Effects of Soy Protein on Physical and Rheological Properties of Wheat Starch

It is necessary to understand the interaction phenomena between proteins and polysaccharides for the development of starch‐based products with better physical and sensory properties. A simplified model system was chosen to study the influence of soy protein on physical and rheological properties of wheat starch and the possible interactions between them. Thermal and pasting behaviors of the slurries and texture properties, water retention capacity and ultra structure of soy protein‐wheat starch gels were analyzed. While soy protein isolate increased the viscosity of starch suspension during and after heating, gels with soy protein presented a weaker structure than wheat starch gels. Results suggested association between leached out material and swollen granule surface of starch with soy protein. Scanning electron microscopy reflected these changes in the gel ultrastructure.     

An extended (fractal) Overlapping Crack Model to describe crushing size-scale effects in compression

The inherent microstructural disorder strongly influences the mechanical behaviour of heterogeneous materials such as concrete and rocks. Tensile and compression tests, in fact, evidenced a localization of strain and dissipated energy in the post-peak softening branch, with a consequent scale dependence of the stress–strain response. For this reason, the well-known Cohesive Crack Model and the recently proposed Overlapping Crack Model are useful tools for describing the size effects in tension and compression, respectively. In general, strain localization, damage and fracture, which are phenomena affecting the failure of concrete, are not rigorously interpretable in the framework of continuum mechanics. On the other hand, since the flaw and the aggregate distributions in quasibrittle materials are often self-similar (i.e. they look the same at different magnification levels), the microstructure may be correctly modelled by fractal sets. In this paper, the approach based on fractal geometry, that has profitably been applied for the tensile behaviour, is applied to obtain a fractal overlapping law from uniaxial compression tests. According to this approach, it is assumed that energy dissipation, stress and strain are not defined with respect to the canonical physical dimensions, though on fractal sets presenting noninteger physical dimensions. As a consequence, these classical parameters should be substituted by fractal quantities, which become the true material properties.     

Liquid fuel utilization in SOFC hybrid systems

The interest in solid oxide fuel cell systems comes from their capability of converting the chemical energy of traditional fuels into electricity, with high efficiency and low pollutant emissions. In this paper, a study of the design space of solid oxide fuel cell and gas turbine hybrids fed by methanol and kerosene is presented for stationary power generation in isolated areas (or transportation). A 500 kW class hybrid system was analysed using WTEMP original software developed by the Thermochemical Power Group of the University of Genoa. The choice of fuel-processing strategy and the influence of the main design parameters on the thermoeconomic characteristics of hybrid systems were investigated. The low capital and fuel cost of methanol systems make them the most attractive solutions among those investigated here.     

Thermoeconomic impact on combined cycle performance of advanced blade cooling systems

In this work the thermoeconomic features of two different combined cycles using air “open loop” and steam “closed loop” cooled gas turbines are presented and compared in depth. In order to properly estimate both thermodynamic and thermoeconomic performance of the different combined cycles an analytical model of the blade cooling system has been developed in details and outlined in the paper. Internal Thermoeconomic functional analysis is not performed here, as only economic results are shown and discussed. The blade cooling detailed model, originally developed by TPG researchers, has been integrated into the web based modular code WTEMP, already validated for GT based cycles, developed in the last ten years by TPG. It is shown that the closed loop blade cooling configuration has the greatest potential in terms of thermodynamic efficiency and economic competitivity in the mid-term.     

The lean burn direct injection jet ignition gas engine

This paper presents a new in-cylinder mixture preparation and ignition system for various fuels including hydrogen, methane and propane. The system comprises a centrally located direct injection (DI) injector and a jet ignition (JI) device for combustion of the main chamber (MC) mixture. The fuel is injected in the MC with a new generation, fast actuating, high pressure, high flow rate DI injector capable of injection shaping and multiple events. This injector produces a bulk, lean stratified mixture. The JI system uses a second DI injector to inject a small amount of fuel in a small pre-chamber (PC). In the spark ignition (SI) version, a spark plug then ignites a slightly rich mixture. In the auto ignition version, a DI injector injects a small amount of higher pressure fuel in the small PC having a hot glow plug (GP) surface, and the fuel auto ignites in the hot air or when in contact with the hot surface. Either way the MC mixture is then bulk ignited through multiple jets of hot reacting gases. Bulk ignition of the lean, jet controlled, stratified MC mixture resulting from coupling DI with JI makes it possible to burn MC mixtures with fuel to air equivalence ratios reducing almost to zero for a throttle-less control of load diesel-like and high efficiencies over almost the full range of loads.     

PAC Characterization of Nontransformable Tetragonal t′ Phase in Arc-Melted Zirconia–2.8 mol% Yttria Ceramics

Tetragonal compact bodies obtained by quenching from the melt a ZrO₂–2.8 mol% Y₂O₃ commercial powder have been investigated between room temperature and 1150°C, using mainly perturbed angular correlations spectroscopy. The resulting nontransformable t′ phase observed by optical micrography is characterized at nanoscopic level by a hyperfine interaction describing defective and disordered Zr⁴⁺ neighborhoods very different from those of the regular tetragonal phase. A small amount of remaining Zr⁴⁺ sites corresponds to a scarcely distorted tetragonal structure. As the compacts are heated, two processes activate: the movement of vacancies and the gradual and irreversible conversion of t′ defective sites into less defective ones, probably resulting from oxygen absorption.     

