Novel Constitutive Equation for Predicting Dynamic Recrystallization During Hot Working Considering the Efficiency of Power Dissipation

The efficiency of power dissipation (η) in a dynamic material model has been conventionally used for qualitative predictions to estimate the hot working conditions at which dynamic recrystallization (DRX) is dominant. However, predicting the quantitative value of the DRX fraction (X_DRX) from η remains a challenge. In this paper, a constitutive equation is proposed to quantitatively predict X_DRX using η. The proposed equation for describing X_DRX is derived from the reaction rate equation using the assumption that the DRX rate depends on η. The proposed equation is verified via hot compression tests of equiaxed Ti–6Al–4V ELI alloys (Ti-64) in the (α + β) region. The predicted and experimental X_DRX values are found to be generally consistent with one another, exhibiting an average absolute error of 0.05. Furthermore, the proposed equation provides the same level of prediction accuracy as the conventional Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation. Therefore, the proposed equation can be used to quantitatively predict X_DRX following hot compression tests of equiaxed Ti-64. Moreover, compared with the JMAK equation, the proposed equation is expressed in fewer parameters and constant terms. It is, thus, expected to facilitate the quantitative prediction of X_DRX.

     

Effect of Silicon Dioxide on the Thermal Diffusivity of Aluminum Nitride Ceramics

The thermal diffusivity of AlN ceramics was significantly decreased by the addition of SiO₂. The AlN ceramics with 4 wt% SiO₂ could not be densified by pressureless sintering in the temperature range 1400° to 1800°C. The thermal diffusivity of these samples was very low because of their porous structure. The AlN ceramics containing 2, 4, and 8 wt% SiO₂ were densified by hot-pressing and also had low thermal diffusivity. In these samples, the grains of the 27R polytype that resulted from the reaction between AlN and SiO₂ were dispersed, obstructing the conduction of heat. The relation between the amount of 27R polytype and the thermal diffusivity of the AlN ceramics was determined.     

Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

Photocatalytic H2 evolution under visible light irradiation on Zn1-x Cu x S solid solution

The H₂ evolution reaction from an aqueous Na₂SO₃ solution proceeded with 3.7% quantum yield under visible light irradiation (λ > 420 nm) on a Zn_0.957Cu_0.043S solid solution photocatalyst without co‐catalysts such as Pt. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fracture toughness of silica particulate‐filled epoxy composite

The relationship between the postcuring conditions and fracture toughness on three silica particulate‐filled epoxy composites was investigated. The glass transition temperature, T_g, and the fragility parameter, m, derived from the thermo‐viscoelasticity, were used to characterize the composites, which were postcured under various conditions. The glass transition temperature and fragility both depended on both of the curing conditions and the volume fraction of silica particles. The glass transition temperature increased with the postcuring time and temperature, while the fragility generally decreased as the volume fraction increased. There was no direct correlation between the glass transition temperature and fragility. The fracture toughness depended on both the glass transition temperature and fragility. The composites with a high glass transition temperature and low fragility had high fracture toughness. These results indicate that the glass transition temperature and fragility are useful parameters for estimating the fracture toughness of the silica particulate‐filled epoxy composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2261–2265, 2002     

Comparative study of lipogenic enzymes in several vertebrates

The liver lipogenic enzymes are compared among rats, chickens, frogs and fish. Although the apparent Km values of glucose-6-phosphate dehydrogenase for glucose-6-phosphate are not much different among all the species, those of malic enzyme for malate are much higher in chickens and fish than in rats and frogs. Glucose-6-phosphate dehydrogenase showed very high activities compared with malic enzyme in fish liver, and malic enzyme showed high activities in chicken liver. Although the apparent Km values of acetyl-CoA carboxylase and fatty acid synthetase for substrates are in the same range among all the animals, the activity of acetyl-CoA carboxylase seems to be extremely low in fish and frog livers, and that of fatty acid synthetase is low in frog livers only. In addition, the apparent Km values of α-glycerophosphate acyltransferase of fish liver are very high, and the enzyme activity appears to be extremely low compared to the others. Therefore, the enzymes at the first steps of both fatty acid and glycerolipid syntheses of poikilothermos animals appear to be very low. On the other hand, the Ouchterlony double-diffusion patterns showed that the lipogenic enzymes of chickens, frogs and fish are immunologically different from those of rats, with the exception of acetyl-CoA carboxylase in chickens. Therefore, it is suggested that the fatty acid and glycerolipid forming systems of poikilothermos animals are quite different from those of homoiothermos and the lipogenesis is very low in poikilothermos.     

