to estimate the matrix of the recently changed channel. Otherwise, a previous estimate is used to recover the transmitted symbols. The main advantage of this method is that the decision criterion is only based on information acquired during the time frame synchronization, which is carried out at the receiver. We show that the proposed criterion provides a considerable improvement of computational complexity for both supervised and unsupervised methods, without incurring in a penalization in terms of symbol error ratio. Specifically, we consider systems that make use of the popular Alamouti code. Performance evaluation is accomplished by means of simulated channels as well as making use of indoor wireless channels measured using a testbed.     

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ-cyclodextrin). The complex was physico-chemically analyzed using differential scanning calorimetry (DSC), X-ray and scanning electron microscopy (SEM) methods and then in vitro tested for its antiproliferative activity by the MTT assay and by cell cycle analysis. Finally, the complex was tested in vivo using an animal model of murine melanoma developed in C57BL/6J mice, where it caused a reduction in tumor volume and weight. The study revealed the beneficial influence of betulinic acid inclusion into the cyclodextrin in terms of antiproliferative activity and in vivo tumor development.     

Adaptive input shaping for single-link flexible manipulators using an algebraic identification

This work proposes an adaptive control scheme applied to single link-flexible manipulators, which combines a feedback controller of the joint angle with an adaptive input shaper updated by an algebraic non-asymptotic identification. The feedback controller is designed to guarantee trajectory tracking of the joint angle, simplifying thus the input shaper, which can be designed for the arm dynamics only. The input shaper is updated by an algebraic identification of the natural frequency corresponding to the first vibration mode of the arm. In addition, the influence of the assumptions adopted to derive the algebraic identification on the performance of the estimation is studied. Finally, the proposed adaptive control strategy is implemented in practice.     

Disinfection Capacity of High-Power Ultrasound Against E. coli O157:H7 in Process Water of the Fresh-Cut Industry

The fresh-cut industry must treat process water to guarantee its microbial quality before reuse or recirculation back into the processing line. In the present study, the suitability of high-power ultrasound (HPU) for disinfecting and recycling process water was evaluated. An ultrasonic horn (20 kHz) was used to inactivate Escherichia coli O157:H7 inoculated in five types of process water which showed different physical and chemical characteristics. Differences in the inactivation level of E. coli O157:H7 at different HPU densities (0.14, 0.28, 0.56, and 1.12 kW/L) with controlled (20–25 °C) and uncontrolled (15–72 °C, 3.6 °C/min) temperature increase were studied. Results showed that the higher the power density and temperature, the higher the efficiency, reaching up to 6 log reductions of E. coli O157:H7. Alkalinity (between 0 and 253 mg HCO₃ ^?/L) and organic matter concentration (between 9 and 3,525 mg O₂/L) in water did not reduce ultrasonic efficacy against E. coli O157:H7. Agglomerates >90 μm, which represented 34 % of those present in the process water, were reduced to only 11 % by HPU. Results indicate that HPU can be successfully applied to treat process water of the fresh produce industry because the antimicrobial efficacy was not affected by the continuous variation of the process water quality. HPU can be a suitable technology for the fresh produce industry to be able to reduce consumption of water and decrease wastewater and the generation of disinfection by-products.