Very fast generation of content-preserved photo collage under canvas size constraint

Photo collage, which constructs a compact and visually appealing representation from a collection of input images, can offer a most convenient and impressive user experience. Most previous approaches to collage construction have utilized saliency detection and visibility optimization. However, such methods are computationally expensive and not feasible for real-time applications such as online image retrieval or interactive photo browsing. Moreover, the effectiveness of automatic saliency detection may be questionable. Even if the main regions of interest are retained accurately, some visually not salient but semantically important items such as logos, captions, and copyright information located at the margins and corners may be missed. In our alternative approach, we address the issue of content-preserved collage, which avoids content-harmful processes such as cropping or changes to aspect ratio and orientation. Based on a full balanced binary layout tree, our algorithm can pack all the input images tightly onto the collage canvas while keeping their visual information unchanged. The proposed algorithm is fast, requiring less than 0.5 ms to generate a 100-image collage. We also present several extensions and applications oriented to a variety of usage contexts and device platforms.     

Effect of phonons on the ac conductance of molecular junctions

We theoretically examine the effect of a single phonon mode on the structure of the frequency dependence of the ac conductance of molecular junctions, in the linear response regime. The conductance is enhanced (suppressed) by the electron-phonon interaction when the chemical potential is below (above) the energy of the electronic state on the molecule.     

Investigation of cobalt buildup behavior and suppression by zinc injection on stainless steel under HWC conditions using simultaneous continuous measurements of corrosion and cobalt buildup

In boiling water reactor (BWR) plants, cobalt-60 (⁶⁰Co) is the main source of radiation exposure, and it builds up on oxide films of structural materials. The ⁶⁰Co buildup is caused by its incorporation into the oxide films. In the BWR plants using hydrogen water chemistry (HWC) to mitigate the oxidative environment, Zn injection has been applied to reduce the ⁶⁰Co incorporation. In this work, we studied the incorporation mechanism of ⁶⁰Co into the oxide films on type 316 stainless steel and the suppression mechanism of ⁶⁰Co incorporation. In order to discriminate between coprecipitation and adsorption of ⁶⁰Co incorporation under HWC conditions, we measured the corrosion amount of the base metal and the ⁶⁰Co buildup amount, using simultaneous continuous measurements for 500 h. The ⁶⁰Co incorporation increased with time both with and without Zn injections. We found that the time dependencies of ⁶⁰Co incorporation with and without Zn have one and two regions, respectively. In the initial stage for both, ⁶⁰Co was incorporated mainly by coprecipitation. After 100 h without Zn, ⁶⁰Co was incorporated by both coprecipitation and adsorption. These results mean that Zn suppressed both coprecipitation and adsorption of ⁶⁰Co.     

Performance evaluation of eddy current flowmeter in Monju

Measurement of the temperature and flow rate at each fuel subassembly outlet is an effective way for a liquid metal fast breeder reactor to detect a loss of coolant accident or reactivity-initiated accident in the early stage and to understand the reactor’s thermal hydrodynamic performance. Japan Atomic Energy Agency has developed the eddy current flowmeter in practical use and installed 34 of them in the upper core structure of fast breeder reactor, Monju. This report presents data obtained by using the flowmeters in Monju. We observed high linearity between each of the flowmeter’s signal intensity and the primary sodium’s flow rate under 10–100% flow rate condition. High linearity was also observed in a region of low velocity (approx. 0.25 m/s). The fluctuation of flow rate observed by the flowmeters was below 0.2 m/s which is 5% of the time-averaged velocity under a rated condition. These experimental results show that the eddy current flowmeter is an effective tool to detect the changes in relative flow rate.     

Synthesis and ultrastructure of plate-like apatite single crystals as a model for tooth enamel

Hydroxyapatite (HAp) is an inorganic constituent compound of human bones and teeth, with superior biocompatibility and bioactivity characteristics. Its crystal structure is hexagonal, characterized by a(b)- and c-planes. In vertebrate long bones, HAp crystals have a c-axis orientation, while in tooth enamel, they have an a(b)-axis orientation. Many methods can be used to synthesize c-axis oriented HAp single crystals; however, to the best of our knowledge, there have been no reports on a synthesis method for a(b)-axis oriented HAp single crystals. In this study, we successfully synthesized plate-like HAp crystals at the air–liquid interface of a starting solution via an enzyme reaction of urea with urease. Crystal phase analysis and ultrastructure observations were carried out, and the results indicated that the particles were single crystals, with almost the same a(b)-axis orientation as tooth enamel. It is hoped that by utilizing their unique surface charge and atomic arrangement, the resulting particles can be used as a high-performance biomaterial, capable of adsorbing bio-related substances and a model for tooth enamel.     

