Polymer coating method developed for carbon stripper foils

The problem of handling the fragile carbon foils (mounting on the frame, placing in the stripper changer) that easily break when self-supporting has been solved by coating carbon foils with poly-monochloro-para-xylylene. It was found that the polymer-coating method could also be used to produce carbon foils thicker than 100 μg/cm² by alternated deposition of carbon and poly-monochloro-para-xylylene layers. Carbon foil of 500 μg/cm² thick and 10 cm in diameter was produced by this method and mounted to a foil holder. Results of lifetime measurement for singly coated foils are also presented.     

The fluorescence behavior from SAM of dendron with rhodamine B as a center

We studied energy transfer between rhodamine B molecules centered in each corn-shaped dendrons that forms self-assembled monolayer (SAM) film on an Au substrate. A SAM film using dendron moiety as a spacer can change the distance between rhodamines depending on the size, so that the energy transfer from an initially photo-excited rhodamine to its surrounding molecules can be controlled. The absorption spectrum of a SAM film for each generation of dendron was measured to ascertain a linear correlation between the generation and the distance. Picosecond time-resolved fluorescence spectra showed clear differences in the fluorescence decay dynamics between third-generation (G3) and fourth-generation (G4) dendron SAM films. In addition, we found that “dry” or “wet” dendron SAM considerably influenced fluorescence behavior. As a result, the use of “wet” G4 SAM is suitable in preserving photo-excitation energy. This is because it gave almost equal dynamics to G4 dendron in the dilute solution and prevented deactivation by energy dissipation.     

Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation

This study describes a new method of experimental design to obtain a response surface of buckling load of laminated composites. Many evaluations for genetic algorithms for stacking sequence optimizations require high computational cost. That evaluation cost can be reduced by an approximation using a response surface. For a response surface for stacking sequence optimizations, lamination parameters are adopted as variables of the approximation function of the entire design space instead of ply angles for each ply. This study presents, proposes and investigates a new method of experimental design in detail. For most analytical tools, stacking sequences is demand as input data and lamination parameters cannot be applied directly to the tools. Therefore, the present study proposes and applies a new D-optimal set of laminates to the stacking sequence optimizations of the problem of maximization of buckling load of a composite cylinder. The new experimental design is a set of stacking sequences selected from candidate stacks using D-optimality. Consequently, the D-optimal set of laminates is shown to be effective for design of experiments of response surfaces for maximization of the buckling load of composite structures.     

Can porous polymeric scaffolds be functionalized by stem cells leading to osteogenic differentiation? A systematic review of in vitro studies

The aim of this study was to analyze the influence of nanoporous structure of polymeric biomaterials on the in vitro osteogenic induction of human stem cells. An electronic search in three databases (MEDLINE, SCOPUS, and Web of Science) was performed for articles that were published before May 2018. In vitro studies were included if they met the following criteria: (1) the use of polymeric scaffolds (natural or synthetic); (2) the co-culture of human stem cells with the scaffold; and (3) cell viability, proliferation, and osteogenic differentiation assays. The main characteristics of the published studies were summarized, and a quality assessment tool was used to analyze methodological features. Eighty-eight potential articles were firstly retrieved. Thirteen were eligible for qualitative analysis. Only three studies characterized cell stemness. Nanostructure of the scaffolds showed a significant influence on viability, proliferation, and osteogenic differentiation of human stem cells. Combination of porosity between 72 and 93% and a large range diameter between 50 and 224 μm resulted in more remarkable cellular proliferation and differentiation. Porous polymeric scaffolds can be functionalized by stem cells leading to osteogenic induction. High standards of laboratory practice and accurate methodological reporting are essential for the credibility of the results.     

Decentralized PD control for non-uniform motion of a Hamiltonian hybrid system

In this paper, a decentralized proportional-derivative （PD） controller design for non-uniform motion of a Hamiltonian hybrid system is considered. A Hamiltonian hybrid system with the capability of producing a non-uniform motion is developed. The structural properties of the system are investigated by means of the theory of Hamiltonian systems. A relationship between the parameters of the system and the parameters of the proposed decentralized PD controller is shown to ensure local stability and tracking performance. Simulation results are included to show the obtained non-uniform motion.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3

The respective influences of calcination, drying methods, and washing conditions on the morphologies, surface properties, and photocatalytic activities of TiO₂ powders prepared from acid treatments of BaTiO₃ were investigated. Rutile powder was obtained using the treatment under strong acid conditions. It possesses a bundle-like shape and comprises rutile nanorods. After calcination, characteristic voids were observed in the particles. Anatase powder was obtained by adjusting pH values of a BaTiO₃ suspension to 2.5-3. Drying at 110 °C engendered the formation of spheroidal anatase, although freeze-dried anatase particles assembled into a flake-like shape. The freeze-dried samples show lower crystallinity. With grafting Cu ions, rutile exhibited better photocatalytic performance for the decomposition of gaseous 2-propanol (IPA) under visible light, although it did not work effectively for anatase.     

Rheological studies of nickel oxide and quartz/hematite mixture systems

This study aimed to investigate the rheology of two-mineral mixture systems as a function of pH and solid concentration. Single minerals (nickel oxide, quartz and hematite) and two-mineral systems (nickel oxide–quartz and nickel oxide–hematite) were studied. Rheology tests were conducted to investigate the effect of pH and solid concentration on shear yield stress of suspensions while zeta potential measurements of suspensions were used to explain the rheology results. Rheology results indicated that single mineral experiments showed that 5 and 10 vol.% of quartz and hematite had no shear yield stress whereas the one of nickel oxide was positive value. Shear yield stress of nickel oxide–quartz mixture and nickel oxide–hematite mixtures increased as increasing pH and solid concentration, and the value was higher than the one obtained with only nickel oxide. These results obtained with two-mineral mixture systems were explained by electrokinetic properties of the minerals, i.e. zeta potential of the minerals.     

Microstructure and analysis of oxide scales formed on Cr-Si-Ni compacts in air and H2O-containing atmosphere

The purpose of this study was to characterize the oxide scales formed on various Cr-Si-Ni compacts at 1273 K in air and H₂O-containing atmosphere by TEM. It was found that CrSi₂-(5-20)mass%Ni compacts form double layer scales, consisting of an outer Cr₂O₃ layer and an inner SiO₂ layer. The oxide scale changed from SiO₂- to Cr₂O₃-based scale with an increase in the Ni concentration. However, it was observed that the oxide scale formed in H₂O-containing atmospheres showed local SiO₂ growth into the substrate. This result suggests that the inward oxidant diffusion promotes the local growth of SiO₂ in the H₂O-containing atmospheres.     

Influence of swelling of noncrystalline regions in silk fibers on modification with methacrylamide

The degrees of swelling of noncrystalline regions of domestic and tussah silk fibers were investigated by measuring the small-angle X-ray scattering intensity of the fibers in wet conditions and analyzing the scattering intensity based on a two-phase model, i.e., crystalline regions and water-swollen noncrystalline regions. The influence of the degree of swelling of noncrystalline regions on the graft treatment of these fibers with methacrylamide was investigated. The changes in the structure caused by the graft treatment were also analyzed using the wide-angle X-ray diffraction measurements. As compared with the tussah silk fibers, the domestic silk fibers showed a larger degree of swelling of the noncrystalline regions, and gained a larger amount of resin by the graft treatment. The crystallites with smaller sizes in the tussah silk fibers were destroyed preferentially by the graft treatment. For the domestic silk fibers, the crystallites were destroyed more seriously and rather homogeneously independent of the crystallite sizes. © 1996 John Wiley & Sons, Inc.