X-ray absorption fine structure analysis of local structure of CeO2–ZrO2 mixed oxides with the same composition ratio (Ce/Zr=1)

Three types of CeO₂–ZrO₂ (Ce:Zr=1:1 molar ratio) compounds with different oxygen storage/release capacities (OSCs) were characterized by means of the Ce K-edge and Zr K-edge X-ray absorption fine structure (XAFS). In order to investigate the relationship between the OSC and local structure, the quantitative EXAFS curve-fitting analysis was applied. By enhancing the homogeneity of the Ce and Zr atoms in the CeO₂–ZrO₂ solid solution, the OSC performance increased. Especially, the atomically homogeneous Ce_0.5Zr_0.5O₂ solid solution exhibited the highest OSC among these CeO₂–ZrO₂ samples. Additionally, the local oxygen environment around Ce and Zr was remarkably modified by enhancing the homogeneity of the CeO₂–ZrO₂ solid solution. It was postulated that the enhancement of the homogeneity of the CeO₂–ZrO₂ solid solution and the modification of the oxygen environment would be the source for the OSC improvement.     

Reflection and absorption characteristics of electromagnetic waves for PV modules

In this paper, the authors investigated the reflection and absorption characteristics of a general photovoltaic (PV) module. As a result, the electromagnetic waves could be attenuated only 6 dB in typical PV module. However, if the PV module is installed in the outer wall of buildings, electromagnetic interference is caused by the surroundings. To reduce this electromagnetic interference, the authors suggested a method to absorb electromagnetic wave using multiple PV modules that have deference impedance, and simulation was performed. As a result, it was confirmed that using a typical PV module and the PV module including electronic device, the reflection waves of those PV modules could be attenuated up to 12 dB.     

Recent progress in the development of visible light-driven powdered photocatalysts for water splitting

Many photocatalyst materials for water splitting have been developed, particularly since the second half of the 1990s. Highly efficient water splitting on tantalate photocatalysts under UV irradiation has been achieved. Moreover, band engineering by doping, valence band formation, and synthesis of solid solutions, has led to the development of a large number of visible light-driven photocatalysts for _H2${\mathrm{H}}_2$ or _O2${\mathrm{O}}_2$ evolution from aqueous solutions containing electron donors or acceptors. Z-scheme photocatalyst systems for water splitting to _H2${\mathrm{H}}_2$ and _O2${\mathrm{O}}_2$ under visible light irradiation have been developed. This progress in the development of visible light-driven photocatalysts for water splitting is reviewed.     

Risk of cancer and non-cancer diseases in the atomic bomb survivors

Late health effects of exposure to atomic bomb radiation have been evaluated in survivors. A cohort of 120 321 people has been followed since 1950 for mortality, including the cause of death using the Japanese population registry system (Life Span Study), and for cancer incidence using population-based cancer registries. Findings have included a markedly increased risk of leukaemia several years after the exposure, increased risk of various malignant tumours several decades after the exposure and, more recently, findings of increased rates of non-cancer diseases such as cardiovascular diseases.     

Effect of oxygen content on impact toughness of a fine-grained magnesium alloy

Fine-grained Mg-3Al-Zn alloys with various oxygen contents were prepared by a powder metallurgy process, and the effect of oxygen content on the impact toughness of the fine-grained magnesium alloys was quantitatively investigated. It is found that the impact toughness of magnesium alloys with mean grain size smaller than 3 μm is extremely high when the oxygen content is less than 400 pp, but it becomes very low as the oxygen content is higher than 1000 ppm. Both magnesium oxides and hydroxides are detected in the magnesium alloys. The presence of excessive magnesium oxides and hydroxides deteriorates the dynamic plastic deformation ability of the fine-grained magnesium alloys.     

Enhancement of optical absorption for below 5 μm thin-film poly-Si solar cell on glass substrate

Optical confinement effect of thin-film polycrystalline-Si (poly-Si) solar cell on glass substrate fabricated at low-temperature has been investigated as a function of cell thickness of less than 5 μm. We found that it is possible to fabricate the textured Si thin film in situ on a glass substrate and that the reflectance at long-wavelength light is reduced by surface texturing. Thin-film poly-Si solar cell and a-Si:H/(0.45 μm)/poly-Si (5 μm) tandem solar cell exhibit the efficiency of 8.6% and 12.8%, respectively. The numerical study in terms of the light trapping explains the excellent high short-circuit current density (_sc above 27 mA/cm² at the 4.7 μm thin-film poly-Si solar cell.     

