Performance test and flow measurement of contra-rotating axial flow pump

An application of contra-rotating rotors has been proposed against a demand for developing higher specificspeed axial flow pump.In the present paper,the advantage and disadvantage of using contra-rotating rotorsare described in comparison with conventional type of rotor-stator,based on theoretical and experimentalinvestigations.The advantages are as follows:(1)The pump is inherently designed as smaller sized and atlower rotational speed.(2)A stable head-characteristic curve for flow rate with negative slope appears.(3)As the rear rotor rotational speed is varied as independent control of front rotor,the wider range of highperformance operation is obtained by rear rotor speed control in addition to front rotor speed control.Thedisadvantages are as follows:(1)The structure of double shaft system becomes complex.(2)The pumpperformance is inferior at over flow rate as the rear rotor loading is weakened.(3)The blade rows interac-tion from rear rotor to front rotor more strongly appears.Then the rear rotor design is a key to achievehigher pump performance.Some methods to overcome these disadvantages will be discussed in more detailstoward wider usage of contra-rotating axial flow pump in various industrial fields.     

Flow-induced vibrations in closed side branch pipes and their attenuation methods

Some problems due to flow-induced vibrations related to closed side branch pipes have been observed in thermal and nuclear power plants. Fluctuating pressure generated in the main pipes was unusually, acoustically excited in closed side branch pipes, and intense vibrations were caused at pipes and components. For example, flow-excited acoustic resonance in closed side branches of stub pipes of safety relief valves caused the failure of steam dryers in the United States Quad City Unit 2 nuclear power plant. Furthermore, there was a possibility that residual air or gas in a closed side branch pipe unexpectedly caused severe vibrations of low frequency in the feed water piping system. We have investigated the root cause and influence of air on severe vibrations. Intense fluctuating pressure was often caused by water hammer due to valve closure and it became larger in the closed side branch pipes. We showed that an additional side branch with an orifice was very effective to suppress the flow-induced acoustic resonance. Design methods of the orifice to attenuate fluctuating pressure generated by water hammer were presented considering Mach number, the pressure loss coefficient of orifice and the intensity of particle velocity. Moreover, suitability of the characteristic curve method was confirmed for evaluation of the attenuation effect of an orifice on fluctuating pressure generated by water hammer. Finally, we considered some flow-induced vibration problems related to closed side branch pipes and their attenuation methods.     

Investigation of Reduction and Smelting Mechanism in the Hi‐QIP Process

A new coal‐based reduction and smelting process for production of high quality iron pebbles in a rotary hearth furnace (Hi‐QIP Process) was developed. The reduction, carburization, smelting, and separating mechanism of the Hi‐QIP process were investigated. The experiments were carried out in a graphite heater furnace under rapidly heating up to 1773 K. A mixture of coal and ore produced molten metal and slag, which were held on the coal and did not come into contact with the refractory located under the coal layer. It is confirmed that the reduction of wettability between the iron and slag promotes the separation of them, when the content of FeO slag decreases. High productivity of the process is expected when using iron ore with small particle diameter and low gangue content. Favourable operating results were obtained in a pilot test using a rotary hearth furnace with a diameter of 7 m and a width of 1.5 m. This test demonstrated the possibility of continuous production of iron pebbles with high productivity (15t‐iron/d).     

Endogenous interleukin-8 (IL-8) surge in granulocyte colony-stimulating factor-induced peripheral blood stem cell mobilization

The relationship between stem cell mobilization with granulocyte colony-stimulating factor (G-CSF) and the endogenous production of interleukin-8 (IL-8), macrophage inflammatory protein-1alpha (MIP-1alpha), tumor necrosis factor-alpha (TNF-alpha), and interferon-gamma (IFN-gamma) was studied in normal donors for allogeneic peripheral blood stem cell (PBSC) transplantation. G-CSF was administered to 20 normal donors at a dose of 10 microg/kg/d for 5 days with aphereses on days 5 and 6 of G-CSF treatment. Cytokine serum levels were measured using an enzyme-linked immunosorbent assay (ELISA) before and during G-CSF treatment. Before treatment, the average level of IL-8 was 7.1 pg/mL, increasing to 207.0 pg/mL on day 5 and 189.1 pg/mL on day 6. Serum IL-8 levels correlated CD34(+) cell numbers (P =.0151 and P =.0005 on days 5 and 6, respectively) and colony-forming unit-granulocyte-macrophage (CFU-GM) numbers (P =.0019 and P =.0010 on days 5 and 6, respectively). Furthermore, preapheresis serum IL-8 levels correlated with the yield of CD34(+) cells (P =.0027). In contrast, before treatment, the average levels of MIP-1alpha, TNF-alpha, and IFN-gamma were 70.1, 4.03, and 3.84 pg/mL, respectively, and no significant changes in the levels of these cytokines were observed during G-CSF treatment. These studies suggest that IL-8 production may be critical to G-CSF-induced stem cell mobilization, although the underlying mechanism could not be clarified.     

A link selection method for web‐browser using eye‐gaze input

Methods for browsing Web pages using eye‐gaze input have been proposed for severely physically handicapped people who cannot handle a computer mouse to utilize convenient services on the Internet. There are two important functions for Web‐browsers, namely scroll and link selection. Since it is difficult to introduce existing link selection methods using eye‐gaze input for home usage because of high costs or complexity, we propose in this paper a novel link selection method using eye‐gaze input. The proposed method analyzes the HTML source in a Web page and makes a group of links by the content of each. In evaluation experiments, we compare the proposed method with a comparative method using eye‐gaze input with respect to the average response time in selecting the links. The results of the experiments show that the average response is nearly twice as fast as that of the compared method. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.