Multivariate curve resolution analysis on the multi-component water sorption process into a poly(2-methoxyethyl acrylate) film

In our previous study, sorption process of water into a biocompatible polymer film, poly(2-methoxyethyl acrylate) (PMEA) was monitored by time-resolved in situ attenuated total reflection infrared (ATR-IR) spectroscopy [S. Morita, et al., Langmuir 23, 3750 (2007)]. In the present study, noisy and heavily overlapped O-H stretching vibrational bands of diffusing water have been analyzed from the series spectra where the spectral shapes change irregularly with time. In spite of these complications, a powerful spectral analysis technique, multivariate curve resolution (MCR) by means of alternating least squares (ALS), yielded smooth and meaningful pure component spectra and detailed kinetic sorption profiles of each component, excluding noise. Ordinary smoothing techniques and Gaussian curve fitting would not achieve these significant results. The quantification of the kinetic parameters such as amplitudes (a) and relaxation time constants (tau) is significant for the systematic development of biocompatible materials and also for revealing the mechanisms of biocompatibility of a material. Moreover, the ratios of coefficients of each component at saturation corresponded well to the values obtained by Tanaka et al. measured by gravimetric analysis. This study is the first to report the detailed concentration profile of each water component whose sorption kinetics is discussed comprehensively.     

Fracture- and Indentation-Induced Structural Changes of Sodium Borosilicate Glasses

It is known that indentation using a diamond indenter induces permanent densification to result in plastic or inelastic deformation of glass. However, it is still unclear whether a high tensile stress causes such a structural change or not. In this study, fracture- and indentation-induced structural changes of glasses with the compositions of 20 Na₂O − 40x B₂O₃ – (80−40x) SiO₂ (in mol%, x = 0, 0.5, 1, 1.5) are investigated. Two-point bending tests of the glass fibers are performed to apply a high tensile stress to the glasses, and Vickers indentation tests of the glasses are also carried out for comparison. The structural change of the glass is evaluated by using Raman spectroscopy. It is elucidated that a tensile side of the fractured fiber for every composition shows a permanent structural change, which is characterized by a lower wave number shift of Raman peak assigned to the Si-O-Si bending vibration mode. It is also found that the behaviors of Raman peaks of the fractured fiber are opposite to those of the indented glass under a high compressive stress.     

Effect of Temperature Change on Interfacial Behavior of an Acoustically Levitated Droplet

Under the microgravity environment, new and high quality materials with a homogeneous crystal structure are expected to be manufactured by undercooling solidification, since the material manufacturing under the microgravity environment is more static than that under the normal gravity. However, the temperature change on the interface of the material in space can affect on the material processing. The purpose of the present study is to investigate effect of the temperature change of interface on the large levitated droplet interface. A water droplet levitated by the acoustic standing wave is heated by YAG laser. In order to heat the water droplet by the laser heating, rhodamine 6G is solved in it to achieve high absorbance of the laser. The droplet diameter is from 4 to 5.5 mm. The deformation of the droplet interface is observed by high speed video camera. The temperature of droplet is measured by the radiation thermometer. It is noticed that the larger droplet under the higher sound pressure tends to oscillate remarkably by the laser heating.     

Determination of emotional content of video clips by low-level audiovisual features

Affective analysis of video content has greatly increased the possibilities of the way we perceive and deal with media. Different kinds of strategies have been tried, but results are still opened to improvements. Most of the problems come from the lack of standardized test set and real affective models. In order to cope with these issues, in this paper we describe the results of our work on the determination of affective models for evaluation of video clips using audiovisual low-level features. The affective models were developed following two classes of psychological theories of affect: categorial and dimensional. The affective models were created from real data, acquired through a series of user experiments. They reflect the affective state of a viewer after watching a certain scene from a movie. We evaluate the detection of Pleasure, Arousal and Dominance coefficients as well as the detection rate of six affective categories. For this end, two Bayesian network topologies are used, a Hidden Markov Model and an Autoregressive Hidden Markov Model. The measurements were done using audio-only models, video-only models and fused models. Fusion is done using two different methods, a Decision Level Fusion and Feature Level Fusion. All tests were conducted using localized affective models, both categorial and dimensional. Results are presented in terms of detection rate and accuracy for affective families, affective dimensions and probabilistic networks. Arousal was the best detected dimension, followed by dominance and pleasure.     

