Patterns of Iridoid Glycoside Production and Induction in Plantago lanceolata and the Importance of Plant Age

Induction of allelochemicals is one way that plants efficiently deploy defenses against herbivory. In two separate experiments we investigated the time course of this inductive response and the importance of the timing of herbivory for Plantago lanceolata (Plantaginaceae). We found a localized induced response of catalpol and the ratio of catalpol to total iridoid glycosides in damaged leaves that was evident at d 6 after caterpillars of the specialist Junonia coenia were put onto the plants. On the whole plant level, we detected small, but significant changes in the iridoid glycoside metabolism of P. lanceolata on several different days following herbivory. We also found considerable change in the amounts of allelochemicals produced during P. lanceolata's ontogeny. This ontogenetic effect might help to explain some of the reasons why induction may be difficult to detect in P. lanceolata. We also investigated the importance of the timing of herbivory on P. lanceolata's inductive response, but neither herbivory after 5 wk of growth nor after 6 or 7 wk of growth induced an increase in aucubin or catalpol.     

Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite

PMMA, poly(metheylmethacrylate), nanocomposites were made by in situ radical polymerization of MMA, methylmethacrylate, with colloidal silica (ca. 12 nm) to study the effects of nanoscale silica particles on the physical properties and flammability properties of PMMA. Transparent samples resulted and the dispersity of the particles was examined by transmission electron microscopy and atomic force microscopy. The addition of nanosilica particles (13% by mass) did not significantly change the thermal stability, but it made a small improvement in modulus, and it reduced the peak heat release rate roughly 50%. Last, the flame‐retardant mechanism provided by the addition of nanosilica particles in PMMA is discussed. Published 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2072–2078, 2003     

The relationship between strength and the composition and fineness of cement

Data from new experiments and from work published during the past 40 years are subjected to regression analysis to determine the relationship between strength and the composition and fineness of cement. The original authors differed in their opinions on the relative importance of C₃S and C₃A. The controversy is examined against a background of experience with a group of materials that are representative of Portland cement in general, and in terms of an analysis based on a model in which, during the first weeks of hardening, the strength developed by C₃S depends on the proportion of C₃A in the cement.     

Modelling of a RDC using a combined CFD-population balance approach

In the present study we propose an extension of the Euler/Lagrangian approach for liquid-liquid two phase flows when the volume fraction of the dispersed phase is not small. The continuous phase velocity is obtained by solving the Reynolds-averaged Navier-Stokes equations augmented with the k-ε turbulence model. The motion of the dispersed phase is calculated by solving the equations of motion taking into account inertia, drag and buoyancy forces. The coupling between the phases is described by momentum source terms and the terms that account for turbulence generation by the droplets’ motion. Collision and breakage of the droplets are treated by a single particle Monte-Carlo stochastic simulation method. This method is based on a mass flow formulation and operator splitting technique. For validation of the numerical procedure the droplet size distribution and flow fields in a rotating disc contactor are calculated and compared with the existing experimental results.     

Impact of sand and filler materials on the hydration behavior of calcium aluminate cement

In earlier work, we have observed discrepancies relating to the early hydration of calcium aluminate cement (CAC) when comparing data from heat flow calorimetry of CAC paste with results from mortar strength tests using the crushing method. Here, we investigated on this phenomenon and found that the sand which is used as a filler exerts a major influence on CAC hydration resulting in acceleration. Furthermore, in particular fine filler materials such as, for example, microsilica, fine limestone powder, and especially α- and γ-Al₂O₃ also produced a strong hydration accelerating effect which is dependent on their specific surface area. The mechanism underlying the acceleration is that under alkaline conditions their negative surface charge attracts calcium ions as was confirmed via inductively coupled plasma atomic emission measurements. Such a layer generates favourable conditions for the nucleation of CAC hydration products (C-A-H phases). The resulting crystalline hydrates which form on the surface of the filler particles submerged in CAC cement pore solution were visualized via SEM imaging. This way, specifically selected fillers can significantly accelerate CAC hydration and save precious lithium salts which are commonly used to boost the early strength of CAC.     

Low-temperature phase formation in the SrF2–LaF3 system

Phase formation in the SrF₂–LaF₃ system was studied at temperatures ranging from 300°C to 450°C using nitrate flux. The solubility of LaF₃ in SrF₂ decreases with decreasing temperature. The equilibrium width of the solid solution region Sr_1−xLa_xF_2+x at 400°C, it is 44.6 ± 0.4 mol% LaF₃ (x = 0.446), at 350°C — 38.3 ± 0.7 mol% LaF₃ (x = 0.383), and decreases almost to zero at 300°C.     

A New Research Infrastructure for Investigating Flow Hydraulics and Process Equipment at Critical Fluid Properties

An optimized equipment design for natural gas processing and liquefaction plants becomes increasingly difficult with changing process conditions: Particularly low values of surface tension create rising challenges on the design of phase separators and column internals. The TERESA test rig at HZDR was designed to allow the investigation of multiphase thermohydraulics and phase separator performance under critical fluid properties in industrial dimensions. A versatile pipe test section is available in DN200 and equipment internals may be tested in a sectional DN300/DN500 test separator. The applied test fluid shows a high vapor-liquid density difference between 1470 and 940 kg m⁻³, viscosity as low as 0.12 mm²s⁻¹, and surface tension down to 1.3 mN m⁻¹. Volumetric liquid and vapor flow rates may be varied up to 9 and 530 m³h⁻¹ in the test rig, respectively.     

Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

Monitoring the curing processes of epoxy oligomers with partially substituted polyethoxymetallosiloxanes by IR spectroscopy and thermomechanical analysis

In this work, the curing of «ED-20» epoxy resin with partially siloxy-substituted aluminum, iron, and zirconium siloxanes that we obtained previously was studied. The initial content of a metallosiloxane in the compositions was 5–50 wt% with respect to the resin. In all the cases, thermal curing was used to obtain a series of samples in the form of solid homogeneous materials. The fact of the epoxy ring opening in the resin was confirmed by IR spectroscopy. The catalytic properties of the metal atom in a metallosiloxane were found to affect the curing process. The samples demonstrate rather a high resistance to thermooxidative destruction, and in most cases, their glass transition temperatures are lower than those obtained upon standard curing of «ED-20» resin with triethylenetetramine. Partially siloxy-substituted metalloalkoxysiloxanes can be efficient agents for curing and formation of a hybrid material based on epoxy resins.