Robust deformation capture from temporal range data for surface rendering

Imagine an object such as a paper sheet being waved in front of some sensor. Reconstructing the time‐varying 3D shape of the object finds direct applications in computer animation. The goal of this paper is to provide such a deformation capture system for surfaces. It uses temporal range data obtained by sensors such as those based on structured light or stereo. So as to deal with many different kinds of material, we do not make the usual assumption that the object surface has textural information. This rules out those techniques based on detecting and matching keypoints or directly minimizing color discrepancy. The proposed method is based on a planar mesh that is deformed so as to fit each of the range images. We show how to achieve this by minimizing a compound cost function combining several data and regularization terms, needed to make the overall system robust so that it can deal with low quality datasets. Carefully examining the parameter to residual relationship shows that this cost function can be minimized very efficiently by coupling nonlinear least squares methods with sparse matrix operators. Experimental results for challenging datasets coming from different kinds of range sensors are reported. The algorithm is reasonably fast and is shown to be robust to missing and erroneous data points. Copyright © 2008 John Wiley & Sons, Ltd.     

Mechanical properties of nanostructured silicon carbide consolidated by spark plasma sintering

Silicon carbide based materials are foreseen candidates for next generation nuclear applications due to a combination of the following properties: high temperature strength, high thermal conductivity and low nuclear activation. Their main drawback lies in their too low toughness. A promising route to enhance such mechanical properties is to reduce the grain size down to the nanosize range. Enabling a quite low sintering time, the spark plasma sintering technique has been used to process nano size monolithic Silicon carbides with several grain sizes and with or without boron additives. The mechanical properties, including Young modulus, flexural strength and toughness, of these materials have been measured from room temperature to 1300 °C and compared to those of a commercially sintered α-SiC. The results are carefully discussed in correlation with the microstructure. Despite a lower density, the obtained flexural strength and toughness properties of the nano grain silicon carbide are very promising when processed without boron additives. Thus, efforts should be focused on the processing of large size nanograins SiC components by SPS without boron and with high density.     

Lipid Composition and State of Oxidation of Fortified Infant Flours in Low‐Income Countries Are Not Optimal and Strongly Affected by the Time of Storage

Food fortification is widely used to address the public health problem of nutrient deficiencies. This study's purpose is to assess the lipid profile and nutritional quality of 13 fortified infant flours (FI) collected “in the field” in Africa and Asia after different periods of storage. The lipid content, fatty acid profiles, lipophilic vitamin content, and lipid oxidation state (peroxide values, secondary oxidation products) are determined. Mycotoxins and packaging materials are also characterized. The lipid content averages 9.1 ± 3.5 g/100 g. Fatty acid profiles are dominated by linoleic (43.3 ± 8.8%), oleic (29.5 ± 7.4%), and palmitic acid (17.8 ± 6.7%) and result in an average ω6/ω3 ratio of 12.2 ± 5.9 but with high values for some FI. Very high overages in vitamins A, D, and E are observed in products stored for short periods (1–6 months), whereas FI stored for more than 12 months has insufficient vitamin content. Lipid oxidation is acceptable but for six products presenting excessive peroxide values. Most products are contaminated by low amounts of mycotoxins but only two FI do not abide by the regulation. A strong correlation between peroxide values, hexanal content, and time of storage is observed. Practical Applications: The expiration dates for FI commercialized in low‐income countries should be shortened from 36 to 12 months so as to guarantee their nutritional quality of these functional foods and to abide by the fortified infant flour legislation. Indeed, FI quality significantly decreases over time of storage. The use of high barrier packaging materials must be generalized, although it is a necessary criterion but not sufficient to ensure the long‐term stability of FI. Special attention should be given to reduce lipophilic vitamin overages and to improve their lipid profile, especially the ω6/ω3 ratio, which has to be lower than 15.     

Influence of Rolling Element Bearing Modeling on the Predicted Thermal Behavior of the FZG Test Rig

A thermomechanical model of the FZG test rig is presented. The numerical model is based on the thermal network method and takes into account power losses due to tooth friction, rolling element bearings (REBs), oil churning, and shaft seals. Some measurements underline that REB rings run at different temperatures. To investigate this difference, several REB models are proposed and compared to measurements. Their influence on the global thermal behavior of the gear unit is discussed and analyzed.     