Geo- and Hydro-Mechanical Evaluation of Slope Failure Induced by Torrential Rains in Northern-Kyushu Area,July 2009

Torrential rainfall in mid-July 2009 triggered numerous geodisasters such as slope failure and debris flow in Chugoku and Northern Kyushu areas of Japan. A number of slope failures and debris flows occurred in Yamaguchi and Fukuoka prefectures resulting in extensive damage to human life and infrastructure. One of the most serious geodisasters included a slope failure followed by debris flow at Sasaguri-machi and Fukuchi-machi, Fukuoka prefecture, Japan. This paper summarizes the results of geotechnical investigations on the geodisaster sites in Fukuoka prefecture. The geotechnical investigation included determining a series of grain size distributions, consistency limits and conducting direct box shear tests for collapsed soils collected at six disaster sites. The generation mechanisms of slope failure followed by debris flow were also investigated by analyzing the precipitation, topography, geology, and strength properties of the collapsed soils. Moreover, slope deformation and stability analyses were coupled with an unsaturated-saturated seepage analysis to investigate the slope failure mechanism. The main findings from the study are summarized as: The physical properties, such as the grain size distribution, the plastic limit and liquid limit of collapsed soils, are summarized and compared with the results of other failure slopes in the literature. The collapsed soil was characterized as being a well grained soil (the uniformity coefficient >50) and highly weathered (the ignition loss >5%), however, with regard to the liquid limit and plastic index, there were no remarkable findings. The original shear strength for collapsed soils with natural water content is relatively large and slope failure doesn't occur because the cohesion in the shear strength is induced by a suction force between the soil particles under unsaturated condition. However, water seepage into the soil induces a drastic decrease in the shear strength, which is mainly caused by a decrease in cohesion (losing suction) resulting from soil saturation. In addition, the drained/undrained condition in the shear process is also sensitive to shear strength. For example, both water seepage and the shear process with constant volume cause an approximate 30% reduction in shear strength for Fukuchi-machi and Sasaguri-machi soil samples. Therefore, the reduction of cohesive strength due to water seepage and the low permeability of the slope are the parameters which trigger geodisaster. Based on the results of slope deformation and a stability analyses which took the change in water pressure and cohesive strength into account, the geodisaster at Fukuchi-machi was simulated, it is reasonable to assume that the shallow failure near the top of slope occurred due to torrential precipitation of about 100 mm per hour which triggered a debris flow.     

Novel Fabrication of High-Quality ZrO2 Ceramic Thin Films from Aqueous Solution

We report on the direct deposition of high-quality ZrO₂ thin films on various kinds of substrates by the liquid phase deposition method. After reaction for 24 h, thin films formed on various kinds of substrates, and the obtained thin film was comprised of densely packed nano-sized particles. The film annealed at 500°C showed a tetragonal phase at room temperature and this phenomenon has been discussed from the viewpoint of crystallite size effect. The result of optical transmittance measurement revealed that high transparency, more than 70% transmittance, has been achieved for the film after annealing at 900°C.     

Photocatalytic water splitting into H2 and O2 over various tantalate photocatalysts

Photocatalytic water splitting into H₂ and O₂ over various tantalates was reviewed and factors affecting photocatalytic activities of tantalates were discussed from a viewpoint of the crystal structure and the energy structure. Many tantalates, K₃Ta₃Si₂O₁₃, alkali and alkaline earth tantalates, were highly active photocatalysts for water splitting. The high activities were mainly due to the high conduction band level consisting of Ta5d orbitals. NiO-loaded NaTaO₃ with the distorted perovskite structure showed the highest activity among tantalates. Moreover, the activity of the NiO/NaTaO₃ photocatalyst was remarkably improved by doping of lanthanoids. The apparent quantum yield of NiO/NaTaO₃ doped with lanthanum was ca. 50% at 270 nm.     

100 Å-thick tunnel junction by double impurity doping liquid phase epitaxy for V-band TUNNETT oscillation

The tunnel injection transit time (TUNNETT) diodes with p⁺p⁺n⁺n⁻n⁺ structure were fabricated by liquid phase epitaxy (LPE). About 100 Å tunnel junction (p⁺n⁺) was successfully prepared by the double impurity diffusion of Ge and S during LPE growth. Continuous wave (CW) oscillation was realized at 51.520 GHz in the V-band cavity with the phase noise of −60 dBc/Hz at 1 kHz bandwidth.