Resonant tunneling transistor lasers: A new approach to obtain multi-state switching and bistable operation

Bipolar resonant tunneling heterotransistor structures, which can be configured to operate as multi-state or as bistable lasers, are described. Both edge and surface-emitting structures are presented. Computations of various optoelectronics parameters including confinement factor, threshold current density, and cavity modes for a stripe-geometry structure are presented. In addition, simulations of base and collector currents are given for a resonant tunneling transistor to demonstrate the feasibility of lasing in the base region.     

On 2-D recursive LMS algorithms using ARMA prediction for ADPCMencoding of images

A two-dimensional (2D) linear predictor which has an autoregressive moving average (ARMA) representation well as a bias term is adapted for adaptive differential pulse code modulation (ADPCM) encoding of nonnegative images. The predictor coefficients are updated by using a 2D recursive LMS (TRLMS) algorithm. A constraint on optimum values for the convergence factors and an updating algorithm based on the constraint are developed. The coefficient updating algorithm can be modified with a stability control factor. This realization can operate in real time and in the spatial domain. A comparison of three different types of predictors is made for real images. ARMA predictors show improved performance relative to an AR algorithm.     

Highly stable optical add/drop multiplexer using polarization beam splitters and fiber Bragg gratings

We demonstrate a novel wavelength-division add/drop multiplexer employing fiber Bragg gratings and polarization beam splitters. The multiplexer is easy to fabricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5-Gb/s-per-channel wavelength-division multiplexing (WDM) transmission system.     

A novel technique for profiling the lateral n- dopingconcentrations of submicron LDD MOS devices

This paper reports a simple I-V method for the first time to determine the lateral lightly-doped source/drain (S/D) profiles (n^- region) of LDD n-MOSFETs. One interesting result is the direct observation of the reverse-short-channel effect (RSCE). It is observed that S/D n^- doping profile is channel length dependent if reverse short-channel effect exists as a result of the interstitial imperfections caused by Oxide Enhanced Diffusion (OED) or S/D implant. Not only the lateral profiles for long-channel devices but also for short-channel devices can be determined. One other practical application of the present method for device drain engineering has been demonstrated with a LATID MOS device drain engineering work. It is convincible that the proposed method is well suited for the characterization and optimization of submicron and deep-submicron MOSFETs in the current ULSI technology     

Analysis and prevention of DRAM latch-up during power-on

The occasional power-on latch-up phenomenon of DRAM modules with a data bus shared by multiple DRAM chips on different modules was investigated and the circuit techniques for latch-up prevention were presented. Through HSPICE simulations and measurements, the latch-up triggering source was identified-to be the excessive voltage drop at the n-well pick-up of the CMOS transmission gate of read data latch circuit due to the short-circuit current which flows when the bus contention occurs during power-on. By extracting the HSPICE Gummel-Poon model parameters of the parasitic bipolar transistors of DRAM chips from the measured I-V and C-V data, HSPICE simulations were performed for the power-on latch-up phenomenon of DRAM chips. Good agreements were achieved between measured and simulated voltage waveforms. In order to prevent the power-on latch-up even when the control signals (RAS, GAS) do not track with the power supply, two circuit techniques were presented to solve the problem. One is to replace the CMOS transmission gate by a CMOS tristate inverter in the DRAM chip design and the other is to start the CAS-BEPORE-RAS (CBR) refresh cycle during power-on and thus disable all the Dout buffers of DRAM chips during the initial power-on period     

Diagnosis and correction of multiple logic design errors in digitalcircuits

This paper presents a technique to correct multiple logic design errors in a gate-level netlist. A number of methods have been proposed for correcting single logic design errors. However, the extension of these methods to more than one error is still very limited. We direct our attention to circuits with a low multiplicity of errors. By assuming different error dependency scenarios, multiple errors are corrected by repeatedly applying a single error search and correction algorithm. Experimental results on correcting double-design errors and triple-design errors on ISCAS and MCNC benchmark circuits are included     

A Novel and Efficient Feature Extraction Method for Iris Recognition

With a growing emphasis on human identification, iris recognition has recently received increasing attention. Iris recognition includes eye imaging, iris segmentation, verification, and so on. In this letter, we propose a novel and efficient iris recognition method which employs a cumulative‐sum‐based grey change analysis. Experimental results demonstrate that the proposed method can be used for human identification in efficient manner.     

A Temperature‐Controllable Microelectrode and Its Application to Protein Immobilization

This letter presents a smart integrated microfluidic device which can be applied to actively immobilize proteins on demand. The active component in the device is a temperature‐controllable microelectrode array with a smart polymer film, poly(N‐isopropylacrylamide) (PNIPAAm) which can be thermally switched between hydrophilic and hydrophobic states. It is integrated into a micro hot diaphragm having an integrated micro heater and temperature sensors on a 2‐micrometer‐thick silicon oxide/silicon nitride/silicon oxide (O/N/O) template. Only 36 mW is required to heat the large template area of 2 mm×16 mm to 40°C within 1 second. To relay the stimulus‐response activity to the microelectrode surface, the interface is modified with a smart polymer. For a model biomolecular affinity test, an anti‐6‐(2, 4‐dinitrophenyl) aminohexanoic acid (DNP) antibody protein immobilization on the microelectrodes is demonstrated by fluorescence patterns.     

A wavelet transform based POCS Superresolution algorithm

Research interest in multi-frame Superresolution has risen substantially in recent years.This paper presents a modified Projection Onto Convex Set (POCS) superresolution method based on wavelet transform.The method analyzes the image formation model from wavelet multiresolution analysis point of view and defines an closed convex set and its corresponding projection based on wavelet transform.An iterative procedure is utilized to reduce the estimated errors of the result image,and this guarantees the estimated image to lay in the intersection of different convex sets,thus produces a high resolution image with a reduced error.The effectiveness of the algorithm is demonstrated by experimental results.