Understanding the High Voltage Behavior of LiNiO2 Through the Electrochemical Properties of the Surface Layer

Nickel-rich layered oxides are adopted as electrode materials for EV's. They suffer from a capacity loss when the cells are charged above 4.15 V versus Li/Li⁺. Doping and coating can lead to significant improvement in cycling. However, the mechanisms involved at high voltage are not clear. This work is focused on LiNiO₂ to overcome the effect of M cations. Galvanostatic intermittent titration technique (GITT) and in situ X-ray diffraction (XRD) experiments are performed at very low rates in various voltage ranges (3.8–4.3 V,). On the “4.2–4.3 V” plateau the R2 phase is transformed simultaneously in R3, R3 with H4 stacking faults and H4. As the charge proceeds above 4.17 V cell polarization increases, hindering Li deintercalation. In discharge, such polarization decreases immediately. Upon cycling, the polarization increases at each charge above 4.17 V. In discharge, the capacity and dQ/dV features below 4.1 V remain constant and unaffected, suggesting that the bulk of the material do not undergo significant structural defect. This study shows that the change in polarization results from the electrochemical behavior of the grain surface having very low conductivity above 4.17 V and high conductivity below this threshold. This new approach can explain the behavior observed with dopants like tungsten.     

Confinement Effects on the Structure of Entropy-Induced Supercrystals

Depletion-induced self-assembly is routinely used to separate plasmonic nanoparticles (NPs) of different shapes, but less often for its ability to create supercrystals (SCs) in suspension. Therefore, these plasmonic assemblies have not yet reached a high level of maturity and their in-depth characterization by a combination of in situ techniques is still very much needed. In this work, gold triangles (AuNTs) and silver nanorods (AgNRs) are assembled by depletion-induced self-assembly. Small Angle X-ray Scattering (SAXS) and scanning electron microscopy (SEM) analysis shows that the AuNTs and AgNRs form 3D and 2D hexagonal lattices in bulk, respectively. The colloidal crystals are also imaged by in situ Liquid-Cell Transmission Electron Microscopy. Under confinement, the affinity of the NPs for the liquid cell windows reduces their ability to stack perpendicularly to the membrane and lead to SCs with a lower dimensionality than their bulk counterparts. Moreover, extended beam irradiation leads to disassembly of the lattices, which is well described by a model accounting for the desorption kinetics highlighting the key role of the NP-membrane interaction in the structural properties of SCs in the liquid-cell. The results shed light on the reconfigurability of NP superlattices obtained by depletion-induced self-assembly, which can rearrange under confinement.     

Influence of lignin's pH on polyurethane flexible foam formation and how to control it

Low pH of commercial lignins has a catastrophic impact on the polyurethane foaming reactions. Experiments were performed with 10 wt% of lignin with various pHs in polyols. Virgin lignin (pH 2.5, 35% moisture) has the most negative impact as it reduces the initial foam rising rate by 85% and the foam's final height by 35% as compared to the reference foam, lignin free. Drying of this lignin at 80°C for 12 h can reduce this impact while alkaline treatment to bring the lignin's pH to 6.6 almost cancel it. As revealed by in situ dielectric constant measurements, both reactions, gelling via polymerization and blowing via CO₂ degassing, are impacted. In situ Fourier transform infrared analysis of the foaming process demonstrated that blowing reaction is the most pH sensitive. Two methods to counter the pH influence by pH modification were tested and provide interesting results but also significant drawbacks limiting their applicability.     

Guaranteed master for interval-based cosimulation

Software and Systems Modeling - In this paper, we tackle the problem of guaranteed simulation of cyber-physical systems, an important model for current engineering systems. Their is always...     

Identification of non uniform thermal contact resistance in automated tape placement process

In this work focussing on the thermal modeling of the automated tape placement process applied to thermoplastic material, we study the thermal properties of the ply interfaces during in-situ consolidation. Through the comparison of experimental measurements and numerical simulations, we show that it is necessary to consider the existence of an interply thermal contact resistance (TCR). Furthermore, we show that in order to correctly predict the measured temperatures, the value of the thermal resistance has to evolve along the process although a very simple evolution law is sufficient.     

Efficient inverse transform methods for VPL selection in global illumination

Multimedia Tools and Applications - In computer graphics, designing efficient Global Illumination methods is a hot research topic. These methods consist in computing the light distribution inside a...