Impact of the extraction procedure on the kinetics of anthocyanin and colour degradation of roselle extracts during storage

BACKGROUND: The stability of anthocyanins and colour of aqueous extracts from roselle (Hibiscus sabdariffa L.) was investigated during storage at 4–45 °C. The effect of the extraction procedure (cold or hot extraction with or without pasteurisation) on the kinetic behaviour was determined. RESULTS: Data analysis showed first‐order kinetics for the evolution of anthocyanin content, colour density, colour strength and browning index. Three models (Arrhenius, Eyring and Ball) were used to represent the temperature dependence of the reaction rates. The three models allowed the prediction of colour modifications according to the storage temperature over 6 months. Activation energies ranged from 22 to 26 kJ mol^?1 for anthocyanin degradation and from 18 to 34 kJ mol^?1 for colour parameter modification. The degradation rate during storage depended on the extraction procedure. When heated, the extracts were clearly less stable. Their colour changed faster during storage especially when hot water and pasteurisation were used. CONCLUSION: Although the anthocyanin content and initial colour were not modified, the extraction conditions, especially temperature, greatly affected the stability of the extracts during storage. Further studies are needed to understand the mechanisms involved. Copyright © 2011 Society of Chemical Industry     

Project Tocoen. The Fate of Selected Organic Compounds in the Environment. Part XXVIII. Levels of PAHs and Some Halogenated POPs in Ambient Air in Czech Republic

Abstract

Concentrations of polyaromatic hydrocarbons (PAHs), chlorinated pesticides, polychlorinated biphenyls, dibenzo-p-dioxins and dibenzo-p-furans (PCDDs/Fs) in ambient air in Ko?etice, a background locality in the South Bohemia, have been estimated in the period from July to December 1994. The 24-hours samples have been taken by the means of a high-volume sampler. Sample analysis involved Soxhlet extraction of polyurethane foam, extract preconcentration and chromatographic clean-up procedure followed by HPLC determination of PAHs with fluorescence detection, GC/ECD determination of chlorinated pollutants, and GC/MS determination of PCDDs/Fs. The results of this first detailed study undertaken in Czech Republic are compared with the data obtained by similar projects in industrial and/or urban areas in the Czech Republic and in rural or urban areas in other European countries.     

Evaluation of chlorogenic acid and its metabolites as potential antioxidants for fish oils

The antioxidant effects on cod liver oil (CLO) of chlorogenic acid (CGA) and its metabolites, caffeic acid (CA) and quinic acid (QA), were investigated. All three chemicals were separately added to CLO at a concentration range of 0.001–0.080 wt‐% and tested by Rancimat. CA was the best antioxidant; its antioxidant effect was directly proportional to the dose added, but only within the concentration range of 0.005–0.050 wt‐%. QA did not show any effect on CLO oxidation, while CGA revealed itself as a weak antioxidant. Cytotoxicity was also evaluated by using murine 3T6 fibroblasts treated for 24 h with CGA, CA and QA at a concentration range of 0.1–5.0 mM. QA did not have an influence on cell proliferation, while CGA and CA showed a significant anti‐proliferative activity already at a concentration of 0.1 mM. Finally, compounds similar to the standard 8‐iso prostaglandin F_2α, called CLO‐“isoprostanes”‐like compounds, were isolated. At high temperature (100 and 110 °C) CLO‐“isoprostanes‐like” compounds did not show a relevant pro‐oxidant action on the refined olive oil to which they were added in variable amounts. On the contrary, the CLO‐“isoprostanes”‐like compounds significantly decreased the antioxidant effectiveness of CA. Indeed, at a CLO‐“isoprostanes‐like” compound dose of 300 µg, the antioxidant effectiveness of CA was halved.     

Influence of ionic strength and HPMC viscosity grade on drug release and swelling behavior of HPMC matrix tablets

Matrix tablets containing paracetamol and hydroxypropyl methylcellulose (HPMC 2906) of different viscosity grades (50, 400, 1500, and 4000 mPa·s) were evaluated for drug release and change in matrix tablet mass [ΔM (%)] after exposure to 0.09, 0.15, 0.31, and 0.52M ionic strengths of dissolution media. At 0.09 and 0.15M ionic strength, drug‐release profiles reflected the extended release characteristic; in addition the increase in ΔM was slow and continuous within first few hours. At 0.31M the higher viscosity grade matrices showed extensive initial swelling and the loss of extended release whereas at 0.52M a similar tablet performance is observed for the matrices of all viscosity grades. Notably, when extensive increase in ΔM occurs in the very beginning of exposure to medium the loss of extended release from the matrix is expected. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43604.     

