3D computation of hydrogen-fueled combustion around turbine blade-effect of arrangement of injector holes-

Recently,a number of environmental problems caused from fossil fuel combustion have been focused on.Inaddition,with the eventual depletion of fossil energy resources,hydrogen gas is expected to be an alternativeenergy resource in the near future.It is characterized by high energy per unit weight,high reaction rate,widerange of flammability and the low emission property.On the other hand,many researches have been underway inseveral countries to improve a propulsion system for an advanced aircraft.The system is required to have higherpower,lighter weight and lower emissions than existing ones.In such a future propulsion system,hydrogen gaswould be one of the promising fuels for realizing the requirements.Considering these backgrounds,our group hasproposed a new cycle concept for hydrogen-fueled aircraft propulsion system.In the present study,we perform 3dimensional computations of turbulent flow fields with hydrogen-fueled combustion around a turbine blade.Themain objective is to clarify the influence of arrangement of hydrogen injector holes.Changing the chordwise andspanwise spacings of the holes,the 3 dimensional nature of the flow and thermal fields is numerically studied.     

Measurement of the isotopic abundance of boron-10 by inductively coupled plasma-quadrupole mass spectrometry

This article describes the method for measuring the isotopic abundance of ¹⁰B in nuclear grade boron carbide using inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS). The results of investigation revealed that both the integration time and the dwell time have a major influence on the reproducibility of ICP-QMS measurements. As a result of optimization of the measurement conditions, reproducibility below 0.2% relative standard deviation (RSD) (0.17% RSD maximum) was achieved. In addition, the measured value of the isotopic abundance of ¹⁰B for each sample well agreed with the values measured by the TIMS. Thus, the method described in the present investigation was very effective in the analysis of isotopic abundance of ¹⁰B in B₄C or H₃BO₃. The results of this study suggest that ICP-QMS could be applied to the precise analysis of the isotopic abundance of ¹⁰B required in the field of nuclear applications.     

Detection of norovirus RNA in bivalve molluscs by using bacteria-culture-employed method (A3T method)

Norovirus (NV) RNA has rarely been detected in foods despite the use of highly sensitive methods such as RT-PCR and real-time RT-PCR. In the modified method (A3T method) reported previously, a bacterial culture process was introduced into the standard protocol for NV detection to remove some inhibitor(s) present in food ingredients. To confirm the efficiency of the A3T method and to examine NV contamination in bivalve molluscs, we tried to detect NV RNA in bivalve molluscs on the market and in oyster samples associated with foodborne outbreaks by using the standard method and the A3T method. NV RNAs were detected in 20 samples (18.0%) of 111 bivalve molluscs, including oysters, on the market by use of the A3T method, while only one sample (0.9%) was positive according to the standard method. NV RNA was also detected in 10 of 35 oyster samples related to foodborne outbreaks by the A3T method. Those results show that the A3T method is suitable for the detection of NV in bivalve molluscs in general laboratories.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Dietary exposure to acrylamide in a group of Japanese adults based on 24-hour duplicate diet samples

Acrylamide is a probable human carcinogen and known human neurotoxin that can be generated in food through heating. Using a mathematical modelling approach, our previous study estimated long-term average dietary exposure to acrylamide in the Japanese people; however, the validity of these estimates remained unknown. Here, we aimed to obtain a more accurate estimate of acrylamide exposure that would reflect the usual practice of heat processing and consumption of foods in the population. We collected duplicate diet samples and dietary records during 24 h from a group of Japanese adults. A total of 110 duplicate diet samples were analysed for acrylamide by LC-MS/MS. Data from individual dietary records were used to examine the association between dietary acrylamide exposure and consumption of selected food groups (e.g., coffee, tea, confectioneries, and vegetables prepared at high temperature [deep-frying, stir-frying, sautéing, and baking]). Of the 110 homogenised diet samples, 108 contained detectable levels of acrylamide. Dietary exposure to acrylamide ranged from 8 to 1582 ng/kg body weight (bw)/day, with the mean value of 215 ng/kg-bw/day and median value of 143 ng/kg-bw/day. This mean value was higher than the value we previously estimated for Japanese adults using a mathematical approach. Multiple linear regression analysis showed log dietary acrylamide exposure was significantly associated with consumption of coffee and vegetables prepared at high temperature during 24-hr of sampling (adj. R² = 0.250, p < 0.001). We revealed significant difference in dietary acrylamide exposure between participants who had coffee and vegetables prepared at high temperature (median, 169 ng/kg-bw/day; range, 35–1224 ng/kg-bw/day, n = 42) and those who had none of them (median, 75 ng/kg-bw/day; range, 8–311 ng/kg-bw/day, n = 15) (Steel-Dwass test, p < 0.05).     

