Application of Multivariate Analysis in Mid-Infrared Spectroscopy as a Tool for the Evaluation of Waste Frying Oil Blends

Mid-infrared spectroscopy, in association with multivariate chemometric techniques, was employed for pattern recognition and the determination of the composition of waste frying oils (WFO); data are presented in terms of the percentage of soybean oil, palm oil and hydrogenated vegetable fat in frying oil blends. Principal component analysis (PCA) was performed using spectral data (3,000–600 cm⁻¹) to discriminate between the samples containing 100% soybean oil, 100% palm oil, 100% hydrogenated vegetable fat groups and their blends. Additionally, the results indicated that partial least squares (PLS) models based on mid-infrared spectra were suitable as practical analytical methods for predicting the oil contents in WFO blends. PLS models were validated by a representative prediction set, and the root mean square errors of prediction (RMSEP) were 2.8, 4.7 and 5.5% for palm oil, soybean oil and hydrogenated vegetable fat, respectively. The proposed methodology can be very useful for the rapid and low cost determination of waste frying oil composition while also aiding in decisions regarding the management of oil pretreatment and production routes for biodiesel production.     

Effect of alkylaluminum structure on Ziegler-Natta catalyst systems based on neodymium for producing high-cis polybutadiene

Summary  In this work, a laboratory scale process for producing polybutadiene with high content of cis-1,4 repeating units was studied. A Ziegler-Natta catalyst system constituted of neodymium versatate (catalyst), an alkylaluminum compound (alkylating agent and cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The solvent employed was a mixture of hexane and cyclohexane (80/20 v/v). The objective of this work was to evaluate the effect of alkylaluminum structure and the influence of Al/Nd (5 to 15) molar ratio of long chain alkylaluminium compound (tri(n-hexyl)aluminum) on catalyst activity and polybutadiene characteristics. The alkylaluminum compounds employed in this study were tri(i-butyl)aluminum, tri(n-hexyl)aluminum, tri(n-octyl)aluminum and di(i-butyl)aluminum hydride. The polybutadienes molar masses obtained were strongly influenced by the alkylaluminum structure. Polymers with the highest molar masses were obtained when tri(i-butyl)aluminum, tri(n-hexyl)aluminum and tri(n-octyl)aluminum were employed. However, polymers with the highest contents of cis-1,4 units and the lowest molar masses were produced when di(i-butyl)aluminum hydride was employed.     

Natural Brazilian Amazonic (Curauá) Fibers Modified with Polyaniline Nanoparticles

The surface of natural Brazilian amazonic fibers (curauá, Ananas erectifolius) was modified with polyaniline nanoparticles, through in situ preparation of polyaniline nanoparticles in presence of the curauá fibers. This allowed for a significant increase in the electrical conductivity of the fibers (≈2 500 times). As the electrical resistivity of the modified fibers is a function of the applied external pressure, the produced composites can be used as a cheap pressure‐sensing material. The modified materials were also characterized by FT‐IR, XPS and SAXS, and the obtained results were used to explain some of the observed characteristics of the materials.

     

Effect of the molecular architecture of graft copolymers on the phase morphology and tensile properties of PS/EVA blends

Graft copolymers of poly(ethylene‐co‐vinyl acetate) (EVA) grafted with polystyrene (PS) with different molecular weight and different EVA/PS ratio were prepared by coupling reaction between acyl chloride functionalized PS (PS‐COCl) and hydrolyzed EVA. PS‐COCl with controlled molecular weight was prepared by anionic polymerization of styrene, followed by end capping with phosgene. The effect of the molecular architecture of the graft copolymer on the compatibilization of PS/EVA blends was investigated. Substantial improvement in the elongation at break and ductility was observed using the graft copolymer with PS segments with molecular weight as high as 66,000 g/mol and with a PS proportion equal or higher than EVA. The effect of the compatibilization on the morphology was also investigated by scanning electron microscopy and atomic force microscopy. The blend that presented the highest value of elongation at break also displayed dispersed phase constituted by inclusions of the PS phase inside the EVA particle forming a cocontinuous structure, as observed by AFM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Eversible Pheromone Gland in a Melolonthine Beetle, Holotrichia parallela

The morphology of an eversible pheromone gland of a melolonthine beetle, Holotrichia parallela (Coleoptera: Scarabaeidae: Melolonthinae), was characterized. Through careful dissection of the gland and GC-MS analysis of tissue extracts, we determined that the pheromone is produced in the posterior part of a ball-shaped sac exposed during female calling. Light microscope observation of the posterior part of the gland revealed a layer of cuticular epithelium composed of columnar cells, which was assigned as the tissue involved in pheromone production. Other morphological features, such as a soft cuticular layer adjacent to the epithelium and groups of retractor muscles attached to the gland, were characterized according to their functions. Paired accessory glands, which in some other melolonthine species house symbiotic bacteria that produce a sex attractant, were found not to be involved in pheromone production in H. parallela.     

Corrosion behaviour of experimental copper–antimony–molybdenum carbon steels in industrial and marine atmospheres and in a sulphuric acid aqueous solution

Low alloyed carbon steels are used in several applications as in automotive, home appliances and civil industries. Sb-bearing steels have been developed to withstand acid condensation, mainly to exhibit corrosion resistance to sulphuric acid aqueous solutions. This work is aimed at studying the corrosion resistance of three experimental low alloyed carbon steels with additions of copper, antimony and molybdenum using the electrochemical impedance spectroscopy (EIS) in a sulphuric acid aqueous solution, and field tests in industrial and marine atmospheres. The field tests showed the mass loss of antimony–molybdenum carbon steels was higher compared to that of other steels. The alloyed carbon steels with copper and antimony additions showed the highest atmospheric corrosion resistance evaluated by using field tests in industrial and marine environments. The molybdenum-bearing steels showed the highest corrosion resistance in a sulphuric acid solution, measured by using the EIS.     

The effect of hydroxyl‐terminated polybutadiene‐grafted carbon fiber on the impact performance of carbon fiber–epoxy resin composites

Carbon fiber (CF) containing 1.4 and 2.1 mmol/g of —COOH and —OH groups, respectively, was functionalized by using an excess of tolylene‐2,4‐diisocyanate. The NCO‐modified CF was submitted to a graft reaction with hydroxyl‐terminated polybutadiene (HTPB). The HTPB‐grafted carbon fiber was employed as reinforcing agent for epoxy resin‐based composites. The presence of the flexible HTPB at the interface between the fiber and the matrix resulted in a substantial improvement on impact strength. Additional improvement on toughness was achieved by using epoxy matrix containing dispersed phase of HTPB. The composite morphology was also studied by scanning electron microscopy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1424–1431, 1999