Trap Levels in Eu and other Rare‐Earth Ions Codoped CaAl2O4 Phosphors

Photoluminescence spectrum, trap depths, and densities of trapped carriers of CaAl₂O₄:Eu phosphor crystals doped with rare‐earth elements were studied using the thermally stimulated luminescence technique. Trap depths and densities of the specimens vary with rare‐earth elements doped as the auxiliary activators. Tm and Nd are found to be effective for the strong afterglow phosphorescence peaking at λ = 442 nm for several hours after the excitation. CaAl₂O₄:Eu phosphor crystals doped with Nd and Tm include high density of carriers trapped at E = 0.59 and 0.52 eV, respectively.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

The lubrication mechanism in low speed plastic deformation with a synthetic lubricant — infiltration of lubricant into the boundary contact region

To investigate and evaluate the micro-pool mechanism in a mixed lubrication regime using polybutene lubricants, experiments were performed using 1 mm brass sheet, for various surface rough nesses of a work piece and die, lubricant viscosities and extrusion speeds. Systematic study showed that (1) the lower viscosity lubricant is easily squeezed out from the micro-pools into the flat are a through the troughs between the tool and work piece caused by plastic deformation of work piece, and (2) with decrease in lubricant viscosity and speed, or the larger the tool surface roughness becomes, the more lubricant infiltrates into the tool-work piece interface, which reduces the actual friction coefficient.     

Short-term algal toxicity test based on phosphate uptake

In order to develop a short-term algal toxicity test, the growth of and the phosphate uptake by the green alga Selenastrum capricornutum during batch culture were observed. In the control medium, S. capricornutum took up phosphate earlier than it grew. It was also observed that the phosphate uptake was inhibited by the presence of a toxicant. From these results, phosphate uptake was considered as one of the useful effect parameters for a short-term algal toxicity test. As the removal rate of phosphate from the medium is a function of the amount of algal cell initially inoculated, the test period is variable. The relationship between the amount of inoculation and phosphate uptake was examined and the test conditions suitable for a 3-h toxicity test were established as one example. According to this test procedure, the inhibitory effect of some toxicants on the phosphate uptake was determined. For comparison, a conventional algal assay based on algal growth was also performed. The EC50s for both tests were close. This indicated that the algal toxicity test method proposed in this paper would be useful for the uses where rapidity is required.     

A Study on the Distances of Small Mobile Robot Moves towards Infants

In recent years, it is remarkable that various robots are being developed, and the development of robot technology is beginning to be taken into an actual living space. There are still many questions that we will have to answer for the harmonization of living together with a robot. This study is focused on ＂the study of how to plan and design a living space in harmonizing with robots＂, and focused on the effects of infants （subjects） along with the distance between robots and themselves. The study is to seek for the minimum distance for the subjects who felt that ＂I do not want a robot to be any closer being approached to me＂. This experiment was conducted among 30 infants at the kindergarten, utilizing a small experimental robot. A small robot whose dimension is 120 mm （W） ×130 mm （D） × 70 mm （H）, approaching infants as is to see if it would make any differences to the infant＇s reactions.     

Immunological characterisation of barley polypeptides in lager foam

Eight monoclonal antibodies (mAb) recognising barley polypeptides have been identified from a library developed to wheat prolamins. The specificity or the mAb has been determined using enzyme-linked immunosorbent assay (ELISA) and immunoblotting. Six were of broad specificity, recognising D, B, C and γ-hordeins to varying degrees by both techniques. IFRN 0610 preferentially recognised γ-hordeins by ELISA but was highly specific for this hordein group by immunoblotting. Another mAb, IFRN 0624, bound to a M_r ∽ 18000 polypeptide belonging to the CM protein (trypsin/α-amylase inhibitor) family by immunoblotting. This, or a related protein, was detected by 0624 in all hordein fractions using ELISA. These mAb, together with two others described previously and found to recognise the repeat motif of C hordein, were used in ELISA and immunoblot analysis of Octyl-Sepharose fractions of lager foam. Hordein polypeptides were found in all foam fractions, indicating that much foam protein originates from the malt. The CM-like protein was found present in a virtually unmodified form. In contrast, the repeat motif of C hordein was not detected, indicating that it had either been destroyed or masked by other beer constituents. The foam stabilising agent, propylene glycol alginate (PGA), increased the apparent hydrophobicity of hordein fragments suggesting that at least part of the activity of PGA is mediated by interactions with the hordein components of foam.