Epigenetic and Genetic Factors Related to Curve Progression in Adolescent Idiopathic Scoliosis: A Systematic Scoping Review of the Current Literature

Adolescent idiopathic scoliosis (AIS) is a progressive deformity of the spine. Scoliotic curves progress until skeletal maturity leading, in rare cases, to a severe deformity. While the Cobb angle is a straightforward tool in initial curve magnitude measurement, assessing the risk of curve progression at the time of diagnosis may be more challenging. Epigenetic and genetic markers are potential prognostic tools to predict curve progression. The aim of this study is to review the available literature regarding the epigenetic and genetic factors associated with the risk of AIS curve progression. This review was carried out in accordance with Preferential Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. The search was carried out in January 2022. Only peer-reviewed articles were considered for inclusion. Forty studies were included; fifteen genes were reported as having SNPs with significant association with progressive AIS, but none showed sufficient power to sustain clinical applications. In contrast, nine studies reporting epigenetic modifications showed promising results in terms of reliable markers. Prognostic testing for AIS has the potential to significantly modify disease management. Most recent evidence suggests epigenetics as a more promising field for the identification of factors associated with AIS progression, offering a rationale for further investigation in this field.     

Immobilization of Lathyrus cicera Amine Oxidase on Magnetic Microparticles for Biocatalytic Applications

Amine oxidases are enzymes belonging to the class of oxidoreductases that are widespread, from bacteria to humans. The amine oxidase from Lathyrus cicera has recently appeared in the landscape of biocatalysis, showing good potential in the green synthesis of aldehydes. This enzyme catalyzes the oxidative deamination of a wide range of primary amines into the corresponding aldehydes but its use as a biocatalyst is challenging due to the possible inactivation that might occur at high product concentrations. Here, we show that the enzyme’s performance can be greatly improved by immobilization on solid supports. The best results are achieved using amino-functionalized magnetic microparticles: the immobilized enzyme retains its activity, greatly improves its thermostability (4 h at 75 °C), and can be recycled up to 8 times with a set of aromatic ethylamines. After the last reaction cycle, the overall conversion is about 90% for all tested substrates, with an aldehyde production ranging between 100 and 270 mg depending on the substrate used. As a proof concept, one of the aldehydes thus produced was successfully used for the biomimetic synthesis of a non-natural benzylisoquinoline alkaloid.     

IgG from Adult Atopic Dermatitis (AD) Patients Induces Thymic IL-22 Production and CLA Expression on CD4+ T Cells: Possible Epigenetic Implications Mediated by miRNA

Atopic dermatitis (AD) is a common relapsing inflammatory skin disorder characterized by immune-mediated inflammation and epidermal barrier dysfunction. The pathogenesis of AD is multifactorial and has not been fully elucidated to date. This study aimed to evaluate whether serum IgG from adult AD patients could modulate the thymic maturation of IL-22-producing T cells and CLA+ T cells of non-atopic infants. Given that miRNAs regulate immune response genes, we evaluated whether miRNA expression is also altered in cultured thymocytes. Thymocytes were cultured with purified IgG from AD patients or control conditions (mock, Intravenous-IgG (IVIg), non-atopic IgG, or atopic non-AD IgG). Using flow cytometry analysis, we assessed the expression of CLA and intracellular levels of IL-4, IFN-γ, and IL-22 on double-positive T cells (DP T), CD4 T cells, or CD8 T cells. We also investigated the frequency of IgG isotypes and their direct interaction with the thymic T cells membrane. The miRNA profiles were evaluated by the Illumina small RNA-seq approach. MiRNA target gene prediction and enrichment analyses were performed using bioinformatics. Increased frequencies of IL-22 and CLA+ producing CD4+ T cells cultured with IgG of AD patients was seen in non-atopic infant thymocytes compared to all control conditions. No alterations were observed in the frequency of IgG isotypes among evaluated IgG pools. Evidence for a direct interaction between IgG and thymic DP T, CD4 T, and CD8 T cells is presented. The small RNA-seq analysis identified ten mature miRNAs that were modulated by AD IgG compared to mock condition (miR-181b-5p, hsa-miR-130b-3p, hsa-miR-26a-5p, hsa-miR-4497, has-miR-146a, hsa-let-7i-5p, hsa-miR-342-3p, has-miR-148a-3p, has-miR-92a and has-miR-4492). The prediction of the targetome of the seven dysregulated miRNAs between AD and mock control revealed 122 putative targets, and functional and pathway enrichment analyses were performed. Our results enhance our understanding of the mechanism by which IgG can collaborate in thymic T cells in the setting of infant AD.