Synthesis and Preliminary Evaluation of 11C-Labeled VU0467485/AZ13713945 and Its Analogues for Imaging Muscarinic Acetylcholine Receptor Subtype 4

Muscarinic acetylcholine receptors (mAChRs) have five distinct subunits (M₁–M₅) and are involved in the action of the neurotransmitter acetylcholine in the central and peripheral nervous system. Attributed to the promising clinical efficacy of xanomeline, an M₁/M₄-preferring agonist, in patients of schizophrenia and Alzheimer's disease, M₁- or M₄-selective mAChR modulators have been developed that target the topographically distinct allosteric sites. Herein we report the synthesis and preliminary evaluation of ¹¹C-labeled positron emission tomography (PET) ligands based on a validated M₄R positive allosteric modulator VU0467485 (AZ13713945) to facilitate drug discovery. [¹¹C]VU0467485 and two other ligands were prepared in high radiochemical yields (>30 %, decay-corrected) with high radiochemical purity (>99 %) and high molar activity (>74 GBq μmol⁻¹). In vitro autoradiography studies indicated that these three ligands possess moderate-to-high in vitro specific binding to M₄R. Nevertheless, further physiochemical property optimization is necessary to overcome the challenges associated with limited brain permeability.     

Responsiveness of electric resistance of polymer-grafted carbon black/alumina gel composite against solvent vapor and solute in solution

The carbon black/alumina gel composites were prepared by sol-gel reaction of aluminum isopropoxide in the presence of polymer-grafted carbon black. The electric resistance of the alumina gel composite from polymer-grafted carbon black was very sensitive to vapor of good solvent for grafted polymer on carbon black: the electric resistance of the alumina gel composite suddenly decreased in solvent vapor and returned to initial resistance when it was transferred into dry air. The effect of surface area and particle size of carbon black on the responsiveness was also investigated. In addition, the electric resistance of the alumina gel composite was found to respond to water and methanol in n-hexane and diethyl ether.     

222Rn concentrations in greenhouses in Aomori Prefecture, Japan

Greenhouses are possible places with high 222Rn concentrations, since soil, the source of 222Rn, is directly exposed inside them. To examine this point, 222Rn concentrations in 28 greenhouses at five locations in Aomori Prefecture were measured for approximately 1 year with passive Rn detectors. For 1 week, measurements of 222Rn concentration and working level were also carried out with active detectors to get equilibrium factors and the ratio of 222Rn concentration in working time to non-working time in selected greenhouses. The geometric mean of annual 222Rn concentrations in greenhouses was 13 Bq m-3, and the same as that in dwellings and lower than that in indoor workplaces in the prefecture. However, variation of the 222Rn concentrations was far larger than in other environments, and ranged from the lowest level in outdoor workplaces to the highest level in indoor workplaces. Significant seasonal variation was also observed in 222Rn concentrations. The mean effective dose from 222Rn and its progenies was estimated to be 0.047 mSv year-1 for a farmer working in a greenhouse.     

Preparation of poly(thiophene-alt-pyrrole) bearing chiral LC group

ABSTRACT

Preparation of poly(thiophene-alt-pyrrole bearing mesogen) was carried out with Migita–Kosugi–Stille coupling type polycondensation with an aid of Pd(0) complex catalyst. The resultant polymer shows lyotropic liquid crystallinity with good film-forming property. The smectic fan-shaped texture is maintained after completion of evaporation of solvent from the polymer solution. The cast film having liquid crystal (LC) order shows light emission function upon irradiation of excitation light at 460 nm. The polymer shows LC domain emission. Mechanical orientation allows to yield LC domain aligned film with band structure. Chiral mesogenic side chain induces π-conjugated main chain helicity from distance in molecular level.     

Experimental study on latent heat storage characteristics of W/O emulsion -Supercooling rate of dispersed water drops by direct contact heat exchange-

Recently, much attention has been paid to investigate the latent heat storage system. Using of ice heat storage system brings an equalization of electric power demand, because it will solved the electric -power-demand-concentration on day-time of summer by the air conditioning. The flowable latent heat storage material, Oil/Water type emulsion, microencapsulated latent heat material-water mixture or ice slurry, etc., is enable to transport the latent heat in a pipe. The flowable latent heat storage material can realize the pipe size reduction and system efficiency improvement. Supercooling phenomenon of the dispersed latent heat storage material in continuous phase brings the obstruction of latent heat storage. The latent heat storage rates of dispersed water drops in W/O (Water/Oil) emulsion are investigated experimentally in this study. The water drops in emulsion has the diameter within 3 ～ 25μm, the averaged water drop diameter is 7.3μm and the standard deviation is 2.9μm. The direct contact heat exchange method is chosen as the phase change rate evaluation of water drops in W/O emulsion. The supercooled temperature and the cooling rate are set as parameters of this study. The evaluation is performed by comparison between the results of this study and the past research. The obtained experimental result is shown that the 35K or more degree from melting point brings 100% latent heat storage rate of W/O emulsion. It was clarified that the supercooling rate of dispersed water particles in emulsion shows the larger value than that of the bulk water.