Novel chelate-setting calcium-phosphate cements fabricated with wet-synthesized hydroxyapatite powder

The hydroxyapatite (HAp) powder preparation process was optimized to fabricate inositol phosphate-HAp (IP6-HAp) cement with enhanced mechanical properties. Starting HAp powders were synthesized via a wet chemical process. The effect of the powder preparation process on the morphology, crystallinity, median particle size, and specific surface area (SSA) of the cement powders was examined, together with the mechanical properties of the resulting cement specimens. The smallest crystallite and median particle sizes, and the highest SSA were obtained from ball-milling of as-synthesized HAp powder under wet conditions and then freeze-drying. IP6-HAp cement fabricated with this powder had a maximum compressive strength of 23.1 ± 2.1 MPa. In vivo histological studies using rabbit models revealed that the IP6-HAp cements were directly in contact with newly formed and host bones. Thus, the present chelate-setting HAp cement is promising for application as a novel paste-like artificial bone.     

Cotton wool-like poly(lactic acid)/vaterite composite scaffolds releasing soluble silica for bone tissue engineering

Cotton wool-like poly(l-lactic acid) and siloxane-doped vaterite (SiV) composite scaffolds were prepared with a modified electrospinning system for bone tissue engineering applications. The effects of changing the SiV content in the materials from 10 to 30 wt% on elasticity and the ability to release calcium ions and soluble silica were evaluated. The elasticity of the cotton wool-like composites was almost the same as that of the PLLA from the results of compressibility and recovery tests. The materials released calcium ions for more than 56 days and soluble silica for 28–56 days in a tris buffer solution (pH 7.4). Mouse osteoblast-like cells (MC3T3-E1 cells) were cultured on/in the cotton wool-like materials or the fibremats out of the same composite materials as that used for the cotton wool-like materials. The cells penetrated into and proliferated inside the cotton wool-like materials, although they mainly adhered on the fibremat surface.     

Oblique detonation wave stability around a spherical projectile by a high time resolution optical observation

Spherical projectiles were launched into detonable mixtures over a wide range of projectile velocities from near to about 1.8 times the Chapman–Jouguet (C–J) velocity. Oblique detonation waves (ODWs) and shock-induced combustions (SICs) stabilized around the projectiles were visualized with high time and high spatial resolutions using the Schlieren technique and a high-speed camera with a 1-μs frame speed. Unsteady wave structures called Straw Hat type structures consisting of a SIC region followed by a C–J ODW were observed near stabilizing criticalities of a C–J ODW, and they were divided into two propagation types, depending on whether the C–J ODW could be stabilized [11], [12], [14]. In the present study, we suggested wave structures of the Straw Hat types based on our examination of dozens of continuous images. Triple points were observed at the intersection of a bow shock, a C–J ODW and a transverse detonation or shock wave when projectile velocities were slightly higher than C–J velocities. Onsets of local explosions in the SIC region for stabilizing the ODW in the Straw Hat type structures have been reported [14]. We observed this stabilizing mechanism by visualizing onsets of periodical local explosions and their transition to spherical detonation waves when the projectile velocity was much higher than the C–J velocity. We also determined stabilizing criticalities using a stoichiometric acetylene-oxygen mixture diluted with argon or krypton in 50% or 75% volumetric fractions, respectively. We found that the stabilizing criticalities did not depend only on the ratio of the projectile diameter and the cell size of the mixture.     

Adaptive-integration-time image sensor with real-time reconstruction function

A computational image sensor is proposed in which the pixel controls its integration time to light intensity. The integration time of each pixel is selected from among several lengths of integration time and the integration time is shortened if the pixel intensity becomes saturated. Although the integration time of each pixel varies, the pixel intensity is adjusted on the sensor in real time. The dynamic range of the pixel value output from the proposed sensor is greatly widened. A prototype of 64/spl times/48 pixels has been fabricated by using 2-poly 2-metal 0.8-/spl mu/m CMOS process. The proposed sensor has simple functions for the comparison of intermediate integration value and threshold to control the integration time and nonlinear image reconstruction. Because the maximum number of the comparison-reset operations during a frame is three, one of the four integration times can be selected pixel by pixel. The circuit and layout design of the prototype which has computational elements based on column parallel architecture are described and the fundamental functions have been verified. By the experiments, it has been verified that the sensor can achieve a wide dynamic range by adapting to light.