Apodized chirped fiber Bragg grating for postdispersion compensation in wavelength division multiplexing optical networks

In this paper, a postdispersion compensation unit is proposed leading to a better performance for the optical communication systems. This unit utilizes a chirped fiber Bragg grating (CFBG). For enhanced performance of the CFBG, a proper apodization function is chosen to improve the quality factor (Q‐factor) and the bit error rate (BER) of the system. A 110‐km wavelength division multiplexing (WDM) optical link is investigated. The system performance is evaluated through its Q‐factor, eye diagram, and BER showing best performance when using the Hamming apodization function.     

Synthesis and Characterizations of p-Type Kesterite Ag 2 ZnSnS 4 Thin Films Deposited by Spray Pyrolysis

The fabrication of absorber materials based on kesterite materials has attracted considerable attention in recent articles owing to their excellent optical and electrical properties. In this work, we present the synthesis of Ag2ZnSnS4 films with different thicknesses using a cost-effective spray pyrolysis method. X-ray diffraction was used to check the tetragonal phase and the highly oriented nature of the Ag2ZnSnS4 films. Optical data analysis indicates that a direct allowed transition has appeared in the Ag2ZnSnS4 thin films. The optical results reveal that the energy gap decreases from 1.5 eV to 1.23 eV via enlarging the film thickness of the Ag2ZnSnS4 thin films. Moreover, the dispersion parameters obtained via the Wemple–DiDomenico model and the nonlinear optical parameters of the Ag2ZnSnS4 samples were computed and analyzed.     

Analysis of the decoupled uplink downlink technique for varying path loss exponent in multi-tier HetNet

In this paper, the impact of varying path loss exponent (PLE) on user association probability, decoupled uplink coverage probability as well as decoupled uplink average spectral efficiency in downlink uplink decoupled (DUDe) multi-tier heterogeneous networks, is investigated. We investigate the effect of the difference in path loss exponents in both macro and small cell environments over uplink network performance. It is assumed that the mobile user connected to the macro base station experience different path loss exponent as compared to when connected to small base station. It is observed that the difference of path loss exponents in both cases has significant effect on the user association probability, decoupled uplink coverage probability as well as decoupled uplink average spectral efficiency. Moreover, in order to further support key findings and make sound comparison between coupled and DUDe performance in varying PLE environment, generalized analytical expressions for coupled association probabilities, along with coupled uplink coverage probability and coupled uplink average spectral efficiency have been derived. The analytical results evaluated in this paper are compared with the computer simulation and found in good agreement. Our analysis shows that decoupling technique performs suboptimal for cases where the environments around macro and small base stations are different with respect to each other. The work explained in this paper highlights the limitation of applying DUDe technique in realistic conditions where the PLEs of cellular tiers are not exactly equal to one another.

     

POLYBiNN: Binary Inference Engine for Neural Networks using Decision Trees

Journal of Signal Processing Systems - Convolutional Neural Networks (CNNs) and Deep Neural Networks (DNNs) have gained significant popularity in several classification and regression applications....     

Effects of Geometrical Discontinuities on Distributed Passive Intermodulation in Printed Lines

This paper presents the results of experimental study of passive intermodulation (PIM) generation in microstrip lines with U-shaped and meandered strips, impedance tapers, and strips with the profiled edges. It is shown that the geometrical discontinuities in printed circuits may have a noticeable impact on distributed PIM generation even when their effect is indiscernible in the linear regime measurements. A consistent interpretation of the observed phenomena has been proposed on the basis of the phase synchronism in the four-wave mixing process. The results of this study reveal new features of PIM production important for the design and characterization of low-PIM microstrip circuits.      

New high accuracy CMOS current conveyors

In this paper, a new CMOS CCII⁺ is proposed. The circuit is characterized by high precision in voltage tracking and exhibits very low input resistance. An adaptive voltage offset cancellation methodology is introduced and then applied to the proposed circuit. As a result, a higher accuracy CCII⁺ is presented. For both circuits, the voltage offset cancellation is independent of the input current and voltage. To demonstrate the strength of the proposed architectures, fair comparisons with Liu and Yodprasit CCII realizations are held.     

Propagation Path Loss and Materials Insertion Loss in Indoor Environment at WiMAX Band of 3.3 to 3.6?GHz

The purpose of this study is to characterize the indoor channel for IEEE 802.16 (WiMAX) at 3.3?C3.6?GHz frequency. This work presents a channel model based on measurements conducted in commonly found scenarios in buildings. These scenarios include closed corridor, wide corridor and semi open corridor. Path loss equations are determined using log-distance path loss model and a Rayleigh multipath induced fading, Normal multipath induced fading or a combination of both. A numerical analysis of measurements in each scenario was conducted and the study determined equations that describe path loss for each scenario. Propagation loss is given for 300?MHz bandwidth. This work also represents the insertion loss of different materials and the obstruction loss due the existence of human beings between the transmitting antenna and the receiving one.     

WCDMA Uplink Capacity of Highways Cigar-Shaped Microcells with Incorporated HSUPA Service

The multi-service (voice, data and HSUPA) uplink capacity and the interference statistics of the sectors of the cigar-shaped WCDMA microcell are studied using a model of 5 highway microcells. The two-slope propagation loss model with lognormal shadowing is used in the analysis. It is concluded that the voice and data service are significantly affected by HSUPA users and sector capacity decreases dramatically when one of these users gets connected to a given sector or to one next to it. Also it has been concluded that the capacity decrement is highly sensitive to the location of the HSUPA users. Thus, no more than one HSUPA with a process gain of 16 can be connected to a given base station. In this case, the HSUPA user should interrupt its transmission when it is near to the sector border. No more than one HSUPA user with a process gain of 8 is permitted in a given sector and the sector next to it. When the HSUPA user is at the sector border, its transmission should be disabled.     

Interference coordination for LTE-Advanced and FM broadcasting interoperability

The surest way to guarantee that multiple wireless systems can concurrently exist harmlessly, when operating in the same or adjacent channel, is by analyzing spectrum overlapping. This paper proposes a more accurate model to evaluate the interference power from co-channel and adjacent channel of orthogonal frequency division multiplexing-based long term evolution-advanced (LTE-Advanced) towards broadcasting frequency modulation systems at 800?MHz. Power spectral density overlapping factor is employed, and closed form of the interference power loss is derived. Numerical results demonstrate that the proposed method evaluates more exact interference power than the advanced minimum coupling loss (A-MCL) method, where the co-channel and adjacent channel interference powers are reduced by 1.3 and 3?dB, correspondingly, compared to that obtained using the A-MCL method. This decreases the minimum separation distance between the two systems, which can eventually lead to efficient radio spectrum resources utilization.     

Structural,electronic and thermodynamic properties of SrxCd1−xO: A first-principles study

First principles calculations have been performed within the framework of density functional theory to investigate the structural, electronic and thermodynamic properties of Sr_xCd_1?xO ternary alloys. The exchange-correlation potential for structural properties was calculated by the standard local density approximation (LDA) and GGA (PBE), a more accurate nonempirical density functional generalized gradient approximation (GGA), as proposed by Wu and Cohen [Physical Review B 73 (2006) 235116], while for electronic properties, the Engel and Vosko GGA (EVGGA) and the modified Becke–Johnson (MBJ) of the exchange-correlation energy and potential, respectively, are used. Deviation of the lattice constants from Vegard's law and bulk modulus from linear concentration dependence (LCD) were observed for the ternary alloys. The MBJ band gaps values agree well with the available experimental results. In addition the thermodynamic stability of the alloys was investigated by calculating the critical temperatures of alloys.