Interfacial interactions in concretes with silica fume and SBR latex

This paper deals with the effect of silica fume and styrene-butadiene latex (SBR) on the microstructure of the interfacial transition zone (ITZ) between Portland cement paste and aggregates (basalt). Scanning electron microscope (SEM) equipped with energy dispersive X-ray analysis system (EDX) was used to determine the ITZ thickness. In the plain concrete a marked ITZ around the aggregate particles (55 μm) was observed, while in concretes with silica fume or latex SBR the ITZ was less pronounced (35–40 μm). However, better results were observed in concretes with silica fume and latex SBR (20–25 μm).     

A new approach to spatial compression of stereoscopic videos

This paper presents a new spatial compression method specifically designed for stereo videos. Different form current compressors, which simply apply known 2D compression techniques, the method proposed here was developed taking into account specificities of the components of the spatial compression process which may impact the correct depth visualization, named Chrominance Subsampling, Discrete WaveletTransform (DWT) and Quantization. Each component was evaluated analyzing where datalosses occur and proposing ways to provide a good balance between compression ratio and image quality, minimizing losses in depth perception. The evaluations were made using standard objective (PSNR) and subjective (DSCQS) metrics, applied to an anaglyphic stereoscopic video base. The results showedour method is competitive regarding compression rate and providessuperior image quality.     

Pheromone-based trapping of West Indian sugarcane weevil in a sugarcane plantation

Attraction of Metamasius hemipterus (Oliver) to gallon and bamboo traps baited with insecticide-treated sugarcane, the male-produced pheromone, 4-methyl-5-nonanol, and 2-methyl-4-heptanol is more efficient if ethyl acetate is added. The optimal traps are ground-level gallon traps baited with insecticide-laced sugarcane, pheromone, and ethyl acetate. Capture rates of ground-level gallon traps are doubled by placing an insecticide-laced pad under the trap, but significantly decreased by placing the trap on a stick above ground. The efficiency of ground-level gallon traps is the same as ground level ramp traps. Mass-trapping M. hemipterus in newly planted sugarcane using ground level bamboo traps baited with insecticide-laced sugarcane and pheromone over six months revealed populations were low for the first two months, became maximum at five months, and declined thereafter. Capture rates of traps bordering newly planted and mature sugarcane were not significantly different from capture rates of traps in the interior of the plots. Capture rates of bamboo traps containing only insecticide-laced sugarcane and deployed at 30 traps/ha averaged 6 weevils/trap/week compared with 66 weevils/trap/week for traps additionally containing pheromone lures and deployed at 5 traps/ha. Capture rates for bamboo traps baited with insecticide-laced sugarcane and pheromone and deployed at 10 and 15 traps/ha were 43 and 38 weevils/trap/week, respectively. Total captures were higher in those plots with a higher density of insecticide-laden sugarcane and pheromone baited traps, and the differences were approximately proportional to trap density in the range of 5–15 traps/ha. Capture rates of traps containing insecticide-laced sugarcane and pheromone were always higher than of traps containing only insecticide-laced sugarcane, but in the first two months after planting the differences were much greater than in months 3–6 after planting.     

A low-cost neurostimulator with accurate pulsed-current control

A constant-current stimulator for high-impedance loads using only low-cost standard high-voltage components is presented. A voltage-regulator powers an oscillator built across the primary of a step-up transformer whose secondary supplies, after rectification, the high voltage to a switched current-mirror in the driving stage. Adjusting the regulated voltage controls the pulsed-current intensity. A prototype produces stimulus of amplitude and pulsewidth within 0 < or = I(skin) < or = 20 mA and 50 micros < or = T(pulse) < or = 1 ms, respectively. Pulse-repetition spans from 1 Hz to 10 Hz. Worst case ripple is 3.7% at I(skin) = 1 mA. Overall consumption is 5.6 W at I(skin) = 20 mA.     

Analysis of water soluble chloride content in concrete

RILEM Technical CommitteesRILEM TC 178-TMC: ‘Testing and Modelling Chloride Penetration in Concrete’

Analysis of water soluble chloride content in concrete Recommendation     

Graph-based representations and techniques for image processing and image analysis

In this paper we will discuss the use of some graph-based representations and techniques for image processing and analysis. Instead of making an extensive review of the graph techniques in this field, we will explain how we are using these techniques in an active vision system for an autonomous mobile robot developed in the Institut de Robòtica i Informàtica Industrial within the project “Active Vision System with Automatic Learning Capacity for Industrial Applications (CICYT TAP98-0473)”. Specifically we will discuss the use of graph-based representations and techniques for image segmentation, image perceptual grouping and object recognition. We first present a generalisation of a graph partitioning greedy algorithm for colour image segmentation. Next we describe a novel fusion of colour-based segmentation and depth from stereo that yields a graph representing every object in the scene. Finally we describe a new representation of a set of attributed graphs (AGs), denominated function-described graphs (FDGs), a distance measure for matching AGs with FDGs and some applications for robot vision.     

Xurography: rapid prototyping of microstructures using a cutting plotter

This paper introduces xurography, or "razor writing," as a novel rapid prototyping technique for creating microstructures in various films. This technique uses a cutting plotter traditionally used in the sign industry for cutting graphics in adhesive vinyl films. A cutting plotter with an addressable resolution of 10 /spl mu/m was used to cut microstructures in various films with thicknesses ranging from 25 to 1000 /spl mu/m. Positive features down to 35 /spl mu/m and negative features down to 18 /spl mu/m were cut in a 25 /spl mu/m thick material. Higher aspect ratios of 5.2 for positive features and 8 for negative features were possible in a 360 /spl mu/m thick material. A simple model correlating material properties to minimum feature size is introduced. Multilayered microstructures cut from pressure sensitive and thermal activated adhesive films were laminated in less than 30 min without photolithographic processes or chemicals. Potential applications of these microstructures are explored including: shadow masking, electroplating, micromolds for PDMS, and multilayered three-dimensional (3-D) channels. This inexpensive method can rapidly prototype microfluidic devices or tertiary fluid connections for higher resolution devices. [1488].     

Labs of the World, Unite!!!

eScience is rapidly changing the way we do research. As a result, many research labs now need non-trivial computational power. Grid and voluntary computing are well-established solutions for this need. However, not all labs can effectively benefit from these technologies. In particular, small and medium research labs (which are the majority of the labs in the world) have a hard time using these technologies as they demand high visibility projects and/or high-qualified computer personnel. This paper describes OurGrid, a system designed to fill this gap. OurGrid is an open, free-to-join, cooperative Grid in which labs donate their idle computational resources in exchange for accessing other labs’ idle resources when needed. It relies on an incentive mechanism that makes it in the best interest of participants to collaborate with the system, employs a novel application scheduling technique that demands very little information, and uses virtual machines to isolate applications and thus provide security. The vision is that OurGrid enables labs to combine their resources in a massive worldwide computing platform. OurGrid is in production since December 2004. Any lab can join it by downloading its software from .