Comparison of selected physical and mechanical properties of densified beech wood plasticized by ammonia and saturated steam

Gaseous ammonia treatment in combination with densification of wood has been known for several decades, but these days there is no industrial production of materials modified in this way; also, little has been published in this area of wood science. In this study, selected physical and mechanical properties, i.e. density profile, bending strength, hardness and moisture absorption were investigated for Lignamon (1), which was obtained from the Czech industrial production. Selected properties were also investigated using steam-densified beech (2) and native beech (3) and compared with each other. Densitometry of Lignamon showed a large variability in the density profile compared to that of only densified beech. It is affected by the degree of densification, temperature and moisture gradients, and their relationship to the glass transition of the wood cell wall. Modulus of elasticity, hardness, moisture exclusion and anti-swelling efficiency of Lignamon are enhanced compared to densified beech. The enhanced dimensional stability and lower hygroscopicity of Lignamon are probably caused by heat treatment during the process. Further investigation will be carried out with self-produced Lignamon samples.     

High Performance Index as a tool to identify the best combination of pearled fractions and durum wheat genotypes for semolina and pasta colour improvement

Debranning was applied to six durum wheat genotypes to identify specific fractions rich in carotenoids and lower in enzymatic activities useful for improving pasta colour. Six sequential debranning steps, each of 30 s, were applied. β-carotene, lutein, α-tocopherol and ash content and hydroperoxidation and bleaching activities of lipoxygenase were determined in all pearled fractions. A wide variability among the genotypes regarding the level of all components has been found. Most of the parameters were higher in the pearled fraction at 30 s than wholemeal. Compared to the latter fraction, a significant decreasing trend for both lipoxygenase activities and α-tocopherol and ash content was subsequently observed, while β-carotene decreased more slightly. Lutein content remained quite stable in all subsequent pearled fractions. The pearled fraction of the Ofanto obtained at 90 s of debranning was identified as the best genotype/pearled fraction combination through our High Performance Index tool.     

Functional Patterning of Biopolymer Thin Films Using Enzymes and Lithographic Methods

Two different lithographic techniques for the patterning of thin biopolymer films are developed. The first method is based on using a microstructured elastomeric mold for the structuring of thin films of regenerated cellulose. The thin films are manufactured by spin‐coating of trimethylsilyl cellulose (TMSC) and subsequent regeneration. The microchannels formed by the mold and the cellulose film are filled with a cellulase solution by capillary action. In the areas exposed to the enzyme solution, the cellulose film is digested, whereas the area in contact with the mold is protected from the enzymatic activity. Optical thickness measurements, atomic force microscopy and fluorescent staining confirm a successful patterning of cellulose on several substrates by this method. The second method is based on the structured regeneration of thin TMSC films. TMSC surfaces are protected with metal masks and exposed to vapors of hydrochloric acid. These treatments result in hydrophilic cellulose structures surrounded by hydrophobic TMSC with differing physicochemical properties. Treatments of the obtained structures with cellulases allow the selective removal of pure cellulose, whereas a TMSC pattern remains on the surface. These TMSC can be regenerated back to pure cellulose by treatments with vapors of hydrochloric acid. The developed methods allow the effective fabrication of micropatterned biopolymer thin films suitable for further functionalization and application in, e.g., bioanalytical devices. This is shown by the immobilization and detection of single‐stranded DNA on structured cellulose surfaces. Owing to the versatility of both patterning approaches the methods can be further extended to other combinations of substrates and enzymes.     

Monolithic Perovskite/Silicon Tandems with >28% Efficiency: Role of Silicon-Surface Texture on Perovskite Properties

Textured silicon wafers used in silicon solar cell manufacturing offer superior light trapping, which is a critical enabler for high-performance photovoltaics. A similar optical benefit can be obtained in monolithic perovskite/silicon tandem solar cells, enhancing the current output of the silicon bottom cell. Yet, such complex silicon surfaces may affect the structural and optoelectronic properties of the overlying perovskite films. Here, through extensive characterization based on optical and microstructural spectroscopy, it is found that the main effect of such substrate morphology lies in an altering of the photoluminescence response of the perovskite, which is associated with thickness variations of the perovskite, rather than lattice strain or compositional changes. With this understanding, the design of high-performance perovskite/silicon tandems is rationalized, yielding certified power conversion efficiencies of >28%.     

Channel Estimation Method for OFDM in Low SNR Based on Two-dimensional Spreading

In this paper, we present a channel estimation method based on two-dimensional signal spreading applicable to orthogonal frequency multiple access multicarrier systems. Our method exploits a spreading of a transmitted data signal as well as a pilot signal over the assigned frequency range and time period. As a spreading sequence we exploited orthogonal Walsh–Hadamard sequences. When compared with traditional pilot symbol based channel estimation, our method is beneficial in low signal to noise ratio (SNR). For a comparison of our method with state-of-the-art channel estimation method, we utilized an open source LTE downlink simulator developed at TU Vienna. This enables a reproducibility of our results. Considering the LTE system, our method outperforms the traditional approach in typical range of SNR from \(-\) 5 to 10 dB. For a comparison of a throughput performance, a number of channel models has been employed.