Titania NOx sensors for exhaust monitoring

Oxide semiconductors have been examined to develop NO_x sensors for exhaust monitoring. Titania doped with trivalent elements, such as Al³⁺, Sc³⁺, Ga³⁺ or In³⁺, has a good sensitivity and selectivity to NO between 450 and 550 °C, and shows rapid response. A sensor probe for monitoring exhaust NO_x has been fabricated. Many kinds of interference gases, such as C₃H₆, CO and SO₂, have been found to have only a slight influence on the sensor response to NO. The influence of O₂ and H₂O is also negligible, except for the cases of 0% H₂O and fuel-rich conditions. In accordance with these results, the sensor probe operates satisfactority in the exhaust gas of various combustion conditions without interference from the various kinds of gas species in the exhaust gases.     

强化管理提高特超稠油开发效果

河南稠油资源品位低,开采难度大,效益差。近几年,通过实践,逐渐摸索出一套适应开发需要的科学生产管理方法,明显地改善了稠油开发效果。以提高热效率为核心,形成了八大生产管理制度;深化油藏认识,使油藏-工艺-管理三者有机结合,充分利用了地层储热,提高了周期吞吐开发水平;以降粘、防砂、堵窜为重点,实现了地面-井筒-油层三位一体工艺配套,保证了油井正常生产。     

基于假位置选择的位置隐私脱敏算法

传统位置隐私脱敏技术容易遭受背景知识攻击和单点攻击,造成用户位置隐私泄露,危及其生命财产安全。针对此问题,提出了一种基于假位置选择的位置隐私脱敏算法DLPD（dummy location privacy desensitization）。首先,通过衡量位置敏感程度、实行偏移优化、过滤位置查询概率来构造假位置候选集;其次,改善位置分布筛选假位置;最终,构造安全匿名集实现位置隐私脱敏。实验证明,该算法增强了隐私保护强度,提高了隐私保护的有效性,同时,降低了开销,具有实用性。     

Blind estimation of the PN sequence in lower SNR DS-SS signals with residual carrier

This paper presents a method of singular value decomposition (SVD) plus digital phase lock loop (DPLL) to solve the difficult problem of blind pseudo-noise (PN) sequence estimation in low signal to noise ratios (SNR) direct sequence spread spectrum (DS-SS, DS) signals with residual carrier. Of course, the method needs to know the parameters of DS signal, such as the period and code rate of PN sequence. Firstly, the received signal is sampled and divided into non-overlapping signal vectors according to a temporal window, whose duration is two periods of PN sequence. Then, an autocorrelation matrix is computed and accumulated by the signal vectors one by one. The PN sequence with residual carrier can be estimated by the principal eigenvector of this autocorrelation matrix. Furthermore, a DPLL is used to deal with the estimated PN sequence with residual carrier, it estimates and tracks the residual carrier, removes the residual carrier in the end. Theory analysis and computer simulation results show that this method can effectively realize the PN sequence estimation from the input DS signals with residual carrier in lower SNR.     

Register allocation for write activity minimization on non-volatile main memory for embedded systems

Non-volatile memories are good candidates for DRAM replacement as main memory in embedded systems and they have many desirable characteristics. Nevertheless, the disadvantages of non-volatile memory co-exist with its advantages. First, the lifetime of some of the non-volatile memories is limited by the number of erase operations. Second, read and write operations have asymmetric speed or power consumption in non-volatile memory. This paper focuses on the embedded systems using non-volatile memory as main memory. We propose register allocation technique with re-computation to reduce the number of store instructions. When non-volatile memory is applied as the main memory, reducing store instructions will reduce write activities on non-volatile memory. To re-compute the spills effectively during register allocation, a novel potential spill selection strategy is proposed. During this process, live range splitting is utilized to split certain long live ranges such that they are more likely to be assigned into registers. In addition, techniques for re-computation overhead reduction is proposed on systems with multiple functional units. With the proposed approach, the lifetime of non-volatile memory is extended accordingly. The experimental results demonstrate that the proposed technique can efficiently reduce the number of store instructions on systems with non-volatile memory by 33% on average.     

