Analysis of run-in process for PC manufacturing

This paper gives a review of the methodology used to tune the run-in process of a PC manufacturing line. It shows in some detail the analysis carried-out on the test data gathered on the manufacturing line and presents a clear picture of the run-in process in order to choose the best compromise between process efficiency and costs.     

Phase equilibrium in a polarized saturated3He—4He mixture

We present experimental results on the phase equilibrium of a saturated³He−⁴He mixture, which has been cooled to a temperature of 10–15 mK and polarized in a⁴He circulating dilution refrigerator to a stationary polarization of 15%, 7 times higher than the equilibrium polarization in the external field of 7 T. The pressure dependence of the polarization enhancement in the refrigerator shows that the molar susceptibilities of the concentrated and dilute phase of a saturared³He-⁴He mixture are equal atp=2.60±0.04 bar. This result affects the Fermi liquid parameters of the dilute phase. The osmotic pressure in the dilute phase has been measured as a function of the polarization of the coexisting concentrated phase up to 15%. We find that the osmotic pressure at low polarization (<7%) agrees well with thermodynamics using the new Fermi liquid parameters of the dilute phase.     

Contact with out-group friends as a predictor of meta-attitudinal strength and accessibility of attitudes toward gay men.

Two studies examined the effects of cross-group friendships on heterosexuals' attitudes toward gay men. In Study 1, the authors tested the effects of cross-group friendships with gay men on out-group attitudes, meta-attitudinal strength, and attitude accessibility. The authors simultaneously explored mediational effects of intergroup anxiety. Path analysis showed that cross-group friendships were associated with meta-attitudinally stronger and more accessible out-group attitudes, and the effects on all 3 criterion variables were mediated by intergroup anxiety. In Study 2, the authors sought to replicate the basic results of Study 1, while additionally exploring mediational effects of closeness of cross-group friendship and moderational effects of perceived group typicality. Structural equation modeling showed that cross-group friendships were associated with meta-attitudinally stronger and more accessible out-group attitudes; friendships had indirect effects on all 3 criterion variables, via closeness of friendship and intergroup anxiety. Closeness of friendship only predicted lower intergroup anxiety, however, when the out-group friend was perceived as highly typical. The authors emphasize the importance of considering the nature of out-group attitudes more completely when evaluating the effectiveness of intergroup contact in reducing prejudice. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Design and development of a multichannel potentiometer for monitoring an electrode array and its application in flow analysis

A versatile potentiometer that works with electrode arrays in flow injection and/or monosegmented flow systems is described. The potentiometer is controlled by a microcomputer that allows individual, sequential multiplexed or random accesses to eight electrodes while employing only one reference electrode. The instrument was demonstrated by monitoring an array of seven flow-through ion-selective electrodes for Ag(+) and for three electrodes for Cl(-), Ca(2+) and K(+). The figures of merit of the individual and multiplexed (summed) readings of the electrode array were compared. The absolute standard deviation of the measurements made by summing the potential of two or more electrodes was maintained constant, thus improving the precision of the measurements. This result shows that an attempt to combine the signals of the electrodes to produce a more intense signal in the Hadamard strategy is feasible and accompanied by a proportional improvement in the precision of individual measurements. The preliminary tests suggest that the system can allow for 270 determinations per hour, with a linear range from 1.0 x 10(-2) to 1.0 x 10(-4) mol l(-1) for the three di inverted exclamation markerent analytes. Detection limits were estimated as 3.1 x 10(-5), 3.0 x 10(-6) and 1.0 x 10(-5) mol l(-1) for Cl(-), Ca(2+) and K(+), respectively.     

Effect of Particle Size on Monometallic and Bimetallic (Au,Pd)/C on the Liquid Phase Oxidation of Glycerol

The influence of metal particle size of monometallic and bimetallic supported catalysts (Au, Pd, Au–Pd)/C was studied using as a model reaction the liquid phase oxidation of glycerol. By tuning the metal particle size from 2 to 16 nm a progressive decrease of activity and simultaneously an increase in the selectivity to sodium glycerate was observed. Moreover, the influence of the temperature was studied and it was found that by increasing the temperature, only with a large particle size the formed glycerate was retained and not over-oxidized to tartronate.     

Efficient computation of the steady-state response of periodicnonlinear microwave circuits using a convolution-based sample-balancetechnique

The authors describe an efficient and robust approach to the computation of the steady-state response of periodic nonlinear microwave circuits. The problem of solving a set of differential equations is converted into that of solving a system of nonlinear algebraic equations using a technique called convolution-based sample balance. Although exact in all cases for which harmonic-balance techniques are exact, this technique does not require the use of discrete Fourier transforms, and calculating the Jacobian is straightforward. For the solution of the resulting system of nonlinear equations, an efficient and yet robust algorithm has been developed. In the examples given, savings in computational effort of over 85% are reported when this algorithm is compared with Newton's method     

Material constant sensitivity boundary integral equation for anisotropic solids

In this paper, the material constant sensitivity boundary integral equation is presented, and its numerical solution proposed, based on boundary element techniques. The formulation deals with plane problems with general rectilinear anisotropy. Expressions for the computation of sensitivities for displacements, tractions, strains and stresses are derived, both for boundary and interior points. The sensitivities can be computed with respect to the bulk material properties or to the properties of part of the domain (inclusions, coatings, etc.). To assess the accuracy of the proposed approach, the computed results are compared to analytical ones derived from exact solutions obtained by complex potential theory, when possible, or finite difference derivatives otherwise. Copyright © 2005 John Wiley & Sons, Ltd.     

Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.