Risk factors associated with recidivism among extrafamilial child molesters.

This study examined the predictive efficacy of 10 rationally derived, archivally coded variables for assessing reoffense risk among extrafamilial child molesters. Follow-up data on 111 child molesters who were discharged from the Massachusetts Treatment Center between 1960 and 1984 were used. Degree of sexual preoccupation with children, paraphilias, and number of prior sexual offenses predicted sexual recidivism. Juvenile and adult antisocial behavior, paraphilias, and low amount of contact with children predicted nonsexual victim-involved and violent recidivism. Area under the receiver-operating characteristic curves in all three analyses indicated discrimination that was substantially better than chance, ranging from .73 to .79. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development and characterization of magnetorheological polymer gels

Magnetorheological materials have been used in many applications in recent years. To develop new materials, polyurethane and silicone polymer gels were investigated. Rheology is qualitatively controlled for each system by controlling the concentration of reactants and diluents. The resulting polymers have solid, gel, or liquid states, depending on the crosslinking and dilution. The gels were characterized through kinetic analysis. Differential scanning calorimetry (DSC) was used with analysis methods to find the kinetic properties for diluted and undiluted polyurethane systems. Heat of reaction, order of reaction, preexponential constant, and activation energy were obtained from the experimental DSC data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2733–2742, 2002     

Measurement of the temperature field induced by dynamic crack growth in Beta-C titanium

The temperature increase at the tip of a dynamically propagating crack may have a significant effect on a material's mechanical properties, and hence on its dynamic fracture toughness. In order to start to understand this phenomena, measurements of the temperature field at the tip of a dynamically growing crack in Beta-C titanium alloy were performed using a linear array of high speed infrared detectors. The results show that a maximum temperature of 450°C is reached at the crack tip. In addition, the dynamic fracture toughness was measured for crack speeds from 0 to 500 m/s. In this speed range, the toughness appears to be constant. Estimates of the crack tip energy release rate and plastic strain rate are made using analysis of the experimental data.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Empirical efficiency and volume relationships for HPGe detectors

We have extended the empirical work of Vano et al.[1] relating the slope of the detector efficiency curve to the active volume for Ge detectors. The analysis was carried out using Monte Carlo techniques and covered a wide range of incident energies (200 keV-20 MeV) and active volumes (19.6 cm³–396 cm³). It is shown that the expression of Vano et al.[1] is only valid over the energy range 200 keV-3 MeV for active volumes <50 cm³. The upper bound decreases to 2 MeV for volumes of a few hundred cm³. The usable energy range can, however, be extended to 6 MeV by introducing higher order terms into the polynomial. Above this energy, the shape of the efficiency curve is better described by a non-linear function since linear forms fail simultaneously to fit large active volumes and high energies. We therefore propose a composite function which reduces to the form given in Vano et al. in the low energy/active volume limit. By comparison with the Monte Carlo results, it is estimated that relative efficiencies can be calculated to within 6% over the energy range 200 keV-20 MeV and active volumes 20 cm³–400 cm³. Since the largest errors occur for the smallest volumes, we recommend that for energies <3 MeV a two-fold approach be followed, i.e. using the expression of Vano et al.[1] for active volumes less than 50 cm³ and the proposed non-linear form for larger volumes. For high energy work (E > 3 MeV), we advocate the non-linear form. In this way, average errors can be kept 3%. Finally, we point out that the real power of the expression of Vano et al. lies not in predicting efficiencies, but active volumes.     

Smart help for operator performance

Our emphasis in this paper has been on the knowledge-based and cognitive issues pertinent for improved interactions between workers and manufacturing computer systems. We believe that these techniques are as necessary and applicable to manufacturing as to any other vocation, especially as the difference in collar color of shop people becomes less noticeable in their increasing role as knowledge workers.     

Dimensional scaling for impact cratering and perforation

The issue of generic scaling laws able to adequately predict (within better than 20%) cratering in semi-infinite targets and perforations through finite thickness targets was revisited. The approach used was to apply physical logic for hydrodynamics in a consistent manner able to account for chunky-body impacts such that the only variables needed are those directly related to known material properties for both the impactor and target. The analyses were compared and verified versus CTH hydrodynamic code calculations and existing experimental data. Comparisons with previous scaling laws were also performed to identify which (if any) were good for generic purposes. This paper is a short synopsis of the full report [1] available through the NASA Langley Research Center, LDEF Science Office.