Performance and cost trade-off in Tracking Area reconfiguration: A Pareto-optimization approach

Tracking Area (TA) design is one of the key tasks in location management of Long Term Evolution (LTE) networks. TA enables to trace and page User Equipments (UEs). As UEs distribution and mobility patterns change over time, TA design may have to undergo revisions. For revising the TA design, the cells to be reconfigured typically have to be temporary torn down. Consequently, this will result in service interruption and “cost”. There is always a trade-off between the performance in terms of the overall signaling overhead of the network and the reconfiguration cost. In this paper, we model this trade-off as a bi-objective optimization problem to which the solutions are characterized by Pareto-optimality. Solving the problem delivers a host of potential trade-offs among which the selection can be based on the preferences of a decision maker. An integer programming model has been developed and applied to the problem. Solving the integer programming model for various cost budget levels leads to an exact scheme for Pareto-optimization. In order to deliver Pareto-optimal solutions for large networks in one single run, a Genetic Algorithm (GA) embedded with Local Search (LS) is applied. Unlike many commonly adopted approaches in multi-objective optimization, our algorithm does not consider any weighted combination of the objectives. Comprehensive numerical results are presented in this study, using large-scale realistic or real-life network scenarios. The experiments demonstrate the effectiveness of the proposed approach.     

Integer linear programming optimization of joint RRM policies for heterogeneous wireless systems

Wireless systems will be characterized by the coexistence of heterogeneous Radio Access Technologies (RATs) with different, but also complementary, performance and technical characteristics. These heterogeneous wireless networks will provide network operators the possibility to efficiently and coordinately use the heterogeneous radio resources, for which novel Joint Radio Resource Management (JRRM) policies need to be designed. In this context, this work proposes and evaluates a JRRM policy that simultaneously determines for each user an adequate combination of RAT and number of radio resources within such RAT to guarantee the user/service QoS requirements, and efficiently distribute the radio resources considering a user fairness approach aimed at maximizing the system capacity. To this aim, the JRRM algorithm, which takes into account the discrete nature of radio resources, is based on integer linear programming optimization mechanisms.     

Usable optimistic fair exchange

Fairly exchanging digital content is an everyday problem. It has been shown that fair exchange cannot be achieved without a trusted third party (called the Arbiter). Yet, even with a trusted party, it is still non-trivial to come up with an efficient solution, especially one that can be used in a p2p file sharing system with a high volume of data exchanged.We provide an efficient optimistic fair exchange mechanism for bartering digital files, where receiving a payment in return for a file (buying) is also considered fair. The exchange is optimistic, removing the need for the Arbiter’s involvement unless a dispute occurs. While the previous solutions employ costly cryptographic primitives for every file or block exchanged, our protocol employs them only once per peer, therefore achieving an O(n) efficiency improvement when n blocks are exchanged between two peers. Our protocol uses very efficient cryptography, making it perfectly suitable for a p-2-p file sharing system where tens of peers exchange thousands of blocks and they do not know beforehand which ones they will end up exchanging. Therefore, our system yields up to one-to-two orders of magnitude improvement in terms of both computation and communication (40 s vs. 42 min, 1.6 MB vs. 200 MB). Thus, for the first time, a provably secure (and privacy-respecting when payments are made using e-cash) fair exchange protocol can be used in real bartering applications (e.g., BitTorrent) [14] without sacrificing performance.     

Secure authentication scheme for passive C1G2 RFID tags

Privacy and security concerns inhibit the fast adaption of RFID technology for many applications. A number of authentication protocols that address these concerns have been proposed but real-world solutions that are secure, maintain low communication cost and can be integrated into the ubiquitous EPCglobal Class 1 Generation 2 tag protocol (C1G2) are still needed and being investigated. We present a novel authentication protocol, which offers a high level of security through the combination of a random key scheme with a strong cryptography. The protocol is applicable to resource, power and computationally constraint platforms such as RFID tags. Our investigation shows that it can provide mutual authentication, untraceability, forward and backward security as well as resistance to replay, denial-ofth-service and man-in-the-middle attacks, while retaining a competitive communication cost. The protocol has been integrated into the EPCglobal C1G2 tag protocol, which assures low implementation cost. We also present a successful implementation of our protocol on real-world components such as the INTEL WISP UHF RFID tag and a C1G2 compliant reader.