Additional effort estimation due to ergonomic conditions in order picking systems

Within a warehouse, the picking activity often relies on human operators. Therefore, when designing and evaluating a manual picking system, it is important to consider that, besides the high flexibility the pickers are able to warrant, they inevitably require an additional effort due to their ergonomic working conditions. In this paper, the authors propose a new model to consider such additional effort, starting from the concepts of human availability and rest allowance. The new method allows the evaluation of the current configuration of a certain warehouse, considering two different operative situations (directly employed operators and indirectly employed ones). Moreover, it makes it possible to estimate and to understand the benefits that can be achieved by introducing some ergonomic improvements. The proposed procedure has also been applied to a real industrial case study.     

Large yacht hull measurement by integrating optical scanning with mechanical tracking-based methodologies

In the shipbuilding industry, the manufacturing of large yacht hulls is a complex process. Metal hulls are traditionally manufactured by welding pre fabricated large steel panels to form the external superstructure. A surface finishing process is then carried out in order to obtain a final target surface having a smooth curvature. The methodologies manly rely on manual processes based on the measurement of the as built hull shape through simple testing instrumentation. Well-experienced workers are required, and a great amount of time is usually wasted, thus affecting the overall shipyard competitiveness.     

The antioxidant activity of teas measured by the FRAP method adapted to the FIA system: Optimising the conditions using the response surface methodology

This study proposes a FRAP assay adapted to FIA system with a merging zones configuration. The FIA system conditions were optimised with the response surface methodology using the central composite rotatable design. The optimisation parameters studied were: the carrier flow rate, the lengths of the sample and reagent loops, and reactor length. The conditions selected in accordance with the results were: carrier flow rate of 1.00 ml/min, length of the loops 18.2 cm and length of the reaction coil 210.1 cm. The detection and quantification limits were, respectively, 28.6 and 86.8 μmol/l Fe²⁺, and the precision was 1.27%. The proposed method had an analytical frequency of 30 samples/h and about 95% less volume of FRAP reagent was consumed. The FRAP assay adapted to the FIA system under the optimised conditions was utilised to determine the antioxidant activity of tea samples.     

Simulation of retronasal aroma of white and red wine in a model mouth system. Investigating the influence of saliva on volatile compound concentrations

The influence of saliva on aroma release from white and red wines was studied in a model mouth system. Aroma compounds were analysed in the dynamic headspace of wines by solid phase micro extraction/gas chromatography with flame ionization detection. Volatile compounds were identified by solid phase micro extraction/gas chromatography-mass spectrometry, resulting in a total of 43 compounds in white wine and 41 in red wine. The results showed a greater influence of saliva on aroma release in white wine than red wine. In white wine treated with human saliva, esters and fusel alcohols, responsible for fruity and fusel oil odours, were reduced of 32–80%; by contrast, the concentration of 2-phenylethanol and furfural, responsible for rose and toasted almond notes, increased by 27% and by 155%, respectively. In red wine, treated with human saliva, only a few esters decrease, with a reduction of 22–51% due to protein-binding ability of polyphenols that are able to inhibit the activity of the saliva. C-13 norisoprenoids, vitispirane (eucalyptol) and TDN (kerosene), decreased both in white and red wine, showing a comparable variation while, for β-damascenone, the variation was insignificant.     

High‐tuning‐range CMOS band‐pass IF filter based on a low‐Q cascaded biquad optimization technique

A design procedure for high‐order continuous‐time intermediate‐frequency band‐pass filters based on the cascade of low‐Q biquadratic cells is presented. The approach is well suited for integrated‐circuit fabrication, as it takes into account the maximum capacitance spread dictated by the available technology and maximum acceptable sensitivity to component variations. A trade‐off between noise and maximum linear range is also met. A novel, wide‐tuning‐range transconductor topology is also described. Based on these results, a 10‐pole band‐pass filter for a code division multiple‐access satellite receiver has been designed and tested. The filter provides tunable center frequency (f₀) from 10 to 70 MHz and exhibits a 28‐MHz bandwidth around f₀ = 70 MHz with more than 39‐dB attenuation at f₀/2 and 2f₀. Third‐order harmonic rejection is higher than 60 dB for a 1‐Vpp 70‐MHz input, and equivalent output noise is lower than 1 mV_rms. The circuit is fabricated in a 0.25‐µm complementary metal oxide semiconductor process, and the core consumes 12 mA from a 2.5‐V supply, offering the best current/pole ratio figure. The die area resulted to be 0.9 × 1.1 mm². Copyright © 2014 John Wiley & Sons, Ltd.     

Synergistic effect of graphite nanoplatelets and glass fibers in polypropylene composites

In this study, polypropylene (PP) composites reinforced with short glass fibers (GF) and exfoliated graphite nanoplatelets were obtained by melt compounding followed by injection molding. Morphological observations and quasi‐static tensile tests were carried out in order to investigate how the morphology and the mechanical properties of the composites were affected by the combined effect of two fillers of rather different size scales (i.e., micro‐ and nanoscale). The results indicate that the dispersion of the nanofiller in the PP matrix promoted the formation of a stronger interface between the matrix and GF, as indicated by the increase of the interfacial shear strength determined by the single‐fiber microdebonding test. Concurrently, a significant improvement of the tensile modulus and impact strength of the composites was observed, with small changes in the processability of hybrid composites compared to that of GF composites, as confirmed by rheological measurements. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41682.