Participatory Modeling Workshops in a Water-Stressed Basin Result in Gains in Modeling Capacity but Reveal Disparity in Water Resources Management Priorities

Participatory modeling workshops were held in Sonora, México, with the goal of developing water resources management strategies in a water-stressed basin. A model of the water resources system, consisting of watershed hydrology, water resources infrastructure, and groundwater models, was developed deliberatively in the workshops, along with scenarios of future climate and development. Participants used the final version of the water resources systems model to select management strategies. The performance of the strategies was based on the reliability of meeting current and future demands at a daily time scale over a year’s period. Pre- and post-workshop surveys were developed and administered. The survey questions focused on evaluation of participants’ modeling capacity and the utility and accuracy of the models. The selected water resources strategies and the associated, expected reliability varied widely among participants. Most participants could be clustered into three groups with roughly equal numbers of participants that varied in terms of reliance on expanding infrastructure vs. demand modification; expectations of reliability; and perceptions of social, environmental, and economic impacts. The wide range of strategies chosen and associated reliabilities indicate that there is a substantial degree of uncertainty in how future water resources decisions could be made in the region. The pre- and post-survey results indicate that participants believed their modeling abilities increased and beliefs in the utility of models increased as a result of the workshops.     

Surface properties of ZSM-5 modified by phosphorus

Phosphorus modification of ZSM-5 leads to extra framework P⁵⁺ and probably incorporation of +3 valence state of P in the framework. The resulting system has increased Brønsted acidity. Theoretical calculations also favour the postulate that phosphorus in +3 valence state can be incorporated into the lattice.     

Substrate-mediated interactions and intermolecular forces between molecules adsorbed on surfaces

Adsorbate interactions and reactions on metal surfaces have been investigated using scanning tunneling microscopy. The manners in which adsorbates perturb the surface electronic structure in their vicinity are discussed. The effects these perturbations have on other molecules are shown to be important in overlayer growth. Interactions of molecules with surface steps are addressed, and each molecule's electron affinity is shown to dictate its adsorption sites at step edges. Standing waves emanating from steps are demonstrated to effect transient molecular adsorption up to 40 A away from the step edge. Halobenzene derivatives are used to demonstrate how the surface is important in aligning reactive intermediates.     

Rheological,mechanical, and morphological studies of epoxy/poly(methyl methacrylate) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) of epoxy resin and poly(methyl methacrylate) (PMMA) were synthesized. Methyl methacrylate (MMA) was polymerized by free radical mechanism with azo‐bis‐isobutyronitrile in the presence of oligomeric epoxy resin (DGEBA), and hexahydrophthalic anhydride as crosslinking agent. The gelation and vitrification transitions during cure/polymerization processes have been examined using parallel‐plates rheological technique. From differential scanning calorimetry and rheological techniques, it was suggested that both curing and polymerization processes occur simultaneously. However, the gelation time was longer for the semi‐IPN than those observed for the cure of pure DGEBA or polymerization of MMA. The gelation time increased significantly when 5% of MMA was employed, suggesting a diluent effect of the monomer. Higher amount of MMA resulted in a decrease of gel time, probably because of the simultaneous polymerization of MMA during the curing process. Structural examination of the semi‐IPNs, using scanning electron microscopy, revealed phase separation in nanoscale size for semi‐IPNs containing PMMA at concentrations up to 15%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Natural rubber–isotactic polypropylene thermoplastic blends

Thermoplastic elastomers, prepared by melt blending of natural rubber (NR) and isotactic polypropylene (PP) through a dynamic vulcanization technique, were developed during the later 1970s. However, they have certain drawbacks due to thermal degradation and higher molecular weight of NR. In the study reported here, NR was masticated to different levels prior its addition to isotactic polypropylene to improve the flow properties and to reduce the incompatibility resulting from molecular weight mismatch of NR/PP thermoplastic blends. Mixing energy curves of uncrosslinked blends and those of dynamically vulcanized blends crosslinked using different cure systems were compared. The mixing energy curves of blends containing NR of different molecular weight (M _n) and two grades of PP (injection and film grades) were also compared. Technological and processing properties of the dynamically vulcanized (sulphur and peroxide cure systems) and unvulcanized blends were compared with those of the samples containing unmasticated NR. The results indicated that a number average molecular weight in the range 4 × 10⁵ for NR increased the procoessability without significantly affecting the technological properties of NR/PP thermoplastic blends. Among the three cure systems studied Luperox 101 and dicumyl peroxide gave better technological properties than the sulphur‐cured samples. Two antioxidants, viz. quinoline (TDQ) and imidazole (MBI) type, were tried in NR/PP blends. It was found that TDQ imparts better aging resistance compared to MBI. The improvement in processability due to the reduction in molecular weight of natural rubber by mastication is more noticeable in the case of peroxide vulcanized blends compared to sulphur vulcanized samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2063–2068, 2004     

Behavioural responses to risk on remote outcomes

Computer mediation of communication allows interaction with events remote in space or time. However, the uptake and use of videotechnology requires an understanding of its effects upon willingness to take risks. To understand how responses to remote events are influenced by computer mediation, the present study compared responses to collocated outcomes with those conveyed over a videolink or as pre-recordings. Willingness to risk on an outcome was quantified using wagering behaviour during a simulated game of roulette: measuring preferred outcome format, levels of risk sought, and times required to make decisions. Participants tended to be more confident of winning and preferred the collocated version of roulette. Participants took greater risks with pre-recorded video outcomes and tended to spend more time locating bets. For videolinked outcomes, participants were more cautious, hedging their bets, and taking more time deliberating the odds. Although the amounts wagered did not change, a potential predictability in pre-recordings appears to encourage risk taking, while the reduced presence inherent in real-time videolinks engenders caution.     

Characterizing peers communities and dynamics in a P2P live streaming system

Despite the large number of works devoted to understand P2P live streaming applications, most of them put forth so far rely on characterizing the static view of these systems. In this work, we characterize the SopCast, one of the most important P2P live streaming applications. We focus on its dynamics behavior as well as on the community formation phenomena. Our results show that SopCast presents a low overlay topology diameter and low end-to-end shortest path. In fact, diameter is smaller than 6 hops in almost 90 % of the observation time. More than 96 % of peers’ end-to-end connections present only 3 hops. These values combined may lead to low latencies and a fast streaming diffusion. Second, we show that communities in SopCast are well defined by the streaming data exchange process. Moreover, the SopCast protocol does not group peers according to their Autonomous System. In fact, the probability that a community contains 50 % of its members belonging to the same AS (when we observe the largest AS of our experiments) is lower then 10 %. Peers exchange more data with partners belonging to the same community instead of peers inside the same AS. For the largest AS we have, less than 18 % of peer traffic has been exchanged with another AS partners. Finally, our analysis provides important information to support the future design of more efficient P2P live streaming systems and new protocols that exploit communities’ relationships.