A novel architecture of dynamically reconfigurable fused multiply–adder for digital signal processing

Introduction

Multiply-accumulate operation is the most fundamental operation in digital signal processing for image processing, robotics and automatic control. In this paper, a novel architecture of dynamically reconfigurable fused multiply-adder (FMA) is proposed.

Methods

Dynamic reconfiguration is a method that can change the circuit configuration without stop of operation. The proposed circuit provides the following four calculation modes by dynamic reconfiguration: (1) complex number FMA mode, (2) real number FMA mode, (3) complex number parallel calculation mode, and (4) real number parallel calculation mode.  The data format is single precision floating point format based on IEEE754. The proposed circuit was designed using Verilog-HDL. It was simulated by logic circuit simulator, and implemented on FPGA.

Result

As a result of circuit synthesis, we confirmed the reduction of resource in the proposed circuit. Furthermore, we confirmed proper result for each calculation mode by logic simulation and experiment on FPGA.

Conclusion

The proposed circuit provides the four calculation modes by dynamic reconfiguration. We confirmed the reduction of resource and proper result for each calculation mode.     

Fracture toughness of bisphenol A‐type epoxy resin

The relationship between the postcuring conditions and the fracture toughness of a bisphenol A‐type epoxy resin cured with acid anhydride was investigated. The glass transition temperature and fragility parameter, derived from the thermo‐viscoelasticity, were used to characterize the epoxy resin postcured under various conditions. Relationship between these two parameters and the fracture toughness was then investigated, based on the fractography results of a microscopic roughness examination of a fractured surface. The values of the glass transition temperature and fragility greatly depended on the postcuring conditions. The glass transition temperature was approximately 400 K when the crosslinking reaction was saturated. The fragility was independent of the saturation of the reaction and varied between 50 and 180. The results of the fracture test and fractography examination showed that there was no direct correlation between the glass transition temperature, the fracture toughness, and the roughness. On the other hand, there was a correlation between the fragility, fracture toughness, and roughness when the glass transition temperature saturated (at 400 K). As the fragility decreased from 180 to 50, the fracture toughness increased from 0.6 to 1.1 MPa · m^1/2 at the same glass transition temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 10: 2266–2271, 2002     

Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.     

Measurement of zeolite,silicate, and phosphate in laundry detergent products by inductively coupled plasma atomic emission spectrometry

This paper reports the development of a method for simultaneously measuring zeolite, silicate, and phosphate in laundry detergent products by inductively coupled plasma atomic emission spectrometry. A sample is decomposed under alkaline oxidative conditions to decompose zeolite, silicate, phosphate, and organic substances. Then hydrochloric acid is added to the decomposed solution to dissolve aluminum hydroxide precipitate before analysis. This sample preparation procedure was investigated by using a total organic carbon analyzer and was confirmed to be applicable to simultaneous measurements of zeolite, silicate, and phosphate. Relative standard deviation for the analysis is less than 2.1%, recovery is more than 99.0%, and the calibration curve gives a correlation coefficient ofR=1.000. The detection limit of this method for aluminum and silicon is 0.1%, and for phosphorus, 0.2% by weight in the product. This method is applicable to various laundry detergent products that contain zeolite, silicate, or phosphate and is five times faster than the three wet chemical methods.